Introduction
This manual provides instructions for the installation, operation, and maintenance of your Globe Electric Wireless Battery Operated Doorbell Kit, model SL-7306-03. Please read these instructions carefully before use and retain them for future reference.
The kit includes one wireless chime unit and one wireless push button. The chime offers three selectable tunes and operates wirelessly for convenient placement.
Package Contents
- 1 x Wireless Chime Unit
- 1 x Wireless Push Button
- Mounting Screws
- Mounting Tape
- Anchors
Setup
1. Battery Installation
For the Chime Unit:
- Locate the battery compartment on the back of the chime unit.
- Open the compartment cover.
- Insert two (2) "AA" batteries (not included), ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
For the Push Button:
- Gently pry open the push button casing to access the battery compartment.
- Insert the required battery (check compartment for type), ensuring correct polarity (+/-).
- Close the push button casing securely.
2. Mounting the Chime Unit
The chime unit can be placed on any flat surface or mounted to a wall.
- For Wall Mounting: Use the provided mounting screws and anchors. Mark the desired location, drill pilot holes, insert anchors, and secure the chime unit with screws.
- For Portable Use: Simply place the chime unit in a central location within the transmission range.
3. Mounting the Push Button
Choose a suitable location near your entrance, ensuring it is easily accessible to visitors and protected from direct heavy rain if possible.
- Using Mounting Tape: Clean the mounting surface thoroughly. Apply the provided mounting tape to the back of the push button and firmly press it onto the desired location for at least 30 seconds.
- Using Screws: Mark the desired location. Drill pilot holes if necessary and secure the push button with the provided screws.
Image: The Globe Electric Wireless Battery Operated Doorbell Kit showing the chime unit and push button.
Operating Instructions
1. Selecting a Chime Tune
The chime unit offers three selectable tunes. To change the tune:
- Locate the tune selection button on the chime unit (often a small button on the side or back).
- Press the button repeatedly to cycle through the available tunes.
- Stop pressing when you hear your preferred tune.
The chime unit is designed to play a specific tune for the front entrance and a distinct "ding" for a back entrance if a second push button is paired (additional push buttons sold separately).
2. Testing the Doorbell
After installation, press the push button firmly. The chime unit should sound the selected tune. If it does not, refer to the Troubleshooting section.
The system has a transmission range of up to 150 feet (approximately 45 meters) in open areas. Environmental factors and obstacles may reduce this range.
Maintenance
- Battery Replacement: Replace batteries in both the chime unit and push button when the sound becomes faint or the unit stops functioning. Always use fresh batteries of the specified type.
- Cleaning: Wipe the units with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Environmental Protection: While the push button is designed for outdoor use, protecting it from extreme weather conditions (e.g., heavy rain, direct sunlight, extreme cold) can extend its lifespan.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Doorbell does not ring. |
|
|
| Chime sounds weak or distorted. | Low batteries in the chime unit. | Replace the "AA" batteries in the chime unit. |
| Push button LED does not light up. | Dead or low battery in the push button. | Replace the battery in the push button. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | SL-7306-03 |
| Brand | Globe Electric |
| Manufacturer | Heath Zenith |
| Color | White |
| Material | Plastic |
| Product Dimensions (Chime) | 3.5"L x 2.5"W x 1.5"H |
| Item Weight | 5.3 ounces (approx. 0.33 lbs) |
| Transmission Range | Up to 150 ft (45 meters) |
| Chime Batteries | 2 x "AA" (not included) |
| Push Button Battery | Type varies, check compartment |
| Selectable Tunes | 3 |
| UPC | 016963373068 |
Warranty and Support
This product comes with a 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims or technical support, please contact Globe Electric customer service. Please have your model number (SL-7306-03) and proof of purchase available.
Note: The warranty does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.
