1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your AntLux 4FT LED Wraparound Light Fixture. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for indoor use, providing 5500 lumens of 4000K neutral white light at 50 watts.
Figure 1: AntLux 4FT LED Wraparound Light Fixture
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. Improper wiring can result in electric shock or fire.
- Ensure the power supply is turned off before installation, maintenance, or cleaning.
- All wiring connections must be in accordance with local and national electrical codes.
- If you are unsure about the installation process, consult a qualified electrician.
- Do not install near heat sources or in areas with high humidity.
- This fixture is for indoor use only and is not water resistant.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- AntLux 4FT LED Wraparound Light Fixture (Quantity: 4)
- Mounting Hardware (screws, anchors)
- Instruction Manual
4. Specifications
| Feature | Specification |
|---|---|
| Brand | ANTLUX |
| Model Name | 4FT |
| Wattage | 50 Watts |
| Brightness | 5500 Lumens |
| Color Temperature | 4000K Neutral White |
| Voltage | 120 Volts |
| Material | Aluminum |
| Product Dimensions | 1.65"L x 4"W x 47.2"H |
| Installation Type | Flush Mount / Surface Mount |
| Average Life | 50,000 Hours |
| CRI | 90.00 |
| Included Components | LED Strip |
Note: Specifications are subject to change without notice.
5. Setup and Installation
The AntLux 4FT LED Wraparound Light Fixture is designed for easy flush or surface mount installation. Ensure power is disconnected before beginning.
5.1. Preparing the Fixture
- Carefully remove the fixture from its packaging.
- Locate the end caps and the center section. The center section can be opened to access wiring.
Figure 2: Easy and Fast Installation Mechanism
The fixture features a design that allows for single-person mounting. The nuts can be revolved by hand to secure the cover, providing access to the wiring compartment without requiring additional tools for initial opening.
5.2. Mounting the Fixture
- Mark the desired mounting locations on the ceiling or wall.
- Drill pilot holes and insert appropriate anchors if mounting into drywall.
- Secure the fixture base to the mounting surface using the provided screws.
Figure 3: Product Dimensions and LED Strips
5.3. Electrical Connection
- Route the electrical wiring into the fixture's wiring compartment.
- Connect the live (black), neutral (white), and ground (green/bare copper) wires from the power supply to the corresponding wires in the fixture. Ensure all connections are secure.
- Carefully tuck all wires into the wiring compartment and close the cover.
5.4. Linkable Installation (Optional)
Multiple fixtures can be linked together for continuous lighting. Knock out the designated holes on the ends of the fixtures and connect them in line using appropriate connectors (not included).
Figure 4: Linkable Feature for Multiple Fixtures
6. Operating Instructions
Once installed and wired correctly, the AntLux 4FT LED Wraparound Light Fixture operates by a standard wall switch or other connected control method. Simply toggle the switch to turn the light on or off.
- Light Output: Provides 5500 lumens of bright, 4000K neutral white light.
- No Glare Design: The frosted diffuser ensures soft, uniform illumination without harsh glare.
Figure 5: New Design with 180° Shining and Frosted Diffuser
7. Maintenance
The AntLux LED fixture is designed for minimal maintenance. Regular cleaning and occasional checks are recommended.
- Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check for any loose connections or visible damage. Address any issues promptly.
- Lifespan: The LED strips have an average lifespan of 50,000 hours, providing long-term, maintenance-free operation.
Figure 6: Durable and High-Performance Features
8. Troubleshooting
If you encounter issues with your AntLux LED fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; Loose wiring; Faulty switch | Check circuit breaker/fuse; Verify all wire connections; Test or replace switch. |
| Light flickers | Loose wiring; Incompatible dimmer (if applicable); Power fluctuations | Check wiring connections; Ensure stable power supply. This fixture uses a constant current driver for stable performance. |
| Reduced brightness | Dust/dirt on diffuser; Aging LED components | Clean the diffuser; LED components have a long lifespan, but eventual degradation is normal. |
If the problem persists after attempting these solutions, please contact customer support.
9. Application Examples
The AntLux 4FT LED Wraparound Light Fixture is versatile and suitable for various indoor environments requiring bright, uniform illumination.
9.1. Garage Lighting
Figure 7: Garage Application
9.2. Laundry Room Lighting
Figure 8: Laundry Room Application
9.3. Kitchen Lighting
Figure 9: Kitchen Application
10. Warranty and Support
This AntLux product comes with a Seller warranty. For specific warranty terms and conditions, please refer to your purchase documentation or contact the seller directly.
If you require any support or have questions regarding your product, please email our professional after-sales team. We are committed to providing timely assistance and a satisfactory solution.
Contact Support: Refer to your purchase platform or product packaging for direct contact information.