Introduction
The HyperX Alloy Core RGB is a membrane gaming keyboard designed for enhanced style and performance. It features dynamic RGB lighting effects, a durable construction, quiet and responsive keys with anti-ghosting, and spill resistance. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your keyboard.
Setup
To begin using your HyperX Alloy Core RGB keyboard, follow these simple steps:
- Connect the Keyboard: Plug the USB cable from the keyboard into an available USB port on your computer.
- System Compatibility: The keyboard is compatible with Windows 10, 8.1, 8, and 7. No additional drivers are typically required for basic functionality.
- Initial Power On: The keyboard's RGB lighting will illuminate upon successful connection.

Operating Your Keyboard
The HyperX Alloy Core RGB keyboard offers various features to enhance your gaming and typing experience.
RGB Lighting Effects
The keyboard features a signature light bar and dynamic RGB lighting with six different effects and three brightness levels. You can cycle through these effects and adjust brightness directly on the keyboard.
- Preset Effects: Color Cycle, Spectrum Wave, Breathing, Solid, 5 Zones, and Aurora.
- Brightness Adjustment: Use the dedicated brightness button (sun icon) located on the top left of the keyboard to cycle through brightness levels.
- Lighting Mode Selection: Use the dedicated lighting mode button (color wheel icon) to switch between the preset RGB effects.


Dedicated Media Controls
Conveniently control your media playback with the dedicated media keys located on the top right of the keyboard. These include volume up, volume down, mute, play/pause, previous track, and next track.

Quick Access Buttons
In addition to lighting controls, the keyboard features quick access buttons for Game Mode and Keyboard Lock.
- Game Mode: Activate Game Mode using the dedicated button (target icon) to prevent accidental interruptions during gameplay, such as disabling the Windows key.
- Keyboard Lock Mode: Secure your station by locking the keyboard without putting your entire system on standby. Press the FN key + the Keyboard Lock key (keyboard icon) to toggle this feature.


Product Features Overview
Watch this official video for a comprehensive overview of the HyperX Alloy Core RGB keyboard's key features and design.
Maintenance
To ensure the longevity and optimal performance of your HyperX Alloy Core RGB keyboard, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe down the keyboard surface. For deeper cleaning, a slightly damp cloth can be used, ensuring no liquid enters the key switches.
- Spill Resistance: The keyboard is tested to withstand up to 120ml of liquid. In case of a spill, immediately unplug the keyboard, wipe off excess liquid, and allow it to air dry completely before reconnecting. While spill-resistant, it is not waterproof, and excessive liquid exposure should be avoided.

Troubleshooting
If you encounter issues with your HyperX Alloy Core RGB keyboard, try the following solutions:
- Keyboard Not Responding:
- Ensure the USB cable is securely plugged into both the keyboard and the computer.
- Try plugging the keyboard into a different USB port.
- Restart your computer.
- Lighting Not Working/Incorrect:
- Press the brightness button (sun icon) to ensure the lighting is not turned off or set to the lowest brightness.
- Press the lighting mode button (color wheel icon) to cycle through different effects.
- Ensure Keyboard Lock Mode is not active, as some modes might affect lighting.
- Keys Not Registering (Anti-Ghosting):
- The keyboard features gaming-grade anti-ghosting. If keys are not registering, ensure no debris is under the keycap.
- Test the keyboard on another computer to rule out system-specific issues.
- Game Mode Issues:
- Ensure the Game Mode button (target icon) is illuminated, indicating it is active. Press it again to toggle.
For further assistance, please refer to the official HyperX support resources.
Specifications
| Feature | Detail |
|---|---|
| Brand | HyperX |
| Series | Alloy Core RGB |
| Model Number | HX-KB5ME2-US |
| Hardware Platform | PC |
| Operating System Compatibility | Windows® 10, 8.1, 8, 7 |
| Item Weight | 2.47 pounds |
| Product Dimensions (LxWxH) | 17.4 x 6.9 x 1.4 inches |
| Color | Black |
| Power Source | Corded Electric |
| Connectivity Technology | USB 2.0 |
| Keyboard Description | Gaming |
| Special Features | Backlit, Spill Proof |
| Number of Keys | Full-size (implied by layout, 87 keys is incorrect based on image) |
| Keyboard Backlighting | RGB |
Warranty and Support
For warranty information and technical support regarding your HyperX Alloy Core RGB keyboard, please visit the official HyperX website or contact their customer service.
You can also find more products and information on the HyperX Amazon Store.





