Symbol SAC9000-4000R 4-Slot Battery Charger Kit User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient use of the Symbol SAC9000-4000R 4-Slot Battery Charger Kit. This kit is designed to charge batteries for Symbol MC9000 series handheld mobile computers, including models MC9090-G, MC9190-G, MC92N0, MC9060, and 9200. Please read this manual thoroughly before operating the device.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in fire, electric shock, or other injury or damage.

• Use only the power supply and cords provided or specified by the manufacturer for this device.
• Do not expose the charger or power supply to water or excessive moisture.
• Do not attempt to disassemble or modify the charger or power supply. Refer all servicing to qualified personnel.
• Ensure proper ventilation around the charger during operation.
• Unplug the charger from the power outlet before cleaning or when not in use for extended periods.

3. Package Contents

Verify that all items listed below are present in your package:

• Symbol SAC9000-4000R 4-Slot Battery Charger
• Power Supply (Model: SYM04-2 or equivalent)
• DC Line Cord
• AC Line Cord

4. Setup

Follow these steps to set up your SAC9000-4000R 4-Slot Battery Charger:

1. Connect the AC Line Cord to the Power Supply.
2. Connect the DC Line Cord from the Power Supply to the DC input port on the back of the SAC9000-4000R Charger.
3. Plug the AC Line Cord into a standard electrical outlet. The charger is now ready for use.

Figure 4.1: SYM04-2 Power Supply Unit. This unit converts AC power to the DC power required by the charger.

Figure 4.2: Symbol SAC9000-4000R Charger Unit Base. Shows model information and regulatory labels.

5. Operating Instructions

The SAC9000-4000R charger features four independent charging slots for Symbol MC9000 series batteries.

1. Ensure the charger is properly connected to a power source as described in the Setup section.
2. Insert a compatible battery into an available charging slot. Ensure the battery is seated correctly and makes full contact with the charging terminals.
3. The charger will automatically begin the charging process. While specific LED indicators are not detailed in this manual, typically a solid or blinking light indicates charging, and a steady green light indicates a full charge. Refer to your battery's specific documentation for detailed LED behavior if available.
4. Once charging is complete, remove the battery from the slot.

Compatible Devices: This charger is designed for batteries used with Symbol MC9090-G, MC9190-G, MC92N0, MC9060, 9200, and other MC9000 series handheld mobile computers.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your charger.

• Cleaning: Disconnect the charger from power before cleaning. Use a soft, dry, lint-free cloth to wipe the exterior surfaces. Do not use liquid cleaners or abrasive materials.
• Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Inspection: Periodically inspect the power cords and charger for any signs of damage. Do not use if damaged.

7. Troubleshooting

If you encounter issues with your charger, refer to the following common problems and solutions:

• Charger Not Powering On:
  • Ensure the AC line cord is securely plugged into a working electrical outlet.
  • Verify that the DC line cord is firmly connected between the power supply and the charger.
  • Check if the power outlet is functional by plugging in another device.
• Batteries Not Charging:
  • Ensure the battery is correctly inserted into the charging slot, making full contact with the terminals.
  • Try a different charging slot to rule out a faulty slot.
  • Test with a different, known-good battery to determine if the issue is with the battery or the charger.
  • Confirm that the battery is compatible with the SAC9000-4000R charger.

8. Specifications

9. Warranty and Support

Warranty: This Symbol SAC9000-4000R 4-Slot Battery Charger Kit comes with a 90-day limited warranty. Please retain your proof of purchase for warranty claims.

Support: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your vendor or the manufacturer's customer support. Refer to the contact information provided with your purchase or visit the official Symbol/Motorola website for support resources.