Passion-Electro NSX-V900

Download PDF
Contents

Replacement Remote Control User Manual

For AIWA NSX-V900 HI-FI Systems

1. Introduction

This manual provides instructions for the use and maintenance of your new Passion-Electro Replacement Remote Control, specifically designed for AIWA NSX-V900 HI-FI systems.

This specialized remote control is engineered to provide access to all functions of your original AIWA NSX-V900 remote. No complex programming or setup is required. Simply insert the batteries, and the remote is ready for immediate use.

Front view of the Passion-Electro Replacement Remote Control for AIWA NSX-V900.

Figure 1: Front view of the Passion-Electro Replacement Remote Control. This image shows the full layout of buttons, including power, mute, input selection, number pad, navigation, and media controls.

2. Setup

2.1 Battery Installation

Your remote control requires two (2) AAA 1.5V batteries (LR03-AAA). Batteries are not included with the remote control.

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery compartment cover downwards or press the latch to open it.
  3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Replace the battery compartment cover by sliding it back into place until it clicks securely.

Once batteries are installed, the remote control is ready for use with your AIWA NSX-V900 HI-FI system. No programming is required.

Back view of the remote control showing the battery compartment.

Figure 2: Back view of the remote control, highlighting the battery compartment cover. This is where the batteries are inserted.

3. Operating Instructions

This remote control is designed to replicate the functionality of your original AIWA NSX-V900 remote. The button layout is intuitive and similar to standard HI-FI remote controls.

3.1 Basic Functions

  • Power Button: Located at the top, typically red. Press to turn the HI-FI system on or off.
  • Mute Button: Temporarily silences the audio output. Press again to restore sound.
  • Volume Control: Use the V+ and V- buttons to increase or decrease the volume.
  • Channel/Track Navigation: Use the P+ and P- buttons to navigate through radio presets or tracks on a CD/DVD.
  • Input Selection: Buttons like TV, SAT, DVD, AUX allow you to switch between different audio/video sources connected to your HI-FI system.
  • Number Pad: Use the numeric buttons (0-9) to directly select channels, tracks, or input numerical values.
  • Navigation Pad (Arrow Keys & OK): Used for navigating menus and confirming selections.
  • Menu/Exit: Access system menus or exit current menu screens.

3.2 Advanced Functions

Depending on your specific AIWA NSX-V900 model, additional buttons may provide functions such as:

  • Playback Controls: Play, Pause, Stop, Fast Forward, Rewind, Skip Track.
  • Sound Modes: Equalizer presets, bass boost, surround sound.
  • Timer/Sleep: Set a timer for the system to turn off automatically.
  • Display: Adjust display settings or view information.

Refer to your original AIWA NSX-V900 HI-FI system's user manual for detailed explanations of specific functions and their corresponding buttons.

4. Maintenance

4.1 Cleaning

To maintain the remote control's appearance and functionality:

  • Wipe the surface with a soft, dry cloth.
  • For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not spray cleaner directly onto the remote.
  • Avoid using harsh chemicals, solvents, or abrasive cleaning pads, as these can damage the remote's finish or internal components.

4.2 Battery Replacement

Replace batteries when the remote control's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type (AAA 1.5V). Do not mix old and new batteries, or different types of batteries.

If the remote control will not be used for an extended period (e.g., one month or more), remove the batteries to prevent leakage and potential damage to the remote.

5. Troubleshooting

  • Remote not responding:
    • Ensure batteries are inserted correctly with the correct polarity (+/-).
    • Replace old batteries with new ones.
    • Check for any obstructions between the remote control and the HI-FI system's infrared receiver.
    • Ensure you are within the effective range and line of sight of the HI-FI system.
  • Some buttons not working:
    • This remote is designed for the AIWA NSX-V900. Verify that the function you are trying to use is supported by your specific HI-FI system model.
    • Clean the remote control, especially around the non-working buttons, to remove any dirt or debris that might be obstructing the button mechanism.
  • Interference:
    • Strong light sources (e.g., direct sunlight, fluorescent lights) can sometimes interfere with infrared signals. Try operating the remote in a different lighting condition.

If issues persist after following these steps, contact the product manufacturer or retailer for further assistance.

6. Specifications

FeatureDetail
Product TypeReplacement Remote Control
BrandPassion-Electro
Compatible ModelAIWA NSX-V900 HI-FI Systems
Connectivity TechnologyInfrared (IR)
Controller TypeButton Control
Batteries Required2 x AAA (LR03-AAA) 1.5V (Not Included)
Item Weight100 g
Special FeaturesNo programming required, direct use

© 2023 Passion-Electro. All rights reserved.

For support, please refer to the contact information provided by your retailer.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.