Introduction
The Feit Electric Multi-Color Rotating Disco Party LED Light Bulb (Model DISCO1/LED/RP) is designed to provide a dynamic, color-changing light effect for various indoor settings. This bulb features a diamond-cut lens that rotates to project vibrant patterns, creating an engaging visual experience. It is suitable for decorative lighting in homes, for special occasions, or in recreational spaces. This manual provides instructions for safe installation, operation, and maintenance of your light bulb.
Safety Information
Please read and understand all safety instructions before installing or using this product. Failure to do so may result in electric shock, fire, or other hazards.
- Risk of Electric Shock: Do not use with wet hands or in wet conditions.
- Risk of Fire: Do not exceed the maximum wattage rating of the fixture. This bulb is 5 watts.
- Indoor Use Only: This bulb is rated for indoor use in damp locations.
- Non-Dimmable: This LED bulb is non-dimmable. Do not use with dimmer switches.
- Installation: Ensure power is turned off at the switch and circuit breaker before installation or removal.
Package Contents
Your package should contain the following item:
- 1 x Feit Electric DISCO1/LED/RP Multi-Color Rotating Disco Party LED Light Bulb
Image: The Feit Electric Disco Party Bulb shown alongside its retail packaging.
Setup
This LED light bulb is designed for easy installation into standard E26 medium base fixtures.
- Turn off Power: Before installation, ensure the power to the light fixture is turned off at the wall switch and the circuit breaker to prevent electric shock.
- Screw in Bulb: Carefully screw the Feit Electric Disco Party LED Light Bulb into an empty E26 medium base socket. Do not overtighten.
- Restore Power: Once the bulb is securely installed, restore power at the circuit breaker and turn on the wall switch.
Image: A hand demonstrates screwing the Feit Electric Disco Party Bulb into a pendant light fixture, illustrating the simple installation process.
Operating Instructions
The Feit Electric Disco Party LED Light Bulb operates automatically once power is supplied.
- Power On: Turn on the light switch connected to the fixture where the bulb is installed. The bulb will illuminate and begin its multi-color rotating effect automatically.
- Power Off: To turn off the light effect, simply turn off the light switch.
The bulb's internal diamond lens rotates 360 degrees, projecting various colored light patterns onto surrounding surfaces.
Image: The Feit Electric Disco Party Bulb is shown with an arrow indicating its 360-degree head rotation, highlighting its dynamic light projection capability.
Maintenance
The Feit Electric Disco Party LED Light Bulb requires minimal maintenance.
- Cleaning: Ensure the bulb is cool and the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the bulb's surface or internal components.
- Storage: If storing the bulb for an extended period, keep it in its original packaging in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture. Bulb not screwed in properly. Bulb is faulty. | Check power supply and wall switch. Ensure bulb is securely screwed into the socket. Test bulb in another working fixture. |
| Rotating effect is not working. | Internal mechanism fault. | Ensure the bulb is receiving full power. If the issue persists, the bulb may be faulty and require replacement. |
| Light output is dim or inconsistent. | Low voltage. Bulb nearing end of life. | Ensure the fixture provides adequate voltage (120V). If the bulb is old, it may need replacement. |
Specifications
Detailed technical specifications for the Feit Electric DISCO1/LED/RP Multi-Color Rotating Disco Party LED Light Bulb.
| Feature | Detail |
|---|---|
| Model Number | DISCO1/LED/RP |
| Light Type | LED |
| Wattage | 5 watts |
| Incandescent Equivalent | 40 watts |
| Bulb Shape Size | A23 |
| Bulb Base | E26 Medium Base |
| Light Color | Multicolor (RGB) |
| Light Output | 450 lumens |
| Voltage | 120 volts |
| Operating Life | 10,000 hours |
| Indoor/Outdoor Usage | Indoor (Damp Location Rated) |
| Material | Plastic |
| Certification | UL Listed |
Image: A diagram illustrating the bulb's dimensions (5.2 in. height, 3.1 in. diameter) and key specifications including light color (RGBW), wattage (5W), brightness (180 Lumens), life hours (10,000 Hours), bulb shape (A23), base code (E26), non-dimmable status, and safety location (Damp).
Warranty
This Feit Electric LED bulb comes with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation included with your product or visit the Feit Electric website.
Support
For technical assistance, troubleshooting, or any questions regarding your Feit Electric Disco Party LED Light Bulb, please contact Feit Electric customer support. Live chat troubleshooting may be available through the official Feit Electric website.
Manufacturer: Feit Electric
Website: www.feit.com