1. Introduction
Thank you for choosing the Artemide Tolomeo Table Lamp Micro. This manual provides essential information for the safe and efficient use of your new lamp. The Tolomeo Micro is designed with a fully adjustable, articulated anodized aluminum arm and body, featuring die-cast aluminum joints and tension control knobs for precise positioning. Its monochromatic matte finish complements various interior styles.
Please read this manual thoroughly before installation and operation, and retain it for future reference.
2. Safety Information
Observe the following safety precautions to prevent injury or damage to the lamp:
- Ensure the power supply voltage matches the lamp's requirements (120V).
- Always disconnect the lamp from the power outlet before cleaning, changing the bulb, or performing any maintenance.
- Do not exceed the maximum wattage specified for the bulb (100W max). Use only E26 (medium base) A19 compatible incandescent, compact fluorescent, or LED lamps.
- Avoid touching the bulb directly after use, as it may be hot.
- Do not operate the lamp with a damaged cord or plug. If damaged, contact qualified service personnel.
- Keep the lamp away from water or other liquids. Do not use in damp or wet locations.
- Ensure the lamp base is placed on a stable, level surface to prevent tipping.
- This lamp is designed for indoor use only.
3. Package Contents
Verify that all components are present in the package:
- Artemide Tolomeo Table Lamp Micro (Articulated Arm, Head, Base)
- Power Cable
- Bulb not included.
4. Setup
4.1 Unpacking and Placement
Carefully remove all components from the packaging. Place the lamp base on a flat, stable surface. Ensure there is sufficient space for the articulated arm to extend and adjust without obstruction.
Image: Two Artemide Tolomeo Table Lamps, illustrating the adjustable arm and stable base design.
4.2 Bulb Installation
- Ensure the lamp is unplugged from the power outlet.
- Gently unscrew the lamp head to access the bulb socket.
- Insert an E26 (medium base) A19 compatible bulb, ensuring it does not exceed 100W.
- Screw the lamp head back into place securely.
Image: Close-up of the lamp head, indicating the area for bulb installation.
4.3 Power Connection
Plug the power cable into a standard 120V electrical outlet. Ensure the cable is not pinched or routed in a way that could cause a tripping hazard.
5. Operating Instructions
5.1 Turning On/Off
The Artemide Tolomeo Table Lamp Micro features a touch switch for convenient operation. Locate the touch-sensitive area on the lamp (typically on the base or head, refer to product specifics if available). A single touch will turn the lamp on or off.
5.2 Adjusting the Lamp
The lamp's articulated arm and head offer extensive adjustability:
- Arm Adjustment: Gently move the articulated aluminum arm to position the light source as desired. The tension control knobs at the joints allow for smooth movement and stable positioning.
- Shade Rotation: The lamp head can rotate 360 degrees, allowing you to direct light precisely where needed.
Image: Artemide Tolomeo Table Lamps in an extended position, highlighting the adjustable arm functionality.
6. Maintenance
6.1 Cleaning
Always unplug the lamp before cleaning.
- Wipe the aluminum surfaces with a soft, dry cloth.
- For stubborn marks, use a slightly damp cloth with a mild, non-abrasive cleaner. Dry immediately.
- Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
6.2 Bulb Replacement
Refer to section 4.2 for detailed bulb installation instructions. Ensure the lamp is unplugged and the bulb has cooled down before attempting to replace it.
6.3 Tension Adjustment
If the articulated arm feels too loose or too stiff, the tension control knobs at the joints can be adjusted. Turn them clockwise to increase tension or counter-clockwise to decrease tension, finding a comfortable balance for movement and stability.
7. Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Light flickers. |
|
|
| Arm does not hold position. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Artemide |
| Model | Tolomeo Table Lamp Micro |
| Part Number | 784862011120 |
| Dimensions (Max) | 50.81"D x 30.75"W x 17.52"H |
| Item Weight | 3 Pounds |
| Material | Cast Aluminum, Metal |
| Finish Type | Matte Finish |
| Bulb Base | E26 (Medium Base) |
| Max Wattage | 100 Watts |
| Light Source Type | CFL, Incandescent, LED compatible |
| Switch Type | Touch |
| Special Feature | Adjustable Arm, 360-degree Shade Rotation |
| Power Source | Corded Electric |
| Indoor/Outdoor Usage | Indoor |
9. Warranty and Support
Artemide products are manufactured to high-quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your purchase or visit the official Artemide website.
For technical support, replacement parts, or any inquiries not covered in this manual, please contact Artemide customer service through their official channels. Contact information can typically be found on the product packaging or the manufacturer's website.
