1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the L-faster S886 LCD Thumb Throttle and Brushless Motor Controller. This system is designed for 250W to 350W brushless electric bikes or electric scooters, specifically the 24V version with EBS (Electronic Braking System).
Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Package Contents
The package for the 24V version with EBS includes the following components:
- 1x 350W Brushless Controller
- 1x S886 LCD Display Thumb Throttle
- 1x EBS Brake Thumb Throttle
Figure 2.1: Overview of the L-faster S886 LCD Thumb Throttle, Brushless Controller, and EBS Brake Thumb Throttle components.
Figure 2.2: The brushless controller and S886 LCD display thumb throttle with their associated wiring harnesses.
3. Specifications
Controller Specifications:
- Rated Voltage: 24V / 36V / 48V (This specific model is 24V)
- Rated Power: 250W ~ 350W
- Max Current: 10A ~ 20A
- Lowest Voltage Protection: 20V / 31V / 42V (Corresponds to 24V/36V/48V systems)
- Compatibility: Suitable for 250W ~ 350W brushless motors (includes hall sensor)
S886 LCD Display Thumb Throttle Functions:
- Battery Indicator
- Speed Level (PAS)
- Vehicle Speed Indicator
- Single Trip Mileage
- Total Trip Mileage
- Battery Current Voltage
Figure 3.1: Detailed dimensions of the S886 LCD Thumb Throttle for installation reference.
4. Setup and Installation
Installation of the controller and throttle system requires basic electrical knowledge and careful attention to wiring. Ensure the power source is disconnected before beginning installation.
- Mount the S886 LCD Thumb Throttle: Attach the S886 LCD display thumb throttle to your scooter or bicycle handlebar. Refer to Figure 4.1 for placement examples. Ensure it is securely fastened and comfortable for operation.
- Mount the EBS Brake Thumb Throttle: If your package includes the EBS brake thumb throttle, mount it on the opposite side of the handlebar or in a suitable position.
- Connect the Controller: The brushless controller has multiple wiring harnesses. Connect them according to your motor, battery, and other accessories.
- Connect the motor phase wires (usually three thicker wires).
- Connect the motor Hall sensor wires (usually five thinner wires).
- Connect the battery power wires (red for positive, black for negative).
- Connect the S886 LCD display thumb throttle wire harness.
- Connect the EBS brake thumb throttle wire harness.
- Connect any other accessories such as lights or pedal assist sensors (PAS) if applicable.
- Secure Wiring: Route and secure all wiring to prevent interference with moving parts and protect against damage.
Figure 4.1: Reference images showing the S886 LCD Thumb Throttle installed on a scooter handlebar (top) and a bicycle handlebar (bottom).
5. Operating Instructions
The S886 LCD display provides essential information and control over your electric vehicle. Familiarize yourself with its functions before riding.
5.1 Power On/Off
- To power on the display, press and hold the power button (usually the middle button).
- To power off, press and hold the power button again.
5.2 Display Functions
The LCD screen displays various parameters:
Figure 5.1: Examples of the S886 LCD display showing different operational states and data, including vehicle speed, battery level, speed level, and mileage.
- Vehicle Speed: Displays current speed in km/h or mph.
- Battery Indicator: Shows the remaining battery charge (e.g., 2 lattices, 4 lattices).
- Speed Level: Indicates the current power assist level (e.g., Speed Level 1, 2).
- Mileage: Displays single trip mileage (TRIP) and total trip mileage (ODO).
- Battery Voltage: Shows the current battery voltage (VOL).
- Error Codes: Displays error codes (ERR) if any issues are detected.
5.3 Throttle Operation
- To accelerate, gently press the thumb throttle. The speed will increase proportionally to the throttle input.
- Release the throttle to decelerate.
5.4 EBS Brake Operation (if applicable)
- If your system includes the EBS brake thumb throttle, pressing it will engage the electronic braking system, providing regenerative braking.
5.5 Video Demonstration
Video 5.1: This video demonstrates the operation of the S886 LCD display thumb throttle, showing how to power it on, navigate through display modes, and observe speed changes. The video highlights the various data points available on the screen, such as speed, battery level, and mileage.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your controller and throttle system.
- Cleaning: Keep the display and controller free from dust and dirt. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive materials.
- Wiring Inspection: Periodically check all wiring connections for tightness and signs of wear or damage. Ensure no wires are pinched or exposed.
- Moisture Protection: While the components are designed for outdoor use, avoid prolonged exposure to heavy rain or submersion in water.
- Storage: When not in use for extended periods, store the electric vehicle in a dry, temperate environment.
7. Troubleshooting
If you encounter issues, refer to the following basic troubleshooting steps:
- No Power to Display:
- Check battery connection and ensure the battery is charged.
- Verify all power cables to the controller are securely connected.
- Motor Not Responding:
- Ensure the throttle is properly connected to the controller.
- Check motor phase wires and Hall sensor wires for secure connections.
- Look for any error codes (ERR) on the S886 display and consult the controller's specific error code guide if available.
- Inconsistent Speed/Power:
- Check for loose connections in the throttle or motor wiring.
- Ensure the battery voltage is within the operating range.
For persistent issues, contact customer support.
8. Warranty
This product comes with a Limited Warranty. Please refer to the warranty card included with your purchase or contact customer support for specific terms and conditions regarding coverage and duration.
9. Customer Support
If you have any questions, require technical assistance, or need to report an issue, please contact L-faster customer support through the retailer where the product was purchased or visit the official L-faster website for contact information.
