Beautyrest BR54-0909

Download PDF
Contents

Beautyrest Heated Electric Blanket User Manual

Model: BR54-0909

Introduction

Thank you for choosing the Beautyrest Heated Electric Blanket. This blanket is designed to provide warmth and comfort with advanced features such as Secure Comfort Technology for virtually zero EMF emissions, multiple heat settings, and an auto shut-off function. Please read this manual thoroughly before use to ensure safe and optimal operation.

Beautyrest Queen Black Heated Electric Blanket on a bed with two controllers

Image: The Beautyrest Queen Black Heated Electric Blanket displayed on a bed, showcasing its plush texture and the two attached controllers.

Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury.

  • Do not use with infants, children, invalids, or anyone insensitive to heat.
  • Do not use if wet.
  • Do not use with a damaged cord or plug.
  • Do not use with pointed or sharp objects.
  • Do not use if folded, bunched, or tucked in.
  • Do not dry clean. Dry cleaning solvents may damage the insulation of the heating element.
  • Do not iron the blanket.
  • Do not use with adjustable beds unless specifically designed for it.
  • Always unplug the blanket when not in use.
  • Keep the control unit away from drafts or open windows to prevent it from shutting off prematurely.

Package Contents

  • 1 x Beautyrest Heated Electric Blanket (Queen size: 90 in x 84 in)
  • 2 x Digital Controllers (for Queen and King sizes; Twin and Full sizes include one controller)

Setup Instructions

  1. Unpack the Blanket: Carefully remove the blanket from its packaging. Ensure there are no visible damages to the blanket or the controllers.

  2. Position the Blanket: Lay the heated blanket flat on your bed, ensuring it is not folded, bunched, or tucked in. The connectors should be positioned at the foot of the bed.

    Beautyrest Heated Electric Blanket laid flat on a bed

    Image: The heated blanket properly spread out on a bed, ready for connection.

  3. Connect the Controllers: For Queen and King sizes, connect each controller cord to the corresponding connector on the blanket. Ensure the connection is firm and secure. For Twin and Full sizes, connect the single controller.

  4. Plug into Power Outlet: Plug the power cord(s) from the controller(s) into a 110V-120V @60Hz electrical outlet. Do not use with extension cords or power strips.

Operating Instructions

The Beautyrest Heated Electric Blanket features intuitive controls for personalized comfort.

Close-up of Beautyrest Heated Blanket controllers with labels for features

Image: A detailed view of the two controllers, highlighting features such as the 20 heat setting LED indicator, adjustable auto shut-off timer, and pre-heat button.

Controller Features:

  • 20 Heat Setting LED Indicator: Allows precise temperature control from 85°F to 105°F (temperature range may vary based on ambient room temperature).
  • Adjustable 1-10 Hour Auto Shut-Off Timer: Set the blanket to turn off automatically in 1-hour increments.
  • Pre-Heat Button: Activates a 1-hour pre-heat feature to quickly warm the blanket before use.
  • Heavy Duty Insulated Cord: Ensures durability and safety.
  • 2 Prong Plug: Standard US & Canada compatible plug.
  • Power: 110V-120V @60 Hz (Max 160W).
  • Controller Cord Length: 12'6"
  • Power Cord Length: 6'

Using the Blanket:

  1. Turning On: Press the power button on the controller. The LED indicator will light up.

  2. Adjusting Heat: Use the '+' and '-' buttons to select your desired heat setting from 1 to 20. Start with a lower setting and adjust as needed.

  3. Using Pre-Heat: Press the 'Pre-Heat' button to activate a rapid warming cycle for 1 hour. After 1 hour, the blanket will revert to your last selected heat setting.

  4. Setting Auto Shut-Off: Use the timer button to cycle through the auto shut-off options (1-10 hours). The selected time will be displayed on the LED indicator.

  5. Turning Off: Press the power button again to turn off the blanket. Always unplug the blanket from the wall outlet when not in use for extended periods.

Care and Maintenance

Proper care will extend the life of your Beautyrest Heated Electric Blanket. Always disconnect the power cord from the wall outlet and detach the controller(s) from the blanket before cleaning.

Washing and Drying instructions for heated blanket

Image: Visual guide illustrating the steps for washing and drying the heated blanket, emphasizing machine wash, cold water, minimal detergent, and specific drying methods.

Washing Instructions:

  1. Pre-Soak (Optional): For best results, pre-soak the blanket for 5 minutes in cold water with minimal detergent.

  2. Machine Wash: Wash by hand or use a delicate cycle in a washing machine with cold water and minimal detergent. Do not bleach.

  3. Rinse: Rinse thoroughly in cold water.

  4. Spin Cycle: Remove immediately after the spin cycle to prevent creasing.

Drying Instructions:

  1. Tumble Dry: Tumble dry on medium or low heat for 5 minutes. Do not use high heat.

  2. Air Dry: Gently stretch the blanket to its original shape and hang to finish drying. Do not hang with clothespins, as this may damage the internal wires.

  3. Do Not Iron: Never iron the heated blanket.

Troubleshooting

ProblemPossible CauseSolution
Blanket not heating.
  • Power cord not securely plugged in.
  • Controller not properly connected to blanket.
  • Auto shut-off activated.
  • Controller error code (e.g., E2).
  • Ensure all connections are firm.
  • Unplug and re-plug the blanket from the wall outlet and controller from the blanket.
  • Check the timer setting on the controller.
  • If an error code appears, unplug the unit for 10 minutes, then plug back in. If the error persists, contact customer support.
Blanket feels too warm/cold.
  • Heat setting is too high/low.
  • Ambient room temperature.
  • Adjust the heat setting using the '+' or '-' buttons.
  • Note that the blanket's temperature output is relative to the room temperature.
Controller display is off.
  • Blanket is off or unplugged.
  • Power outage.
  • Press the power button.
  • Check the wall outlet for power.

Specifications

Model NameHeated Plush
Model NumberBR54-0909
SizeQueen (90 in x 84 in)
Material100% Microlight Plush Polyester
ColorBlack
Power Input110V-120V ~ 60Hz, Max 160W
Heat Settings20 levels (85°F - 105°F)
Auto Shut-Off1-10 hours adjustable
Safety CertificationUL Certified, Virtually Zero EMF
Included Components1 Heated Blanket, 2 Digital Controllers
Item Weight8.58 pounds
Diagram showing Queen size blanket dimensions: 90 inches length by 84 inches width

Image: An illustration detailing the dimensions of the Queen size heated blanket, measuring 90 inches in length and 84 inches in width.

Warranty and Support

The Beautyrest Heated Electric Blanket is backed by a 5-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact JLA Home Inc., the manufacturer.

  • Manufacturer: JLA Home Inc.
  • Refer to your product packaging or the official Beautyrest website for the most current contact information.

Please retain your proof of purchase for warranty purposes.

© 2025 Beautyrest. All rights reserved.

This manual is for informational purposes only. Product specifications are subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.