Artemide 784862011113
Contents
Artemide Tizio Table Lamp User Manual
Model: Classic Incandescent (Part No. 784862011113)
1. Introduction
The Artemide Tizio Table Lamp, designed by Richard Sapper, is an iconic lighting fixture renowned for its innovative design and functional flexibility. This classic incandescent model provides focused task lighting through a sophisticated system of counterweights and adjustable arms, allowing for precise light positioning. Its elegant black finish and robust construction make it a timeless addition to any workspace or living area.
This manual provides comprehensive instructions for the safe and efficient setup, operation, and maintenance of your Artemide Tizio Table Lamp. Please read all instructions carefully before use.

Figure 1: The Artemide Tizio Table Lamp, demonstrating its adjustable design and sleek black finish.
2. Setup and Installation
Follow these steps to set up your Artemide Tizio Table Lamp:
- Unboxing: Carefully remove all components from the packaging. Inspect for any signs of damage. Retain packaging for future transport or storage.
- Placement: Choose a stable, flat, and level surface for the lamp. Ensure there is sufficient space for the lamp's arms to extend and adjust freely without obstruction.
- Assembly (if required): The Tizio lamp's unique design involves a balanced arm system. While largely pre-assembled, ensure all pivot points and connections are secure. The base is designed to rotate 360 degrees.
- Power Connection: Insert the power plug into a standard, grounded electrical outlet (120V AC, 60Hz). The lamp incorporates an integral low voltage transformer within its base.

Figure 2: The Tizio lamp positioned on a surface, illustrating its potential for compact arrangement.
3. Operating Instructions
The Artemide Tizio lamp offers intuitive control and precise adjustability:
- Power On/Off and Intensity Control: Locate the 2-intensity on/off switch on the lamp's base. Press the switch once for the first intensity setting, press again for the second (brighter) intensity, and a third time to turn the lamp off.
- Adjusting the Arms: The lamp features fully adjustable, balanced electrical conductor arms. Gently grasp the lamp head or the arms and move them to your desired position. The counterweight system will maintain the lamp's balance and the head's parallel orientation to the table.
- Adjusting the Head: The die-cast aluminum head can be adjusted to direct the light beam precisely where needed.
- Rotating the Base: The lamp's base can rotate 360 degrees, allowing you to pivot the entire lamp without moving its footprint on the surface.

Figure 3: The Tizio lamp in a practical application, highlighting its versatility for task lighting.
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your Tizio lamp:
- Cleaning:
- Always unplug the lamp before cleaning.
- Dust the lamp with a soft, dry, lint-free cloth.
- For more thorough cleaning, use a slightly damp cloth with mild soap, then wipe dry immediately. Avoid abrasive cleaners, solvents, or polishes, as they may damage the finish.
- Clean the protective glass lens regularly to ensure maximum light output.
- Bulb Replacement:
- Bulb Type: The lamp uses one 35W 12V GY6.35 halogen lamp.
- Safety First: Ensure the lamp is unplugged and has cooled down completely before attempting to replace the bulb. Halogen bulbs can become very hot.
- Procedure: Carefully remove the protective glass lens. Gently pull the old bulb straight out from its socket. When inserting the new bulb, avoid touching the glass part with bare hands, as oils can reduce bulb life. Use a clean cloth or tissue. Push the new bulb firmly but gently into the socket. Replace the protective glass lens.
- Arm System: The balanced arm system is designed for smooth operation. Avoid forcing the arms into positions beyond their natural range of motion.

Figure 4: Detailed view of the lamp's adjustable head and arm, illustrating the components for maintenance.
5. Troubleshooting
If you encounter issues with your Artemide Tizio Table Lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power, switch in OFF position, faulty bulb, loose connection. |
|
| Light flickers or is dim. | Loose bulb, incorrect bulb type, power fluctuation, bulb nearing end of life. |
|
| Arms are stiff or difficult to adjust. | Dust or debris in pivot points, mechanical obstruction. |
|
If the problem persists after attempting these solutions, please contact Artemide customer support.
6. Specifications
| Feature | Detail |
|---|---|
| Design | Richard Sapper |
| Model | Tizio Classic Incandescent |
| Part Number | 784862011113 |
| Lamping | 1 x 35W 12V GY6.35 Halogen Lamp (included) |
| Dimensions (Classic) | 30.75"W x 26"H; 46.875" max height; Base: 4.25"D |
| Material | Aluminum, Glass, Steel |
| Finish Type | Polished |
| Color | Black |
| Power Source | Corded Electric |
| Voltage | 12 Volts |
| Switch Type | Push Button (2-intensity) |
| Item Weight | 0.16 ounces (approx. 4.54 grams) |
| Certification | ETL, UL |
| Indoor/Outdoor Usage | Indoor |
7. Warranty and Support
Warranty Information: Specific warranty details for the Artemide Tizio Table Lamp are not provided in this manual. Please refer to the warranty card included with your product or visit the official Artemide website for the most current warranty policy and registration information.
Customer Support: For technical assistance, replacement parts, or further inquiries, please contact Artemide customer support directly. Contact information can typically be found on the manufacturer's official website or on the product packaging.
Online Resources: For additional information, product registration, or to view other Artemide products, please visit the official Artemide website: www.artemide.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.