1. Product Overview
The TTEC EasyRide™ Universal Bike Phone Holder Mount is designed to securely hold your smartphone on bicycle or motorcycle handlebars. Made from durable silicone, it provides a stable and accessible platform for your device, allowing for easy navigation, fitness tracking, or communication while riding. Its universal design accommodates smartphones up to 6 inches.
Image 1.1: The TTEC EasyRide Phone Holder securely mounted on a bicycle handlebar with a smartphone in place, displaying various app icons.
2. Package Contents
Please check the package contents to ensure all items are present:
- 1 x TTEC EasyRide™ Universal Bike Phone Holder Mount
Image 2.1: The TTEC EasyRide Phone Holder Mount, showcasing its flexible silicone design and handlebar clamp.
3. Setup Instructions
Follow these steps to properly install your TTEC EasyRide™ Phone Holder Mount:
- Identify Handlebar Location: Choose a suitable, clear section on your bicycle or motorcycle handlebar for mounting. Ensure it does not obstruct your view or access to controls.
- Attach the Mount: Open the clamp of the phone holder and position it around the chosen section of the handlebar. Securely close the clamp. The silicone material should provide a snug fit.
- Insert Your Smartphone: Gently stretch the silicone straps of the holder to fit around the four corners of your smartphone. Ensure the phone is centered and held firmly by all four straps. The flexible silicone allows for various phone sizes up to 6 inches.
- Verify Security: Before riding, gently tug on the phone and the mount to ensure they are securely attached and do not wobble.
4. Operating Instructions
Once installed, using your TTEC EasyRide™ Phone Holder is straightforward:
- Phone Orientation: The flexible design allows you to rotate your phone to either portrait or landscape orientation as needed for navigation or viewing.
- Accessibility: The silicone design ensures that all ports, buttons, and cameras on your smartphone remain accessible for use while mounted.
- Safe Riding: Always prioritize safe riding. Avoid prolonged interaction with your phone while in motion. Use voice commands or pull over to a safe location if you need to operate your device.
Image 4.1: A user navigating with their smartphone securely held by the TTEC EasyRide mount on a bicycle handlebar.
Image 4.2: Another perspective of the TTEC EasyRide mount in use, showing its low profile and secure fit on the handlebar.
5. Maintenance
To ensure the longevity and optimal performance of your phone holder:
- Cleaning: Wipe the silicone mount with a damp cloth to remove dust or dirt. Avoid harsh chemicals or abrasive cleaners.
- Storage: When not in use, store the mount in a cool, dry place away from direct sunlight to prevent material degradation.
- Inspection: Periodically inspect the silicone for any signs of wear, tears, or damage. Replace the mount if any significant damage is observed to ensure continued security.
6. Troubleshooting
If you encounter any issues with your TTEC EasyRide™ Phone Holder, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Phone feels loose or insecure. | Straps not properly stretched over phone corners; phone size exceeds recommended limit. | Ensure all four silicone straps are fully stretched and gripping the phone's corners. Verify your phone's dimensions are within the 6-inch limit. |
| Mount slips on handlebar. | Clamp not securely closed; handlebar surface is too smooth or oily. | Re-attach the mount, ensuring the clamp is tightly secured. Clean the handlebar surface where the mount is attached. |
| Difficulty inserting/removing phone. | New silicone material; incorrect technique. | The silicone may be stiff initially; it will become more flexible with use. Gently stretch one corner at a time when inserting or removing the phone. |
7. Specifications
Key specifications for the TTEC EasyRide™ Universal Bike Phone Holder Mount:
- Model Number: 2TT12
- Material: Silicone
- Mounting Type: Handlebar
- Compatible Devices: Smartphones up to 6 inches
- Product Dimensions (L x W x H): 12 x 3 x 17 cm
- Item Weight: 300 g
8. Warranty and Support
For warranty information or technical support, please contact TTEC customer service through their official website or the retailer from whom you purchased the product. Please have your model number (2TT12) and purchase details ready when contacting support.
For further assistance, visit: www.ttec.com
