duxtop BT-180G3
Duxtop 1800W Portable Induction Cooktop User Manual
Model: BT-180G3
1. Introduction
The Duxtop 1800W Portable Induction Cooktop (Model: BT-180G3) is a versatile and efficient countertop burner designed for various cooking needs. Utilizing induction technology, it offers precise temperature control and rapid heating, making it ideal for homes, dorms, RVs, or as an extra cooking surface. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.

Image: The Duxtop 1800W Portable Induction Cooktop, showcasing its sleek design and control panel.
2. Important Safety Information
To prevent personal injury or property damage, please read and follow all safety instructions carefully before using the appliance.
- Always connect the cooktop to a 120V, 15 amp electrical outlet. Ensure the outlet is properly grounded.
- Use only induction-compatible cookware with a magnetic bottom and a diameter of at least 5 inches. The cooktop will not operate without compatible cookware.
- Do not touch the cooktop surface immediately after use, as residual heat from the cookware may keep it hot.
- The cooktop features an auto-pan detection system that will shut off the unit automatically after 60 seconds if no cookware is detected.
- Equipped with a diagnostic error message system and low/high voltage warning system for safe operation.
- Keep the cooktop away from water and other liquids. Do not immerse the unit in water.
- Ensure proper ventilation around the unit during operation. Do not block the air vents.
- This appliance is ETL approved, ensuring it meets safety standards.

Image: An illustration demonstrating the principle of induction cooking, highlighting the need for magnetic cookware.

Image: Visual guide for testing cookware compatibility using a magnet.
3. Product Features
The Duxtop Induction Cooktop is designed with user convenience and efficiency in mind:
- Power and Portability: Operates on a standard 120V, 15 amp electrical outlet, making it suitable for most North American homes. Its lightweight and compact design ensures easy handling and storage.
- Digital Control Panel: Features an intuitive digital interface for precise control over cooking settings.
- Temperature Control: Offers 10 temperature settings ranging from 140 °F to 460 °F (60 °C to 238 °C approx.) for diverse cooking needs.
- Power Levels: Provides 10 power levels from 200 to 1800 Watts, allowing for fine-tuned heat adjustments.
- Integrated Timer: Built-in count-down digital timer with 1-minute increments, up to 170 minutes.
- Easy to Clean: The glass cooktop surface is designed for effortless cleaning; simply wipe with a damp towel. Food does not burn onto the surface due to the absence of an open flame or heating element.
- Efficient Cooling: A durable 7-blade fan rapidly dissipates heat, contributing to a longer product life.
- Safety Features: Includes auto-pan detection, diagnostic error message system, and low/high voltage warning systems for enhanced safety.

Image: Visual representation of the cooktop's main features and specifications.

Image: Illustration of the cooktop's heat dissipation system.
4. Setup
- Unpacking: Carefully remove the cooktop from its packaging. Retain packaging for future storage or transport.
- Placement: Place the cooktop on a dry, stable, non-metallic, and heat-resistant surface. Ensure there is adequate space around the unit for ventilation (at least 4-6 inches from walls or other objects).
- Power Connection: Plug the power cord into a standard 120V, 15 amp electrical outlet. The unit will emit a beep and the power indicator light will illuminate, indicating it is in standby mode.
- Cookware Placement: Place induction-compatible cookware centrally on the cooking zone. The cooktop will not activate without proper cookware in place.
5. Operating Instructions
The Duxtop Induction Cooktop offers two primary cooking modes: Power Mode and Temperature Mode.
- Power On: Press the "ON/OFF" button to turn on the unit. The digital display will show "0" and the fan will start.
- Selecting Cooking Mode:
- Power Mode (Heating): Press the "HEATING(W)" button. The default power level is 5. Use the "+" and "-" buttons to adjust the power from 200W to 1800W (levels 1-10). This mode is ideal for rapid heating, boiling, or searing.
- Temperature Mode (Temp °F): Press the "TEMP(°F)" button. The default temperature is 320°F. Use the "+" and "-" buttons to adjust the temperature from 140°F to 460°F. This mode is suitable for simmering, frying, or maintaining specific temperatures.
- Using the Timer: Press the "TIMER(min)" button. Use the "+" and "-" buttons to set the desired cooking time in 1-minute increments, up to 170 minutes. Once the timer expires, the cooktop will automatically shut off.
- Auto-Pan Detection: If compatible cookware is removed from the cooktop during operation, the unit will beep and display an error code (e.g., E0). If cookware is not returned within 60 seconds, the unit will automatically shut off.
- Power Off: Press the "ON/OFF" button to turn off the cooktop. The fan may continue to run for a short period to cool down the unit.

Image: The cooktop in use, demonstrating its quick heating and user-friendly controls.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your Duxtop Induction Cooktop.
- Cleaning the Surface: After each use, ensure the cooktop is cool. Wipe the glass surface with a damp cloth or sponge. For stubborn stains, a mild non-abrasive cleaner can be used. Avoid harsh chemicals or abrasive pads.
- Cleaning the Vents: Periodically check the air intake and exhaust vents for dust or debris. Use a soft brush or vacuum cleaner to gently clean them, ensuring proper airflow.
- Storage: When not in use, store the cooktop in a dry place, away from direct sunlight and moisture.

Image: Demonstrating the ease of cleaning the cooktop surface.
7. Troubleshooting
If you encounter issues with your Duxtop Induction Cooktop, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power, loose plug, faulty outlet. | Check power cord connection. Ensure outlet is functional. Try a different outlet. |
| Cooktop displays an error code (e.g., E0). | Incompatible cookware, no cookware detected, cookware too small. | Ensure cookware is induction-compatible and has a magnetic bottom. Use cookware with a diameter of at least 5 inches. Place cookware centrally on the cooking zone. |
| Food not heating or heating slowly. | Incorrect power/temperature setting, non-compatible cookware. | Increase power or temperature setting. Verify cookware compatibility. |
| Loud fan noise. | Normal operation, especially at higher power levels. | This is normal. The 7-blade fan works to dissipate heat efficiently. Ensure vents are not blocked. |
For a comprehensive list of error codes and advanced troubleshooting, please refer to the full user manual available for download.
8. Specifications
| Attribute | Value |
|---|---|
| Model Number | BT-180G3 |
| Color | Silver |
| Material | Glass+PP |
| Product Dimensions (DxWxH) | 11.4"D x 13"W x 2.5"H |
| Item Weight | 5.8 Pounds |
| Wattage | 1800 watts |
| Voltage | 120 Volts |
| Heating Elements | 1 |
| Controls Type | Push Button |
| Burner Type | Induction |
| UPC | 769134703859 |

Image: Detailed dimensions of the Duxtop Induction Cooktop.
9. Warranty and Support
Duxtop, a brand of SECURA, stands behind its products with comprehensive warranties. For specific warranty details and to register your product, please visit the official Duxtop website or refer to the full user manual.
For further assistance, technical support, or to download the complete user manual in PDF format, please visit the official Duxtop support page or refer to the link below:
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.


