1. Introduction
The Dräger Alcotest 5000 is a professional-grade digital breath alcohol screening device designed for rapid and hygienic detection of alcohol presence in individuals. It is primarily used for mass screening applications, such as at events or in workplaces, to quickly determine if a person has consumed alcohol. This device provides a clear indication of alcohol presence without quantifying the exact blood alcohol concentration (BAC).
2. Safety Information
- This device is intended for screening purposes only and should not be used for precise legal blood alcohol concentration (BAC) measurements.
- Always use genuine Dräger mouthpieces to ensure hygienic and accurate operation.
- Do not operate the device in explosive atmospheres.
- Keep the device dry and clean. Avoid exposure to extreme temperatures or direct sunlight.
- Refer to local regulations and guidelines regarding alcohol screening procedures.
3. Package Contents
Verify that all items are present in the package:
- Dräger Alcotest 5000 device
- Non-contact funnel mouthpieces (multiple units)
- Wrist strap
- Instruction Manual
- 3 AA batteries (may be pre-installed or included separately)
Image: The Dräger Alcotest 5000 device, its packaging box, and individually wrapped non-contact funnel mouthpieces.
4. Device Overview
The Dräger Alcotest 5000 features a robust design with an intuitive interface for ease of use. Key components include the display, control buttons, and the non-contact funnel mouthpiece.
Image: Front view of the Dräger Alcotest 5000, highlighting the display screen, 'OK' button, and navigation arrows.
Image: Three views of the Alcotest 5000: front with display, side profile, and rear showing model information and 'Made in Germany' label.
5. Setup
5.1 Battery Installation
- Locate the battery compartment cover on the rear of the device.
- Open the cover and insert three (3) AA alkaline batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
5.2 Attaching the Mouthpiece
- Remove a fresh, non-contact funnel mouthpiece from its packaging.
- Gently push the mouthpiece onto the designated opening at the top of the device until it clicks into place. Ensure it is firmly seated.
6. Operating Instructions
6.1 Powering On/Off
- To power on: Press the OK button. The device will perform a self-test and then display 'READY'.
- To power off: Press and hold the OK button until the display turns off. The device will automatically power off after a period of inactivity.
6.2 Performing a Test
- Ensure the device is powered on and displays 'READY'.
- Instruct the test subject to take a deep breath and then blow steadily into the non-contact funnel mouthpiece until a signal indicates the end of the breath sample. Maintain a distance to avoid direct contact with the mouthpiece.
- The device will analyze the breath sample.
Image: An individual providing a breath sample into the Alcotest 5000's non-contact funnel mouthpiece.
6.3 Interpreting Results
The device will display one of two results:
- '0.00' or 'NO ALCOHOL': Indicates no alcohol detected.
- 'ALCOHOL DETECTED' or 'X': Indicates the presence of alcohol.
Image: The device displaying a 'Negative result' (no alcohol) and a 'Positive result' (alcohol detected).
6.4 Mouthpiece Exchange
For hygienic reasons, it is recommended to replace the mouthpiece after each test or as required by your screening protocol.
- Grasp the used mouthpiece and pull it gently but firmly away from the device.
- Dispose of the used mouthpiece responsibly.
- Attach a new, clean mouthpiece as described in Section 5.2.
Image: A hand detaching the non-contact funnel mouthpiece from the Alcotest 5000 device.
7. Maintenance
7.1 Cleaning
- Wipe the exterior of the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Ensure no liquid enters the mouthpiece opening or other device apertures.
7.2 Storage
- Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- Remove batteries if the device will not be used for an extended period to prevent leakage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low or dead batteries; Incorrect battery installation | Replace batteries with new AA alkaline batteries; Check battery polarity |
| 'ERROR' message on display | Improper breath sample; Device malfunction | Ensure a steady and sufficient breath sample; Power off and restart the device. If error persists, contact support. |
| Inconsistent results | Used or contaminated mouthpiece; Environmental factors | Always use a fresh mouthpiece for each test; Ensure testing environment is free from strong alcohol vapors. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Name | Alcotest 5000 |
| Item Model Number | 8327701 |
| Brand | Dräger |
| Sensor Type | Electrochemical DrägerSensor |
| Power Source | 3 AA batteries |
| Item Weight | 0.07 Kilograms (approx. 2.47 ounces) |
| Package Dimensions | 9.72 x 4.96 x 2.87 inches |
| Global Trade Identification Number (GTIN) | 04026056021406 |
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Dräger website or contact your authorized Dräger distributor. Keep your purchase receipt and the device's serial number handy when contacting support.
Visit the official Dräger store for more products and information: Dräger Store on Amazon
