1. Introduction
This manual provides instructions for the installation and care of your Everbilt 1-5/16 inch Heavy-Duty Brushed Nickel Closet Pole Sockets. These sockets are designed to securely hold a closet pole, allowing for efficient closet organization. Please read these instructions carefully before installation and retain them for future reference.
2. Package Contents
Verify that all components are present before beginning installation.
- 1x Open-lip closet pole socket (Brushed Nickel)
- 1x Closed-lip closet pole socket (Brushed Nickel)
- Mounting screws (quantity sufficient for both sockets)
Image 1: Contents of the Everbilt Closet Pole Sockets package. Includes one open-lip socket and one closed-lip socket, both in a brushed nickel finish, with visible screw holes for mounting.
3. Safety Information
- Always wear appropriate safety gear, such as safety glasses, when drilling or installing hardware.
- Ensure the mounting surface is structurally sound and capable of supporting the weight of the closet pole and its contents.
- Use the correct tools for installation to prevent damage to the product or injury.
- Keep small parts, such as screws, out of reach of children.
4. Setup and Installation
These sockets are designed for a 1-5/16 inch diameter closet pole. Ensure your pole matches this dimension.
- Determine Placement: Mark the desired height and location for your closet pole. Ensure the locations for both sockets are level and spaced appropriately for your closet pole length.
- Mount the Closed-Lip Socket: Position the closed-lip socket against the wall at one end of your desired pole location. Use a pencil to mark the screw hole locations. Drill pilot holes if necessary, then secure the socket using the provided mounting screws.
- Insert Closet Pole: Slide your 1-5/16 inch closet pole into the mounted closed-lip socket.
- Mount the Open-Lip Socket: With the pole inserted into the closed-lip socket, position the open-lip socket at the other end of the pole, ensuring the pole rests within its opening. Mark the screw hole locations. Drill pilot holes if necessary, then secure the open-lip socket using the provided mounting screws. This design allows for easy installation of the pole after one socket is fixed.
- Verify Security: Gently tug on the installed closet pole to ensure both sockets are firmly attached and the pole is stable.
Image 2: A closed-lip socket securely mounted to a wall, demonstrating how a closet rod fits into the socket. The mounting screws are visible.
Image 3: An open-lip socket installed on a wall, with a closet rod resting within its U-shaped opening. This image shows the final installed appearance with the rod in place.
5. Operating Instructions
Once installed, the Everbilt Closet Pole Sockets function as a fixed support for your closet rod. Hang clothing and other items on the rod as desired, ensuring not to exceed the weight capacity of your closet rod and mounting surface.
6. Maintenance
- Cleaning: To clean the brushed nickel finish, wipe with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
- Inspection: Periodically check the mounting screws for tightness. Re-tighten if necessary to ensure continued stability.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Sockets feel loose after installation. | Screws are not fully tightened or mounting surface is weak. | Ensure screws are fully tightened. If the surface is weak, consider using wall anchors (not included) or mounting to a wall stud. |
| Closet pole does not fit. | Incorrect pole diameter. | These sockets are designed for 1-5/16 inch diameter poles. Verify your pole's diameter. |
| Finish appears dull or scratched. | Abrasive cleaning agents used or physical damage. | Clean only with a soft, damp cloth. Avoid harsh chemicals. Minor scratches may be buffed with a non-abrasive cloth. |
8. Specifications
- Product Name: Heavy-Duty Brushed Nickel Closet Pole Sockets
- Model Number: EH-WSTHDUS-324
- Brand: Everbilt
- Material: Cast Zinc
- Finish: Brushed Nickel
- Pole Diameter Compatibility: 1-5/16 inches
- Product Depth: 0.88 inches
- Product Height: 2.68 inches
- Product Width: 2.68 inches
- Mounting Type: Wall Mount
9. Warranty Information
Specific warranty details for Everbilt products may vary. Please refer to the product packaging or the official Everbilt website for the most current warranty information. Generally, products are warranted against defects in material and workmanship under normal use.
10. Support
For technical assistance, missing parts, or further inquiries, please contact Everbilt customer service. Contact information can typically be found on the product packaging or the official Everbilt website.
Note: Product specifications and appearance are subject to change without notice.