Introduction
This manual provides essential instructions for the proper installation, use, and maintenance of your Spigen Rugged Armor Pro case and band for Apple Watch. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.
Compatibility
The Spigen Rugged Armor Pro case and band is designed for specific Apple Watch models and sizes. Ensure your device matches the compatible specifications below:
- Compatible Sizes: 45mm and 44mm Apple Watch models.
- Compatible Series: Apple Watch Series SE3, Series 9, Series 8, Series SE2, Series 7, Series 6, Series SE, Series 5, Series 4.
This product is not compatible with 41mm or 40mm Apple Watch models.
Image: Compatibility chart for Spigen Rugged Armor Pro, indicating support for 45mm and 44mm Apple Watch Series SE3/9/8/SE2/7/6/SE/5/4, and non-support for 41mm and 40mm models.
Package Contents
- 1 x Spigen Rugged Armor Pro Apple Watch Case with Integrated Band
Setup and Installation
Follow these steps to properly install your Apple Watch into the Spigen Rugged Armor Pro case and secure it to your wrist.
- Prepare Your Apple Watch: Ensure your Apple Watch is clean and free of any debris or existing screen protectors that might interfere with the case fit.
- Insert the Apple Watch: Gently push your Apple Watch into the case opening. The case is designed for a snug fit, so apply even pressure until the watch is fully seated within the protective frame.
- Secure the Band: Once the watch is in place, wrap the integrated band around your wrist. Insert the pin through one of the adjustment holes and secure it with the metal buckle.
- Adjust for Comfort: Adjust the band to a comfortable and secure fit. The band is designed to fit most wrist sizes from 5.5 inches (140mm) to 8.5 inches (215mm).
- Verify Fit: Ensure the watch is stable and does not move excessively within the case. The secure fit helps maintain protection and proper sensor function.
Image: The unibody design of the Spigen Rugged Armor Pro case, highlighting the opening where the Apple Watch is inserted.
Image: A diagram illustrating the wide range of adjustability for the band, accommodating wrist sizes between 5.5 and 8.5 inches (140mm - 215mm).
Image: A person wearing the Spigen Rugged Armor Pro during a run, illustrating the secure and stable fit provided by the case and band.
Installation Video
Watch the official installation guide for a visual demonstration:
Video: Official Spigen video demonstrating the installation of the Rugged Armor Pro case onto an Apple Watch and securing it on the wrist.
Operation
The Spigen Rugged Armor Pro case is designed to maintain full functionality of your Apple Watch while providing robust protection.
- Digital Crown and Side Button: Precise cutouts ensure effortless access and tactile feedback for the Digital Crown and side button.
- Speakers and Vents: The case features openings that allow for clear audio output and proper ventilation.
- Charging: The case is designed to allow wireless charging without removal. Simply place your Apple Watch with the case onto your magnetic charging puck.
- Display Protection: Raised edges around the bezel provide additional protection for the display against scratches and direct impacts.
Image: A detailed view of the case's side, highlighting the precise cutouts for the Digital Crown and side button, ensuring full functionality.
Image: The back of the Apple Watch within the case, showing the exposed sensor area for health tracking and wireless charging compatibility.
Image: A close-up of the case on a wrist, illustrating the raised edges that protect the Apple Watch display from scratches during daily use.
Maintenance
To keep your Spigen Rugged Armor Pro case and band in optimal condition, follow these maintenance guidelines:
- Cleaning: Wipe the case and band regularly with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used. Ensure the case is completely dry before re-installing your Apple Watch.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the TPU material and finish.
- Storage: When not in use, store the case in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
If you encounter any issues with your Spigen Rugged Armor Pro case, refer to the following common solutions:
- Difficulty Inserting/Removing Watch: Ensure you are applying even pressure. The case is designed for a secure fit. Avoid forcing the watch, which could cause damage.
- Buttons Not Responsive: Check that the Apple Watch is correctly seated within the case and that the case's button covers align perfectly with the watch's buttons. Remove and re-install if necessary.
- Charging Issues: Verify that the charging puck is properly connected and that the back of the Apple Watch is making full contact with the charger. The case is designed for wireless charging compatibility.
- Loose Fit: If the band feels loose, adjust the buckle to a tighter hole. If the watch feels loose within the case, ensure it is fully inserted and compatible with the case size (45mm/44mm).
Specifications
| Feature | Detail |
|---|---|
| Model Number | 062CS25324 |
| Material | Thermoplastic Polyurethane (TPU) |
| Compatibility | Apple Watch 45mm/44mm (Series SE3/9/8/SE2/7/6/SE/5/4) |
| Wrist Size Range | 5.5" (140mm) - 8.5" (215mm) |
| Clasp Type | Tang Buckle |
| Design Features | Unibody construction, carbon fiber accents, raised edges for screen protection, precise cutouts for full functionality. |
Warranty and Support
For warranty information, product support, or further assistance, please visit the official Spigen website or contact their customer service directly. Keep your proof of purchase for warranty claims.
You can find more information and support at the Spigen Store on Amazon.
