Becker R8-17-C01 Roller Shutter Actuator with Integrated Radio Receiver

1. Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Becker R8-17-C01 Roller Shutter Actuator. This electric tubular motor with an integrated radio receiver is designed for automated control of roller shutters and mosquito nets. Please read these instructions carefully before installation and keep them for future reference.

Image 1: Becker Quality Logo. This image displays the "Quality made in Germany" logo with the Becker brand name, signifying the product's origin and quality standards.

2. Safety Instructions

• Qualified Personnel: Installation and electrical connections must only be performed by qualified electricians in accordance with local regulations and standards.
• Power Disconnection: Always disconnect the power supply before performing any installation, maintenance, or repair work.
• Intended Use: This motor is designed exclusively for driving roller shutters and mosquito nets. Any other use is considered improper.
• Obstacles: Ensure that there are no obstacles in the path of the roller shutter during operation. The motor features sensitive obstacle detection, but caution is always advised.
• Children and Pets: Keep children and pets away from the operating area of the roller shutter. Remote controls should be stored out of their reach.
• Damage: Do not operate the motor if it is damaged. Contact customer support for assistance.
• Environmental Conditions: Ensure the motor is protected from moisture and extreme temperatures unless specifically rated for such conditions.

3. Product Overview and Features

The Becker R8-17-C01 is a high-quality tubular motor designed for seamless integration into modern smart homes. Its key features include:

• Integrated Radio Receiver: Compatible with the Becker Centronic control program for convenient wireless operation.
• Automatic End Position Detection: Automatically detects and sets end positions when used with flexible suspension springs or rigid shaft connectors, simplifying installation.
• Sensitive Obstacle Detection: Detects obstacles in the AB direction and automatically reverses to prevent damage to the shutter or motor.
• Blockage Detection: Enhances safety by detecting blockages during operation.
• Frost Protection: Prevents damage by detecting frost and stopping movement at the top and bottom positions.
• Rollable Motor Head: Designed for easy installation and adjustment.
• Dynamic Torque Adjustment: Ensures smooth and consistent operation.
• Soft Stop at Top: Provides a gentle and quiet stop when the shutter reaches its upper limit.
• Simple Programming: User-friendly setup process.
• Individual and Centralized Control: Supports control of individual shutters or groups of shutters.

Image 2: Becker R8-17-C01 Tubular Motor. This image shows the main body of the Becker R8-17-C01 tubular motor, typically installed inside a roller shutter shaft.

4. Package Contents

Please check the package for the following items:

• 1x Becker R8-17-C01 Roller Shutter Actuator with Integrated Radio Receiver
• 1x Motor Cable (specified length, e.g., 10m)
• 1x User Manual (Original German manual; refer to this translated version for English)

Image 3: Becker Motor Cable. This image displays the motor cable, typically used to connect the tubular motor to the power supply. The cable shown is white, coiled, and has exposed wires at one end.

5. Setup and Installation

Important: Installation must be carried out by a qualified electrician. Ensure power is disconnected before starting.

1. Prepare the Roller Shutter Shaft: Ensure the roller shutter shaft has a diameter of 50 mm, as required by the motor.
2. Insert the Motor: Carefully slide the tubular motor into the roller shutter shaft. Ensure it is securely seated and aligned.
3. Mount the Shaft: Install the roller shutter shaft with the integrated motor into the roller shutter box according to the roller shutter system manufacturer's instructions.
4. Connect Roller Shutter to Shaft: Attach the roller shutter curtain to the shaft using appropriate suspension springs or rigid shaft connectors. These components are crucial for the motor's automatic end position detection.
5. Electrical Connection: Connect the motor cable to the main power supply. Follow the wiring diagram provided with the motor and adhere to all local electrical codes. Ensure proper grounding.
6. Power On: Once all connections are secure and verified, restore power to the system.
7. Initial Programming (End Positions):
   • The motor is designed for simple programming. For systems with flexible suspension springs or rigid shaft connectors, the motor will automatically detect the upper and lower end positions during the first few cycles.
   • For manual adjustment or fine-tuning, refer to the detailed programming instructions in the original German manual or Becker's official support documentation. This typically involves using a compatible Centronic control unit.
8. Pairing with Remote Control: If using a separate radio remote control, follow the pairing instructions provided with your Centronic control unit to link it with the integrated radio receiver of the motor.

6. Operating Instructions

The Becker R8-17-C01 motor is operated via a compatible Becker Centronic radio control unit (e.g., wall switch, handheld remote, or smart home system).

• Opening the Shutter: Press the "UP" button on your control unit. The shutter will move upwards until it reaches the programmed upper end position or until you press the "STOP" button.
• Closing the Shutter: Press the "DOWN" button on your control unit. The shutter will move downwards until it reaches the programmed lower end position or until you press the "STOP" button.
• Stopping the Shutter: Press the "STOP" button at any point during movement to halt the shutter.
• Intermediate Positions: Some Centronic control units allow for programming and recalling intermediate positions. Refer to your control unit's manual for specific instructions.
• Automatic Functions: If integrated into a smart home system or using a programmable Centronic timer, the shutter can operate automatically based on schedules or sensor inputs.

Obstacle Detection: If an obstacle is detected during closing, the motor will automatically reverse direction to prevent damage.

Frost Protection: In freezing conditions, the motor's frost protection feature will prevent operation if the shutter is frozen to the window sill, protecting the motor and shutter from damage.

7. Maintenance

The Becker R8-17-C01 motor is largely maintenance-free. However, regular checks can ensure its longevity and optimal performance.

• Annual Inspection: Annually inspect the roller shutter system for any signs of wear, damage, or loose components. Check the roller shutter curtain, guides, and suspension elements.
• Cleaning: Keep the roller shutter guides clean and free from debris to ensure smooth operation. Do not use harsh chemicals or abrasive materials.
• Cable Check: Periodically check the motor cable for any signs of damage, fraying, or insulation degradation. If damage is found, disconnect power immediately and have it replaced by a qualified electrician.
• Lubrication: The motor itself does not require lubrication. Do not attempt to lubricate internal components.
• Professional Service: For any internal motor issues or complex repairs, contact a qualified service technician or Becker customer support. Do not attempt to open the motor housing.

8. Troubleshooting

If you encounter issues with your Becker R8-17-C01, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Becker customer support or a qualified service technician.

9. Specifications

10. Warranty and Support

For warranty information, please refer to the documentation provided with your purchase or contact Becker Antriebe GmbH directly.

For technical support, spare parts, or service inquiries, please contact your authorized Becker dealer or visit the official Becker Antriebe GmbH website.

Spare parts availability information is not available through this product listing.