Salsbury Industries 18-51368 Single Tier Standard Metal Locker Instruction Manual

1. Product Overview

The Salsbury 18-51000 series 18" wide single tier standard lockers are constructed of 16 gauge steel, providing ample space for personal storage needs. This unassembled unit is designed for various applications including government agencies, law enforcement, locker rooms, employee changing rooms, and gyms.

• Compartment Dimensions: 18 inches W x 72 inches H x 18 inches D (per compartment)
• Overall Unit Dimensions: 18 inches W x 78 inches H x 18 inches D
• Each compartment includes an adjustable hat shelf, three wall hooks, and a coat rod for full garments.
• Features a lift-up handle and recessed hasp for security, accommodating combination or key padlocks.

2. Safety Information

Read and understand all safety instructions before assembly and use. Failure to follow these instructions may result in injury or property damage.

• Ensure proper installation to prevent tipping.
• Avoid overloading compartments.
• Securely mount the locker to a stable surface.
• Do not climb on the locker.
• Keep fingers clear of moving parts during assembly and operation.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact Salsbury Industries customer support.

• Locker panels (sides, back, top, bottom, doors)
• 6 inch legs
• Adjustable hat shelf
• Coat rod
• 3 single prong wall hooks
• 1 double prong ceiling hook
• Hardware (screws, nuts, bolts, etc.)
• Assembly instructions (English)

4. Setup and Assembly

This locker unit is shipped unassembled and requires assembly. Detailed assembly instructions in English are provided within the package. It is recommended to have at least two people for assembly.

4.1 Key Components and Features

Image 1: Overview of the Salsbury Industries metal locker, highlighting key features such as the adjustable hat shelf, coat rod, hooks for hanging items, two sets of louvers for ventilation, an optional name/number plate, and the lift-up handle with recessed hasp for locking.

4.2 Assembly Steps (General Guidance)

1. Unpack Components: Carefully remove all parts from the packaging and verify against the package contents list.
2. Assemble Base: Attach the 6-inch legs to the bottom panel of the locker.
3. Attach Side Panels: Secure the side panels to the bottom and back panels using the provided hardware.
4. Install Top Panel: Fasten the top panel to the assembled structure.
5. Install Interior Components: Place the adjustable hat shelf, coat rod, and wall/ceiling hooks as desired within each compartment.
6. Attach Doors: Mount the locker doors to the frame, ensuring they swing freely and align correctly.
7. Secure Unit: For stability and safety, it is highly recommended to securely mount the assembled locker unit to a wall or floor using appropriate anchoring hardware (not included).

5. Operating Instructions

The Salsbury Industries locker is designed for secure storage of personal items.

5.1 Opening and Closing the Door

• To open, lift the handle and pull the door outwards.
• To close, push the door shut until it latches securely.

5.2 Locking the Locker

The locker features a recessed hasp designed to accommodate a combination or key padlock (not included). Optional padlocks and built-in locks are available upon request from Salsbury Industries.

Image 2: Locker door shown with an optional combination padlock. This padlock is inserted into the recessed hasp for security.

Image 3: Locker door shown with an optional built-in combination lock. This type of lock is integrated into the door mechanism.

• Using a Padlock: Close the door, align the hasp, and insert your padlock through the opening. Secure the padlock.
• Using a Built-in Lock: Follow the specific instructions provided with your built-in lock for setting the combination or using the key.

6. Maintenance

Regular maintenance will ensure the longevity and proper function of your locker.

• Cleaning: Wipe down the locker surfaces with a soft, damp cloth and mild detergent. Avoid abrasive cleaners that can damage the powder-coated finish.
• Hinges: Periodically check door hinges for smooth operation. Apply a small amount of silicone lubricant if squeaking or stiffness occurs.
• Locks: If using a padlock, ensure it is in good working condition. For built-in locks, follow the manufacturer's maintenance recommendations.
• Inspection: Regularly inspect the locker for any loose hardware, damage, or signs of wear. Tighten fasteners as needed.

7. Troubleshooting

Refer to the following common issues and solutions.

• Door is Sticking: Check hinges for alignment and lubrication. Ensure no items inside the locker are obstructing the door's path.
• Door Not Latching: Verify that the locker is on a level surface. Check for any bent components around the latch mechanism.
• Lock Mechanism Issues: If using a padlock, ensure it is functioning correctly. For built-in locks, consult the lock's specific instructions or contact Salsbury Industries.
• Locker Wobbles: Ensure all assembly hardware is tightened. Verify the locker is securely mounted to a wall or floor.

8. Specifications

9. Warranty

This product is covered by a 3-year limited manufacturer warranty. For details regarding warranty claims or coverage, please refer to the warranty documentation included with your purchase or contact Salsbury Industries customer support.

10. Customer Support

For technical assistance, missing parts, or warranty inquiries, please contact Salsbury Industries customer support. Refer to the contact information provided in your product packaging or visit the official Salsbury Industries website.

Online Resources: www.salsburyindustries.com