1. Product Overview
These Snnalosses 25 Watt E12 G50 Incandescent Wax Warmer Bulbs are designed to provide the necessary heat for melting wax cubes in full-size wax warmers. They offer a flameless, smokeless, and pollution-free method for fragrance release, eliminating fire hazards associated with traditional candles. The bulbs emit a warm white light and are dimmable, allowing for control over wax melting speed and fragrance intensity.
Image 1.1: A Snnalosses 25 Watt E12 G50 Wax Warmer Bulb, highlighting its globe shape and E12 candelabra base, suitable for full-size wax warmers.
2. Safety Information
- Ensure the wax warmer is unplugged before installing or replacing bulbs.
- Allow the bulb to cool completely before handling to prevent burns.
- Use only in compatible wax warmers that specify E12 candelabra base and 25 Watt incandescent bulbs.
- Do not exceed the maximum wattage specified by your wax warmer.
- Keep bulbs away from water or damp environments.
- These bulbs are designed for indoor use only.
- The bulbs are designed with high-temperature protection, resisting up to 300°C/527°F, to prevent overheating.
3. Package Contents
The package includes:
- 6 x Snnalosses 25 Watt E12 G50 Wax Warmer Bulbs
4. Setup & Installation
- Unplug the Warmer: Ensure your wax warmer is completely unplugged from the power outlet before beginning installation.
- Remove Old Bulb (if applicable): If replacing an old bulb, allow it to cool down. Gently unscrew the old bulb counter-clockwise from the E12 candelabra base.
- Insert New Bulb: Carefully screw the new Snnalosses 25 Watt E12 G50 bulb clockwise into the E12 candelabra base of your wax warmer until it is snug. Do not overtighten.
- Verify Compatibility: These bulbs are specifically designed for full-size wax warmers. Please check your warmer's specifications to ensure compatibility with G50 globe bulbs and E12 candelabra bases.
Image 4.1: Compatibility guide for Snnalosses 25 Watt bulbs, indicating suitability for full-size warmers and unsuitability for mid-size or plug-in warmers.
5. Operating Instructions
- Power On: Plug your wax warmer into a suitable power outlet.
- Add Wax: Place your desired wax melts or essential oils into the dish of the wax warmer.
- Adjust Brightness (if applicable): If your wax warmer has a dimmer function, you can adjust the bulb's brightness. A brighter setting will melt the wax faster, resulting in a stronger fragrance release. A lower setting will melt the wax slower, providing a more subtle aroma.
- Fragrance Release: The bulb's heat will melt the wax, releasing the fragrance into your space. This process is flameless and smokeless.
Image 5.1: Illustration of brightness adjustment on a wax warmer, demonstrating how higher brightness leads to faster wax melting and stronger fragrance.
Image 5.2: A wax warmer in operation, illustrating the release of fragrance through heat emission, providing a flameless and smokeless experience.
6. Maintenance
- Cleaning: Ensure the bulb is cool and the warmer is unplugged before cleaning. Wipe the bulb gently with a dry, soft cloth if necessary. Do not use liquid cleaners.
- Lifespan: Each bulb has an average lifespan of 3000+ hours. Replace the bulb when it no longer illuminates or heats effectively.
- Storage: Store unused bulbs in their original packaging in a cool, dry place.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | 1. Bulb is not screwed in properly. 2. Bulb is burnt out. 3. Warmer is not plugged in or power outlet is faulty. | 1. Ensure the bulb is securely screwed into the socket. 2. Replace the bulb with a new one. 3. Check if the warmer is plugged in and test the outlet with another device. |
| Wax is not melting or melting slowly. | 1. Bulb wattage is too low. 2. Dimmer setting is too low. 3. Bulb is faulty. | 1. Ensure you are using a 25 Watt bulb for full-size warmers. 2. Increase the brightness setting on your dimmer-enabled warmer. 3. Replace the bulb. |
| Bulb flickers. | 1. Loose connection. 2. Incompatible dimmer. 3. Bulb nearing end of life. | 1. Ensure the bulb is tightly screwed in. 2. Use a dimmer compatible with incandescent bulbs. 3. Replace the bulb. |
Image 7.1: Visual comparison demonstrating the absence of flicker in Snnalosses bulbs, contributing to reduced eye fatigue.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Snnalosses |
| Light Type | Incandescent |
| Wattage | 25 Watts |
| Voltage | 120 Volts |
| Bulb Base | E12 Candelabra |
| Bulb Shape Size | G50 (Globe) / G16 1/2 |
| Light Color | Warm White |
| Color Temperature | 2700 Kelvin |
| Brightness | 180 Lumens |
| Dimmable | Yes |
| Average Life | 3000+ Hours |
| High Temperature Resistance | Up to 300°C / 527°F |
| Product Dimensions | 1.94"W x 2.8"H |
| Material | Glass |
| Indoor/Outdoor Usage | Indoor |
9. Warranty and Support
Snnalosses is committed to providing high-quality products. For any questions, concerns, or support needs regarding your 25 Watt Wax Warmer Bulbs, please contact our customer service. While specific warranty details are not provided in this manual, we aim for your full satisfaction.
Please refer to the retailer's return policy or contact Snnalosses customer service for assistance.