Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your HP 649327-002 2TB 7200RPM LFF 3.5-inch 6G SAS SC Midline Hot Plug Smart Hard Drive with Tray. Please read this manual thoroughly before proceeding with installation or use.
Safety Information
Observe the following safety precautions to prevent damage to the product or injury to yourself:
- Ensure the host system is powered off and disconnected from the power source before installation or removal.
- Handle the hard drive by its tray to avoid touching sensitive components.
- Static electricity can damage electronic components. Use appropriate electrostatic discharge (ESD) precautions.
- Do not expose the hard drive to moisture or extreme temperatures.
Package Contents
Verify that all items are present:
- HP 649327-002 2TB 7200RPM LFF 3.5-inch 6G SAS SC Midline Hot Plug Smart Hard Drive with Tray
- (This instruction manual)
Figure 1: HP 649327-002 2TB 7200RPM SAS Hard Drive with Tray. An image showing the HP 649327-002 2TB 7200RPM SAS Hard Drive, mounted in its hot-plug tray. The drive features a metallic casing with a label displaying product information, and the black tray has a red release button on the right side.
Setup and Installation
Follow these steps to install the hard drive into a compatible server or storage system:
- Prepare the System: Power down the server or storage system and disconnect all power cables.
- Locate Drive Bay: Identify an available 3.5-inch hot-plug drive bay.
- Remove Blank/Existing Drive: If a blank filler panel or an existing drive is present, press the release button (often red) on the drive tray and carefully pull it out of the bay.
- Insert New Drive: Align the HP 649327-002 hard drive with its tray into the empty drive bay. Gently push the drive into the bay until it clicks securely into place. Ensure the release lever is flush with the drive bay.
- Reconnect Power: Reconnect power cables and power on the system.
- System Recognition: The system's operating system or RAID controller should detect the new drive. Follow your system's documentation for configuring the new drive (e.g., creating RAID arrays, formatting).
Operating the Hard Drive
Once installed and configured, the HP 649327-002 hard drive operates as a standard storage device within your system. Its operation is managed by the host system's operating system and storage controller.
- Data Access: Access data on the drive through your operating system's file management tools.
- Hot-Plug Capability: This drive supports hot-plug functionality, allowing it to be inserted or removed while the system is running, provided the host system and controller support this feature and the drive is properly unmounted or offline. Always consult your server's documentation for hot-plug procedures.
- Performance: The 7200RPM rotational speed and 6Gbps SAS interface provide high-speed data transfer for demanding applications.
Maintenance
Hard drives generally require minimal physical maintenance. Adhere to the following guidelines:
- Environmental Control: Ensure the operating environment maintains appropriate temperature and humidity levels as specified by your server or storage system manufacturer.
- Firmware Updates: Periodically check the HP support website for firmware updates for your hard drive model. Apply updates as recommended by HP.
- Data Backup: Regularly back up critical data to prevent loss in case of drive failure.
- Cleaning: Keep the drive bays and surrounding areas free of dust to ensure proper airflow and cooling.
Troubleshooting
If you encounter issues with your hard drive, consider the following:
- Drive Not Detected:
- Verify the drive is fully seated in its bay.
- Check the server's BIOS/UEFI or RAID controller settings to ensure the drive is recognized.
- Ensure the SAS controller drivers are correctly installed and up to date.
- Test the drive in a different, known-good drive bay if available.
- Performance Issues:
- Check for system resource bottlenecks (CPU, RAM).
- Ensure the SAS controller is operating at its optimal speed (6Gbps).
- Monitor drive health using SMART tools.
- Unusual Noises: Immediately back up data and consider replacing the drive if it emits clicking, grinding, or other abnormal sounds.
Specifications
| Feature | Description |
|---|---|
| Model Number | 649327-002 |
| Capacity | 2 TB (2000 GB) |
| Rotational Speed | 7200 RPM |
| Interface | SAS (Serial Attached SCSI) 6Gbps |
| Form Factor | 3.5-inch Large Form Factor (LFF) |
| Type | Midline Hot Plug Smart Hard Drive |
| Weight | Approximately 1 pound |
| Compatible Devices | Desktop (compatible with systems supporting 3.5-inch SAS drives) |
Warranty and Support
This product is typically offered as a Certified Refurbished item and comes with a minimum 90-day warranty. For specific warranty details and support, please refer to the documentation provided by your reseller or the official HP support channels.
For technical assistance, visit the official HP support website or contact their customer service.