Passion-Electro AIWA JAX-N3

Download PDF
Contents

User Manual

Replacement Remote Control for AIWA JAX-N3 HI-FI

1. Introduction

This manual provides essential information for the proper use and maintenance of your new Passion-Electro replacement remote control for AIWA JAX-N3 HI-FI systems. Please read this manual carefully before use to ensure optimal performance and longevity of the product.

2. Product Overview

The Passion-Electro replacement remote control is specifically designed to function with AIWA JAX-N3 HI-FI systems, offering full access to all original remote control functions without the need for any programming. It is a specialized remote, not a generic universal remote.

  • No Programming Required: Ready to use after battery insertion.
  • Full Functionality: Accesses all functions of the original AIWA JAX-N3 remote.
  • LED Indicator: Features an LED indicator for operational feedback.
  • High Quality: Constructed for superior quality and durability.
Front view of the Passion-Electro replacement remote control

Figure 2.1: Front view of the replacement remote control, showing all buttons and the Passion-Electro logo.

Angled view of the Passion-Electro replacement remote control

Figure 2.2: Angled view of the remote control, highlighting its ergonomic design.

3. Setup

Follow these simple steps to prepare your remote control for use:

  1. Open Battery Compartment: Locate the battery compartment on the back of the remote control. Slide the cover downwards or press the latch to open it.
  2. Back view of the remote control showing the battery compartment

    Figure 3.1: Back view of the remote control with the battery compartment visible.

  3. Insert Batteries: Insert two (2) AAA 1.5V batteries (not supplied) into the compartment, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Close Battery Compartment: Slide the battery cover back into place until it clicks securely.
  5. Test: Point the remote control towards your AIWA JAX-N3 HI-FI system and press any button (e.g., Power) to confirm functionality.

Note: Always use new batteries of the specified type. Do not mix old and new batteries, or different types of batteries.

4. Operating Instructions

This remote control is designed to replicate the functions of your original AIWA JAX-N3 HI-FI remote. Simply point the remote control at your HI-FI system and press the desired button.

  • Power Button: Turns the HI-FI system on or off.
  • Volume Control: Use the 'VOL+' and 'VOL-' buttons to adjust the volume.
  • Channel/Track Navigation: Use the arrow keys or dedicated track buttons to navigate through channels, tracks, or menu options.
  • Input Selection: Use buttons like 'TV', 'SAT', 'DVD', 'AUX' to select different audio/video inputs on your system.
  • Numeric Keypad: Use the number buttons for direct input or channel selection.
  • Menu/Setup: Access system menus and settings using the 'MENU' or 'SETUP' buttons.
  • Mute: Temporarily silences the audio output.

Important: The exact layout and function of buttons may vary slightly from the image provided, depending on the specific model of the original remote it replaces. Refer to your AIWA JAX-N3 HI-FI system's original manual for detailed function descriptions of each button.

5. Maintenance

To ensure the longevity and proper functioning of your remote control, follow these maintenance guidelines:

  • Cleaning: Wipe the remote control with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution, then wipe dry immediately. Do not use abrasive cleaners or solvents.
  • Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries simultaneously.
  • Storage: Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Drops: Protect the remote from physical shocks and drops, as this can damage internal components.
  • Liquid Exposure: Keep the remote control away from liquids to prevent damage.

6. Troubleshooting

If you experience issues with your remote control, try the following troubleshooting steps:

  • Remote Not Responding:
    1. Check if the batteries are inserted correctly with the correct polarity (+/-).
    2. Replace the batteries with new ones.
    3. Ensure there are no obstructions between the remote control and the HI-FI system's infrared receiver.
    4. Make sure you are within the operational range (up to 10 meters) and pointing the remote directly at the HI-FI system.
  • Specific Buttons Not Working:
    1. Clean the remote control, especially around the non-functioning buttons, to remove any dirt or debris that might be preventing contact.
    2. If only a few buttons are not working after trying new batteries, the remote might be damaged.
  • Interference:

    Strong light sources (like direct sunlight or certain fluorescent lights) can sometimes interfere with infrared signals. Try operating the remote in a different lighting condition.

If the problem persists after trying these steps, please contact your retailer for further assistance.

7. Specifications

FeatureDetail
BrandPassion-Electro
ColorBlack
Connectivity TechnologyInfrared
Special FeatureNo programming required
Controller TypeButton Control
Maximum Range10 Meters
Battery Type2 x AAA 1.5V (LR03-AAA) batteries (not supplied)
Country of OriginChina

8. Warranty and Support

This product is a new item. While specific warranty details are not provided, standard consumer rights apply. The product is typically dispatched within 48 hours.

For returns, a 30-day return policy is generally available from the date of purchase. Please refer to your purchase documentation or contact your retailer for specific return procedures and any available support.

© 2025 Passion-Electro. All rights reserved.

Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.