HyperX Alloy FPS RGB Gaming Keyboard User Manual

1. Introduction

This manual provides comprehensive instructions for the HyperX Alloy FPS RGB Gaming Keyboard, Model HX-KB1SS2-DE. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read this manual carefully before using the keyboard.

2. Package Contents

• HyperX Alloy FPS RGB Gaming Keyboard (HX-KB1SS2-DE)
• Detachable USB-C to USB-A Cable

3. Setup

3.1 Connecting the Keyboard

1. Locate the USB-C port on the back of the keyboard.
2. Connect the smaller USB-C end of the provided cable to the keyboard.
3. Connect the larger USB-A end of the cable to an available USB port on your computer.
4. The keyboard will automatically be detected and installed by your operating system.

3.2 Software Installation (HyperX NGenuity)

For advanced customization of RGB lighting, macros, and profiles, download and install the HyperX NGenuity software from the official HyperX website. This software allows you to personalize your keyboard experience.

4. Operating Instructions

4.1 Standard Key Functions

The HyperX Alloy FPS RGB keyboard features a QWERTZ German layout with standard key functions. All keys operate as labeled for typing and general computer use.

4.2 RGB Lighting Control

The keyboard features customizable RGB backlighting. You can adjust lighting effects and brightness directly from the keyboard or through the HyperX NGenuity software.

• Change Lighting Modes: Press FN + F1, FN + F2, or FN + F3 to cycle through different pre-set lighting effects or custom profiles stored on the keyboard.
• Adjust Brightness: Press FN + Up Arrow to increase brightness and FN + Down Arrow to decrease brightness.

4.3 Gaming Mode

Activate Gaming Mode to prevent accidental interruptions during gameplay.

• Enable/Disable Gaming Mode: Press FN + F12. When enabled, the Windows key will be disabled to prevent accidental presses that could minimize your game.

4.4 N-Key Rollover and Anti-Ghosting

The HyperX Alloy FPS RGB keyboard supports 100% anti-ghosting and N-key rollover, ensuring that every key press is registered accurately, even when multiple keys are pressed simultaneously. This feature is crucial for fast-paced gaming.

4.5 Onboard Memory

The keyboard includes internal memory to store up to three custom profiles. These profiles can include personalized RGB lighting settings and macro assignments, allowing you to carry your preferences with you.

4.6 USB Charging Port

A convenient USB charging port is located on the keyboard, allowing you to charge compatible devices directly from the keyboard.

5. Maintenance

5.1 Cleaning the Keyboard

• Disconnect the keyboard from your computer before cleaning.
• Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and chassis.
• Avoid spraying liquids directly onto the keyboard.
• For dust and debris between keys, use compressed air.

5.2 Cable Care

The detachable braided cable is designed for durability. To prolong its life, avoid sharp bends or excessive pulling. Store it neatly when not in use or during transport.

6. Troubleshooting

6.1 Keyboard Not Responding

• Ensure the USB cable is securely connected to both the keyboard and the computer.
• Try connecting the keyboard to a different USB port on your computer.
• Restart your computer.
• Test the keyboard on another computer if possible to rule out a computer-specific issue.

6.2 RGB Lighting Issues

• Verify that the keyboard is properly connected and receiving power.
• Ensure the brightness is not set to the lowest level using FN + Up Arrow.
• Check the HyperX NGenuity software for any conflicting settings or to reset lighting profiles.

6.3 Keys Not Registering

• Clean the affected keys to remove any debris that might be obstructing the switch.
• Ensure the keyboard firmware is up to date via the HyperX NGenuity software.
• If the issue persists, contact HyperX support.

7. Specifications

8. Warranty and Support

HyperX products are manufactured to the highest quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official HyperX website.

For technical support, driver downloads, or further assistance, please visit the official HyperX support page: www.hyperx.com/support