Introduction
This manual provides essential instructions for the safe and effective use, setup, maintenance, and storage of your Flash Furniture Kathryn 8-foot Rectangular Adjustable Plastic Folding Event Table. This table is designed for versatility and durability, suitable for various indoor and outdoor events.

Figure 1: The Flash Furniture Kathryn 8-foot Rectangular Adjustable Folding Table in its open position.
Safety Information
WARNING: Do not exceed the weight limit of 661 lbs. Ensure the table is stable before use. Be cautious of pinch points when folding and unfolding the table. Always use the table on a stable, level surface.
Setup Instructions
- Unfolding the Table: Place the folded table on its side. Locate the leg assemblies. Gently pull each leg assembly outwards until it extends fully.
- Locking Legs into Place: Each leg assembly features a steel ring mechanism. Pull the ring outwards to release the leg, then push the leg into its fully extended position until it locks securely. Ensure both leg assemblies are firmly locked.
- Adjusting Height: The legs are height adjustable. Locate the adjustment pins on each leg. Press the pin and slide the inner leg section to the desired height. Ensure the pin snaps back into place in one of the pre-drilled holes for secure positioning.
- Final Placement: Carefully flip the table upright onto its feet. Verify that all legs are stable and locked before placing any items on the table.
Video 1: Demonstration of the table's setup and folding process, provided by Flash Furniture.
Operating the Table
The Flash Furniture Kathryn table is designed for versatile use in various settings. It comfortably seats up to 10 people.
- Weight Capacity: The table supports up to 661 pounds of static weight. Do not exceed this limit to prevent damage or injury.
- Usage Environment: Suitable for both indoor and outdoor events. The UV-protected high-density polyethylene tabletop resists sun damage.
- Surface Protection: The feet are equipped with rubber stoppers to prevent scratching wood or tile surfaces.

Figure 2: Visual representation of the table's dimensions, including adjustable height.
Maintenance
- Cleaning: Wipe the tabletop and frame with a damp cloth as needed. For stubborn stains, a mild soap solution can be used. Avoid abrasive cleaners that may damage the surface.
- Durability: The powder-coated steel frame and high-density polyethylene tabletop are designed to resist peeling, rusting, chipping, and discoloration over time.
Folding and Storage
- Folding Legs: Turn the table onto its side. Release the leg locking mechanisms by pulling the steel rings outwards, then fold the legs inwards towards the underside of the table. Secure them with the integrated clips.
- Bi-Fold Mechanism: Locate the trigger mechanism in the center of the table's underside. Press the trigger to release the tabletop hinge, allowing the table to fold in half.
- Securing for Transport: Once folded, the table has an attached carrying handle for easy transportation. Secure the two halves together using the integrated clamp.

Figure 3: The table folded in half, showcasing the convenient carrying handle for portability.
Troubleshooting
- Difficulty Folding/Unfolding: Ensure all leg locking mechanisms (steel rings and clips) are fully disengaged or engaged as required. Sometimes a firm but gentle force is needed to overcome initial resistance.
- Table Instability: Check that all legs are fully extended and their locking mechanisms are securely engaged. Ensure the table is placed on a flat, level surface. Uneven ground can cause instability.
- Tabletop Damage: While durable, avoid placing excessively hot items directly on the surface without protection. Do not use sharp objects directly on the tabletop to prevent scratches.
Specifications
| Feature | Detail |
|---|---|
| Brand | Flash Furniture |
| Model Number | RB-3096FH-ADJ-GG |
| Product Dimensions (D x W x H) | 96"D x 29"W x 28-34"H (Adjustable) |
| Item Weight | 38 Pounds |
| Maximum Weight Recommendation | 661 Pounds (Static) |
| Frame Material | Alloy Steel (Powder Coated) |
| Top Material Type | High-Density Polyethylene (HDPE) |
| Seating Capacity | 10 People |
| Tabletop Thickness | 1.5 Inches |
| Is Foldable | Yes (Bi-Fold) |
| Assembly Required | No |
Warranty and Support
This Flash Furniture product comes with a 1-year limited manufacturer's warranty.
For further assistance, product inquiries, or warranty claims, please contact Flash Furniture customer support through their official website or the retailer where the product was purchased.





