1. Introduction
Thank you for purchasing the Passion-Electro Replacement Remote Control. This remote is specifically designed to function with AIWA TV-1402KE televisions, providing full access to all original remote functions without the need for complex programming. Simply insert the batteries, and it's ready for use.

Figure 1: Front view of the remote control, showing the full button layout including power, mute, channel, volume, navigation, and numeric keys.
2. Setup
2.1 Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards or outwards to open it.
- Insert two (2) AAA 1.5V batteries (not included), ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery cover by sliding it back into position until it clicks securely.

Figure 2: Back view of the remote control, illustrating the location of the battery compartment.
2.2 Initial Use
This remote control requires no programming. Once batteries are correctly installed, it is ready for immediate use with compatible AIWA TV-1402KE televisions.
3. Operating Instructions
The remote control provides access to all standard television functions. Point the remote directly at your television's infrared receiver for optimal performance.
3.1 Basic Functions
- Power (Red Button): Turns the TV on or off.
- Mute: Mutes or unmutes the TV sound.
- Volume Up/Down (VOL +/-): Adjusts the sound volume.
- Channel Up/Down (CH +/-): Changes the TV channel.
- Numeric Buttons (0-9): Directly input channel numbers.
3.2 Navigation and Menu Functions
- Menu: Opens the TV's main menu.
- Navigation Arrows (Up, Down, Left, Right): Navigate through menu options.
- OK: Confirms a selection in the menu.
- Exit: Exits the current menu or screen.
- Back: Returns to the previous screen or menu.
3.3 Input and Special Functions
- Source: Cycles through available input sources (e.g., HDMI, AV).
- TV/SAT/DVD/AUX: Selects specific input modes if supported by your TV.
- Info: Displays information about the current program or input.
- EPG (Electronic Program Guide): Accesses the program guide.
- Smart/NETTV/YouTube/Netflix: Direct access buttons for smart TV features and streaming services, if your TV supports them.

Figure 3: Detailed view of the remote control's button layout, showing the arrangement of function keys.
4. Maintenance
4.1 Battery Replacement
Replace batteries when the remote's response becomes sluggish or it stops functioning. Always replace both batteries simultaneously with new AAA 1.5V batteries. Do not mix old and new batteries or different battery types.
4.2 Cleaning
To clean the remote control, wipe it with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface or internal components.
4.3 Storage
Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. If the remote will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
5. Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new ones.
- Ensure there are no obstructions between the remote and the TV's infrared sensor.
- Make sure you are within the effective operating range (up to 10 meters).
- Some buttons not working:
- This remote is designed for AIWA TV-1402KE. Ensure your TV model is compatible.
- Some advanced functions may require specific TV firmware or settings.
- Clean the remote's surface to ensure no debris is obstructing button presses.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Passion-Electro |
| Color | Black |
| Compatible Devices | Television (AIWA TV-1402KE) |
| Batteries Required | 2 x AAA 1.5V (not included) |
| Maximum Range | 10 Meters |
| Manufacturer | Passion-Electro |
| Country of Origin | China |
7. Warranty and Support
7.1 Warranty Information
Specific warranty details for this product are not provided in this manual. Please refer to your purchase documentation or contact the retailer for information regarding warranty coverage and terms.
7.2 Customer Support
For further assistance or inquiries regarding your Passion-Electro Replacement Remote Control, please contact the manufacturer or your point of purchase. Ensure you have your product model number (AIWA TV-1402KE Compatible) and purchase details ready when contacting support.