Introduction
Thank you for purchasing the NEDIS Wired Microphone with Clip, model MICCJ100BK. This omnidirectional microphone is designed for versatile use with smartphones, tablets, and other compatible devices, offering clear audio capture in a compact and lightweight design. Please read this manual carefully before use to ensure proper operation and maintenance.
Package Contents
- NEDIS Wired Microphone (MICCJ100BK)
- Integrated 3.5mm audio cable (1.80 m)
- Integrated clip
Image: The microphone, its attached cable, and the clip are shown. The microphone is small and black, with a 3.5mm jack at the end of the cable.
Setup
- Connect the Microphone: Insert the 3.5mm audio jack of the microphone into the microphone input port of your compatible device (smartphone, tablet, computer, etc.). Ensure the connection is secure.
- Position the Microphone: Use the integrated clip to attach the microphone to your clothing, such as a lapel or collar, approximately 15-30 cm (6-12 inches) from your mouth for optimal sound capture. The omnidirectional polar pattern allows for sound pickup from all directions.
- Device Settings: Depending on your device, you may need to select the external microphone as the audio input source in your device's sound settings or the recording application you are using.
Image: A close-up view of the black microphone with its clip and the pink-colored 3.5mm audio jack, illustrating the connection point.
Operating Instructions
The NEDIS MICCJ100BK microphone is a plug-and-play device. Once connected and selected as the input source, it is ready for use.
- Recording: Open your preferred audio or video recording application on your device. Start recording as you normally would. The microphone will capture audio.
- Live Communication: For video calls, online meetings, or live streaming, ensure the microphone is selected as the input device in the application's settings.
- Monitoring: Some devices or applications allow real-time audio monitoring. If available, use this feature to check the sound quality and adjust microphone placement if necessary.
Image: A person is playing an acoustic guitar, and the small black microphone is clipped to their clothing, demonstrating a typical use case for audio recording.
Maintenance and Care
- Cleaning: Wipe the microphone and cable with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the microphone in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid tangling the cable.
- Handling: Handle the microphone and its cable gently. Avoid pulling on the cable or subjecting the microphone to strong impacts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or low volume |
|
|
| Distorted or unclear sound |
|
|
Specifications
- Model: MICCJ100BK
- Connectivity: Wired, 3.5mm Jack (Auxiliary)
- Polar Pattern: Omnidirectional
- Frequency Response: 100 Hz - 10 kHz
- Audio Sensitivity: 40 dB
- Signal-to-Noise Ratio (S/N): 76 dB
- Impedance: 250 Ohms
- Operating Voltage: 1-10 V (Standard 3 V)
- Consumption Current: 350 mA max
- Cable Length: 1.80 m
- Color: Black
- Special Feature: Lightweight, Integrated Clip
- Compatible Devices: Smartphones, Tablets, PCs with 3.5mm microphone input
- Dimensions (Microphone): Approximately 1.3 x 1.3 cm (diameter x length)
- Manufacturer: NEDIS
- Country of Origin: France
Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official NEDIS website. Keep your proof of purchase for any warranty claims.
Manufacturer: NEDIS
Model Number: MICCJ100BK