1. Introduction
This manual provides essential information for the proper use and maintenance of your Beurer Power Supply. This power supply is designed to provide continuous power to compatible Beurer blood pressure monitors, offering an alternative to battery operation. Please read this manual thoroughly before first use to ensure safe and efficient operation.
2. Product Overview
The Beurer Power Supply is a compact and reliable adapter designed for specific Beurer blood pressure monitor models. It consists of a main adapter unit and an integrated power cable with a compatible connector.

Figure 1: Beurer Power Supply Unit. This image shows the white Beurer power supply unit. It features a rectangular adapter block connected to a white cable, which terminates in a cylindrical DC power connector. The cable is coiled neatly beside the adapter.
3. Setup
Follow these steps to set up your Beurer Power Supply:
- Identify the Power Port: Locate the DC power input port on your Beurer blood pressure monitor. This port is typically a small, round socket.
- Connect the Power Supply: Insert the cylindrical connector of the Beurer Power Supply cable firmly into the power input port of your blood pressure monitor. Ensure a secure connection.
- Plug into Outlet: Plug the main adapter unit of the power supply into a standard electrical wall outlet. Ensure the outlet provides the correct voltage as specified in the product's technical data.
- Verify Power: Once connected, your blood pressure monitor should receive power. If it has an indicator light, it may illuminate. You can now operate your device without batteries.
4. Operating Instructions
The Beurer Power Supply is designed for simple plug-and-play operation. Once correctly connected to your blood pressure monitor and a power outlet, it will provide the necessary power for the device to function.
- The power supply replaces the need for batteries, providing a continuous and stable power source.
- Always ensure the power supply is securely connected before operating your blood pressure monitor.
- Disconnect the power supply from the wall outlet when not in use for extended periods.
5. Maintenance
Proper maintenance ensures the longevity and reliable performance of your power supply:
- Cleaning: Clean the power supply unit and cable with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
- Storage: Store the power supply in a cool, dry place away from direct sunlight and extreme temperatures. Avoid kinking or bending the cable excessively.
- Inspection: Periodically inspect the cable and connector for any signs of damage, such as fraying or exposed wires. If damage is observed, discontinue use immediately and replace the unit.
6. Troubleshooting
If you encounter issues with your Beurer Power Supply, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blood pressure monitor does not power on when connected to the power supply. |
|
|
| Power supply feels unusually hot. |
|
|
If the problem persists after attempting these solutions, please contact Beurer customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Manufacturer | Beurer |
| Part Number | 071.95 |
| Item Weight | 249 g |
| Package Dimensions | 10.16 x 7.11 x 5.33 cm |
| Model Number | 1568 |
| Material | Stainless Steel |
| Batteries Included | No |
| Batteries Necessary | No |
| ASIN | B07H8FSRMM |
| First Available Date | October 22, 2018 |
8. Warranty and Support
For information regarding warranty coverage, technical support, or service, please refer to the official Beurer website or contact Beurer customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
Beurer GmbH
Söflinger Straße 218
89077 Ulm, Germany
For further assistance, please visit the Beurer Store on Amazon.