HTZSAFE Wireless Door/Window Magnetic Sensor Alarm User Manual

1. Introduction

The HTZSAFE Wireless Door/Window Magnetic Sensor Alarm system is designed to provide security alerts for your home or business. This system includes one wireless door/window sensor and one plug-in receiver. It features a long wireless transmission range, multiple melody options, and adjustable volume levels. This manual provides instructions for proper installation, operation, and maintenance of your alarm system.

2. Package Contents

Please verify that all items are present in your package:

1 x HTZSAFE Wireless Door/Window Sensor
1 x HTZSAFE Plug-in Receiver
Mounting accessories (double-sided adhesive tape, screws)
User Manual (this document)

3. Product Components

Familiarize yourself with the main components of the HTZSAFE Wireless Door/Window Magnetic Sensor Alarm system:

Diagram showing the parts of the HTZSAFE plug-in alarm receiver and wireless door/window sensor.

Image 3.1: Diagram illustrating the Plug-in Alarm Receiver and Wireless Door/Window Sensor components and their dimensions. The receiver features a power plug, volume buttons, melody selection, and an indicator light. The sensor consists of a main body with an indicator light and a separate magnet.

3.1. Plug-in Receiver

Power Plug: Connects to a standard electrical outlet.
Volume Buttons: Adjust the alarm volume (4 levels).
Melody Button: Cycles through 35 available melodies.
Indicator Light: Illuminates when an alert is received.
Speaker: Emits the selected melody.

3.2. Wireless Door/Window Sensor

Sensor Body: The main unit containing the wireless transmitter and internal components.
Magnet: A smaller component that triggers the sensor when separated from the sensor body.
Indicator Light: Flashes when the sensor is triggered or transmitting a signal.

4. Setup and Installation

The HTZSAFE system is designed for easy setup. The sensor and receiver are pre-programmed at the factory. Follow these steps for installation:

4.1. Install the Wireless Door/Window Sensor

Identify a suitable location on your door or window frame. The sensor body and magnet should be mounted on the same plane, with a maximum gap of 8mm when the door/window is closed.
Clean the surface thoroughly where the sensor and magnet will be attached.
Peel the backing from the double-sided adhesive tape and firmly press the sensor body onto the door/window frame.
Mount the magnet directly adjacent to the sensor body on the moving part of the door/window, ensuring the alignment marks on both parts face each other. The gap between the sensor body and magnet should not exceed 8mm when the door/window is closed.
Test the installation by opening and closing the door/window. The sensor's indicator light should flash, and the receiver should sound an alarm.

HTZSAFE wireless door/window sensor installed on a door frame, with a baby nearby, indicating its use for child safety alerts.

Image 4.1: Example of the wireless door/window sensor installed on a door frame. The sensor (larger part) is on the frame, and the magnet (smaller part) is on the door itself. When the door opens, the magnet separates from the sensor, triggering an alert.

4.2. Plug in the Receiver

Select a standard electrical outlet in a central location within your property, ideally within 600 feet of the sensor.
Plug the receiver into the chosen outlet. The receiver will power on and be ready to receive signals from the sensor.

Diagram illustrating the 600 feet wireless transmission range of the HTZSAFE system through walls and floors in a multi-room house.

Image 4.2: Visual representation of the wireless transmission range, demonstrating the ability of the signal to pass through doors, walls, and floors up to 600 feet, ensuring coverage throughout a typical home or business.

5. Operating Instructions

5.1. Adjusting Volume

The receiver has 4 adjustable volume levels. Press the Volume button on the side of the receiver to cycle through the volume settings until you reach your desired level.

5.2. Changing Melodies

The receiver offers 35 classic melodies. Press the Melody button on the side of the receiver to cycle through the available tunes. You can select a different melody for each sensor if you expand your system.

5.3. System Operation

When the door or window where the sensor is installed opens, the magnet separates from the sensor body. This triggers the sensor to send a wireless signal to the plug-in receiver. The receiver will then sound the selected melody and its indicator light will flash, alerting you to the open entry point.

5.4. Expanding Your System

The HTZSAFE system is fully expandable. You can add up to 32 additional sensors (including other HTZSAFE solar wireless driveway alarm sensors) and an unlimited number of receivers for comprehensive coverage. Refer to the specific instructions provided with additional sensors for pairing procedures, if required.

6. Maintenance

6.1. Cleaning

Wipe the sensor and receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the device surfaces.

6.2. Battery Replacement (Sensor)

The wireless sensor is typically powered by a coin cell battery. When the sensor's indicator light no longer flashes or the transmission range decreases significantly, it may be time to replace the battery. To replace:

Carefully open the sensor casing.
Remove the old battery.
Insert a new battery with the correct polarity.
Close the sensor casing securely.
Test the sensor to ensure proper operation.

Note: Dispose of used batteries responsibly according to local regulations.

7. Troubleshooting

Problem	Possible Cause	Solution
Receiver does not sound alarm when sensor is triggered.	Receiver not plugged in or powered. Sensor battery is low or depleted. Sensor and magnet are too far apart when closed. Sensor and receiver are out of range. Interference from other wireless devices.	Ensure receiver is securely plugged into a working outlet. Replace the sensor battery. Adjust sensor and magnet placement to ensure the gap is within 8mm when closed. Relocate receiver closer to the sensor or choose a more central outlet. Try moving the receiver or sensor to minimize interference.
False alarms.	Sensor and magnet are not securely mounted. Door/window shaking due to wind or vibrations.	Re-secure the sensor and magnet using stronger adhesive or screws. Ensure the door/window is stable. The sensor is designed to tolerate some movement, but excessive shaking may trigger it.
Short wireless range.	Obstructions (thick walls, metal objects). Sensor battery is low. Interference.	Relocate receiver or sensor to minimize obstructions. Replace the sensor battery. Identify and reduce sources of wireless interference.

8. Specifications

Model: B07HJ66PP2
Brand: HTZSAFE
Wireless Transmission Range: Up to 600 feet (actual range may vary)
Melodies: 35 selectable options
Volume Levels: 4 adjustable levels
Sensor Gap Tolerance: Up to 8mm between sensor body and magnet
Expandability: Supports up to 32 sensors and unlimited receivers
Compatible Devices: HTZSAFE Solar Wireless Driveway Alarm Systems, HTZSAFE Wireless Sensors
Mounting Type: Window Mount or Door Mount
Control Method: Touch (on receiver)
Sensor Technology: Magnetic Sensor
Item Weight: 0.18 Kilograms (for the kit)
UPC: 605244295399

9. Warranty and Support

9.1. Warranty Information

HTZSAFE provides a 2-year warranty for this product. Additionally, a 90-day risk-free offer is available. Please retain your proof of purchase for warranty claims.

9.2. Customer Support

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact HTZSAFE customer support. Refer to the product packaging or the official HTZSAFE website for the most current contact information.

HTZSAFE B07HJ66PP2