Ecolab Clearly Soft Low Temp Laundry Solid Instruction Manual

1. Product Overview

The Ecolab Clearly Soft Low Temp Laundry Solid is a highly concentrated, solid-form laundry detergent designed for efficient use in industrial low-temperature laundry systems. This product is formulated to deliver effective cleaning and softening results while being fragrance-free and allergen-free. It is supplied in capsule form for controlled dosing and ease of use. This product is intended for industrial use only.

Figure 1: Two Ecolab Clearly Soft Low Temp Laundry Solid capsules. These solid capsules are designed for precise dosing in industrial laundry machines.

2. Safety Information

This product is for industrial use only. Read and understand all safety information before handling or using this product. Always refer to the Safety Data Sheet (SDS) for complete hazard and precautionary statements.

• Keep Out of Reach: Store away from children and pets.
• Eye Contact: Avoid direct contact with eyes. In case of contact, rinse immediately with plenty of water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation persists, seek medical attention.
• Skin Contact: Avoid prolonged or repeated skin contact. Wash hands thoroughly after handling. If irritation occurs, wash affected area with soap and water.
• Ingestion: Do not ingest. If swallowed, rinse mouth with water and drink a glass of water. Do not induce vomiting. Seek immediate medical attention.
• Inhalation: Avoid breathing dust. Use in a well-ventilated area.
• Personal Protective Equipment (PPE): When handling, consider wearing protective gloves and eye protection to minimize exposure.

3. Setup and Preparation

1. System Compatibility: Ensure your industrial laundry machine is equipped with a dispenser designed for solid detergent capsules.
2. Dispenser Identification: Locate the designated dispenser compartment for solid detergents in your laundry system.
3. Dry Hands: Always ensure hands are completely dry before handling the solid capsules to prevent premature dissolution or stickiness.
4. Inspect Capsules: Before use, visually inspect capsules for any damage. Do not use damaged capsules.

4. Operating Instructions

Follow these steps for effective use of Ecolab Clearly Soft Low Temp Laundry Solid:

1. Load Laundry: Load the industrial washing machine with the appropriate amount of laundry according to the machine's capacity and guidelines.
2. Insert Capsule: With dry hands, place one (1) Ecolab Clearly Soft Low Temp Laundry Solid capsule directly into the designated solid detergent dispenser of your industrial laundry machine. Refer to your machine's manual for specific dispenser location.
3. Select Cycle: Choose the appropriate low-temperature wash cycle for your laundry type. This product is optimized for low-temperature washing.
4. Start Machine: Initiate the wash cycle. The capsule will dissolve during the wash, releasing the detergent and softening agents.
5. Drying: After the wash cycle, proceed with standard drying procedures for your laundry.

Note: For optimal results and specific dosing recommendations based on water hardness or soil level, consult with your Ecolab representative or refer to your facility's specific laundry program guidelines.

5. Storage and Handling

• Storage Conditions: Store in a cool, dry, well-ventilated area. Keep the product in its original packaging, tightly closed when not in use.
• Temperature: Avoid extreme temperatures. Do not store in direct sunlight or near heat sources.
• Moisture Protection: Protect from moisture and humidity to prevent premature dissolution or degradation of the capsules.
• Incompatible Materials: Keep away from strong acids and oxidizing agents.

6. Product Specifications

7. Disposal Considerations

Dispose of empty product containers and any unused product in accordance with all applicable local, regional, national, and international regulations. Consult with local waste management authorities for specific disposal instructions for industrial chemical products.

8. Warranty and Support

For product support, technical assistance, or warranty information, please contact your authorized Ecolab distributor or visit the official Ecolab website. Ensure you have the product name (Ecolab Clearly Soft Low Temp Laundry Solid) and ASIN (B07HGHTCSG) available when seeking support.

Ecolab is committed to providing high-quality products and support for industrial applications.