ASA WVH100
Contents
Voyager WVH100 Digital Wireless WiSight RV BackUp Observation Camera User Manual
Model: WVH100 | Brand: ASA
1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Voyager WVH100 Digital Wireless WiSight RV BackUp Observation Camera. This system is designed specifically for RVs equipped with a factory-installed Voyager WiSight Technology pre-wire plate, offering a reliable solution for rear observation.
The WVH100 camera integrates seamlessly with existing Voyager monitors (WVOM541AP and WVOM43, sold separately) and features WiSight Digital Wireless Technology for real-time video transmission, even at highway speeds. It includes high-performance color optics, a CMOS sensor, IR LED low-light assist, and an integrated audio microphone, all within a waterproof design.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the product:
- Ensure the vehicle's power is disconnected before installation to avoid electrical shock.
- Do not attempt to disassemble or modify the camera. Refer all servicing to qualified personnel.
- Keep the camera lens clean and free from obstructions for optimal performance.
- This camera is designed to assist with observation; it is not a substitute for careful driving and proper use of mirrors.
- Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
3. Package Contents
Verify that all items are present before beginning installation:
- Voyager WVH100 Digital Wireless Camera
- Mounting Screws (typically re-use existing screws from pre-wire plate)
- Instruction Manual (this document)
Note: Monitors (WVOM541AP and WVOM43) are sold separately and are required for system operation.
4. Setup and Installation
The WVH100 camera is designed for easy installation on RVs with a factory-installed Voyager WiSight Technology pre-wire plate. This plate is typically located on the rear of the trailer and provides a 12V DC socket connected to the vehicle's existing wiring.
4.1. Pre-Installation Steps
- Locate the Voyager WiSight Technology pre-wire plate on your RV.
- Ensure the vehicle's ignition is off and the power to the pre-wire plate is disconnected.
- Carefully remove the four screws securing the pre-wire plate and remove the plate. This will expose the 12V DC socket. Retain these screws as they will be used for mounting the camera.
4.2. Camera Mounting
- Connect the WVH100 camera's power cable directly into the 12V DC socket exposed by removing the pre-wire plate. Ensure a secure connection.
- Align the camera with the mounting holes where the pre-wire plate was located.
- Secure the camera using the four screws previously removed from the pre-wire plate. Ensure the camera is firmly attached and the antenna is positioned for optimal signal reception.

Figure 4.2.1: Voyager WVH100 camera and WiSight pre-wire plate. The camera is designed to replace the plate directly.

Figure 4.2.2: Rear view of the WVH100 camera, highlighting the power connector designed to plug into the RV's pre-wired socket.
4.3. Pairing with Monitor (if applicable)
If you are using a new monitor or need to re-pair your camera, refer to your specific Voyager monitor's user manual for pairing instructions. The WiSight Digital Wireless Technology typically allows for automatic pairing once both devices are powered on and within range, but manual pairing may be required in some cases.
5. Operating Instructions
Once the camera is installed and paired with a compatible Voyager monitor, operation is straightforward.
5.1. Powering On the System
The camera receives power from the RV's 12V DC system. It will typically power on when the RV's ignition is on or when the specific circuit it's connected to is activated. Refer to your RV's manual for details on the pre-wire plate's power activation.
5.2. Viewing the Camera Feed
Turn on your Voyager monitor. The camera feed should automatically display. The WVH100 provides a wide-angle view (135° diagonal, 102° horizontal, 72° vertical) with a mirror (reversed) image orientation, suitable for rear observation and backing maneuvers.

Figure 5.2.1: Front view of the WVH100 camera, showing the lens and antenna for wireless transmission.
5.3. Low-Light Operation
The camera is equipped with IR LED low-light assist, which automatically activates in dim lighting conditions to provide improved visibility. The image may appear black and white in very low light.
5.4. Audio Functionality
An integrated audio microphone allows for sound transmission from the camera's vicinity to the monitor. This can be useful for communication during backing procedures.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your WVH100 camera.
- Cleaning the Lens: Periodically clean the camera lens with a soft, damp cloth. Avoid abrasive cleaners or materials that could scratch the lens.
- Checking Connections: Annually inspect the camera's mounting and electrical connection for any signs of loosening or corrosion. Ensure all screws are tight.
- Waterproofing: While the camera is waterproof (IPX6 rated), consider adding a bead of silicone sealant around the mounting base for extra protection against extreme weather conditions, especially if the RV is frequently exposed to harsh environments.
7. Troubleshooting
If you experience issues with your WVH100 camera, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on monitor |
|
|
| Poor image quality / Flickering image |
|
|
| No audio |
|
|
If problems persist after attempting these solutions, contact ASA Electronics customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model | WVH100 |
| Power System | 12VDC |
| Operating Voltage Range | 10 ~ 18V |
| Power Consumption (MAX) | 230mA |
| Operating Temperature Range | -20°F to 65°F (-28.9°C to 18.3°C) |
| Storage Temperature Range | -30°F to 85°F (-34.4°C to 29.4°C) |
| Operating Relative Humidity | 100% |
| Waterproof Rating | IPX6 |
| Overall Dimensions (L x W x H) | 5.52" x 3.0" x 2.82" (14.02 cm x 7.62 cm x 7.16 cm) |
| Product Weight (unpackaged) | 10.56 oz (299.39 g) |
| Video Output Signal Format | NTSC |
| Video Output Signal Level | 1.0V p-p ; 75Ω |
| Audio | Integrated Microphone |
| Sensor | 1/3" CMOS |
| Sensitivity | 0 Lux |
| Image Orientation | Mirror (Reversed) |
| Resolution | 380 Lines |
| View Angles | 135° (D) 102° (H) 72° (V) |
9. Warranty Information
Specific warranty details for the Voyager WVH100 camera are typically provided with the product packaging or can be found on the manufacturer's official website. Generally, ASA Electronics products come with a limited warranty covering defects in materials and workmanship for a specified period from the date of purchase. Please retain your proof of purchase for warranty claims.
For detailed warranty terms and conditions, please visit the ASA Electronics website or contact their customer support.
10. Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact ASA Electronics customer support:
- Website: www.asaelectronics.com/support
- Phone: Refer to the website for current contact numbers.
- Email: Refer to the website for current email contact.
When contacting support, please have your product model number (WVH100) and purchase information ready.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.