Introduction
This manual provides instructions for the setup, operation, and maintenance of your Fresh 'n Rebel Clam Wireless Bluetooth Over-Ear Headphones. Please read this manual carefully before using your headphones to ensure proper function and longevity.
Package Contents
- 1x Fresh 'n Rebel Clam Wireless Over-Ear Headphones
- 1x Fabric Pouch
- 1x Micro USB Charging Cable
- 1x 3.5mm AUX Back-up Cable
- 1x User Manual
The image displays the Fresh 'n Rebel Clam headphones, a fabric carrying pouch, a Micro USB charging cable, and a 3.5mm audio cable, all included in the product packaging.
Product Overview
The Fresh 'n Rebel Clam headphones feature an over-ear design with soft protein leather ear cushions for comfort. They are equipped with a built-in microphone and a 3-button remote for control. The headphones are foldable and rotatable for easy storage and wear.
A front-angle view of the Fresh 'n Rebel Clam wireless over-ear headphones in Storm Grey, highlighting the earcups and headband.
Setup
Charging the Headphones
Before first use, fully charge your headphones.
- Connect the Micro USB charging cable to the charging port on the headphone.
- Connect the other end of the cable to a USB power source (e.g., computer USB port, USB wall adapter).
- The LED indicator will show charging status. A full charge takes approximately 3 hours.
- Once fully charged, disconnect the charging cable.
Powering On and Off
- To power on, press and hold the power button until the LED indicator lights up.
- To power off, press and hold the power button until the LED indicator turns off.
Bluetooth Pairing
To connect your headphones wirelessly to a device:
- Ensure the headphones are powered off.
- Press and hold the power button for approximately 5 seconds until the LED indicator flashes rapidly, indicating pairing mode.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "Fresh 'n Rebel Clam" from the list of devices.
- Once paired, the LED indicator will show a steady light or slow flash.
An image illustrating the quick Bluetooth pairing feature and compatibility with both iOS and Android operating systems for a wireless listening experience.
Wired Connection
To use the headphones with a wired connection:
- Connect one end of the 3.5mm AUX back-up cable to the audio input port on the headphone.
- Connect the other end of the cable to the 3.5mm audio output jack on your device.
- The headphones will operate in passive mode, consuming no battery power.
Operating
Basic Controls
The headphones feature a 3-button remote for controlling audio playback and calls.
- Play/Pause: Press the center button once.
- Next Track: Press the "+" button once.
- Previous Track: Press the "-" button once.
- Volume Up: Press and hold the "+" button.
- Volume Down: Press and hold the "-" button.
- Answer/End Call: Press the center button once during an incoming call.
- Reject Call: Press and hold the center button during an incoming call.
Folding and Rotating Design
The earcups of the Clam headphones can be rotated and folded for compact storage and comfortable wear around the neck.
An image showing the Fresh 'n Rebel Clam headphones being worn around the neck, illustrating their rotatable earcups and foldable design for portability.
A view of the Fresh 'n Rebel Clam headphones in their folded position, demonstrating their compact design for easy storage.
Maintenance
Cleaning
Use a soft, dry cloth to clean the headphones. Avoid using abrasive cleaners or solvents.
Storage
When not in use, store the headphones in the provided fabric pouch to protect them from dust and scratches. Avoid storing in extreme temperatures or high humidity.
Troubleshooting
No Power
- Ensure the headphones are fully charged. Connect to a power source using the Micro USB cable.
Cannot Pair via Bluetooth
- Ensure the headphones are in pairing mode (rapidly flashing LED).
- Make sure Bluetooth is enabled on your device.
- Move the headphones closer to your device.
- Turn off and on both the headphones and your device, then try pairing again.
- Clear previous Bluetooth connections on your device if necessary.
No Sound
- Check the volume level on both the headphones and your connected device.
- Ensure the headphones are properly paired via Bluetooth or the 3.5mm AUX cable is securely connected.
- If using Bluetooth, check if the device's audio output is set to the headphones.
Poor Sound Quality
- Ensure there are no obstructions between the headphones and your Bluetooth device.
- Move closer to your Bluetooth device to avoid interference.
- Try playing audio from a different source or device to rule out source issues.
Specifications
| Feature | Specification |
|---|---|
| Model Name | Clam |
| Model Number | 3HP300SG |
| Connectivity | Wireless (Bluetooth), Wired (3.5mm AUX) |
| Wireless Communication | Bluetooth |
| Battery Life | Up to 35 hours |
| Charging Time | Approximately 3 hours |
| Ear Placement | Over-Ear |
| Material | Protein Leather (ear cushions) |
| Weight | 260 g |
| Dimensions (LxWxH) | 16 x 7.2 x 17.8 cm |
| Special Features | Foldable, Rotatable Earcups, Built-in Microphone |
Warranty and Support
For warranty information or technical support, please refer to the Fresh 'n Rebel official website or contact their customer service. Keep your proof of purchase for warranty claims.
