Introduction
Thank you for choosing the Beurer FM90 Shiatsu and Air Compression Foot Massager. This device is designed to provide a relaxing and invigorating foot massage experience, combining shiatsu massage, air compression, and an optional heat function. Please read this instruction manual thoroughly before first use to ensure safe operation and to understand all functions.
Image: Front view of the Beurer FM90 Shiatsu and Air Compression Foot Massager.
Important Safety Information
Always observe the following safety instructions. Failure to do so may result in personal injury or damage to the device.
- Read the entire instruction manual carefully before using the device.
- Keep this manual for future reference.
- Do not use the device if you have open wounds, skin diseases, or swelling on your feet.
- Consult a doctor before use if you have a pacemaker, diabetes, or other medical conditions.
- Ensure the power cord is not damaged and is connected to a suitable power outlet.
- Do not immerse the device in water or use it in damp environments.
- This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless supervised.
- Unplug the device from the power outlet after each use and before cleaning.
Product Features
The Beurer FM90 Foot Massager offers a range of features for a comprehensive foot massage:
- Dual Massage Function: Combines Shiatsu massage and air compression massage.
- Shiatsu Massage: Targets pressure points with rotating massage heads to relieve tension.
- Air Compression Massage: Features 3 intensity levels for customizable pressure.
- Optional Heat Function: Provides soothing warmth to enhance relaxation and circulation.
- 3 Pre-Set Programmes: Offers varied massage experiences.
- Foot Reflexology Nodules: Integrated into the sole and heel areas for targeted stimulation.
- Removable and Washable Inner Cover: Ensures hygiene and easy maintenance.
- Suitable for Various Foot Sizes: Accommodates up to shoe size 46.
Image: Diagram highlighting key features of the Beurer FM90 Foot Massager, including air pressure massage, shiatsu treatments, heat function, reflexology nodules, and washable cover.
Setup
- Unpacking: Carefully remove the foot massager from its packaging. Retain the packaging for future storage or transport.
- Placement: Place the device on a flat, stable, and dry surface. Ensure there is enough space around the device for comfortable use and proper ventilation.
- Power Connection: Insert the power plug into a suitable electrical outlet (AC 220-240V, 50/60Hz). Ensure your hands are dry when handling the plug.
- Initial Inspection: Before first use, inspect the device for any visible damage. Do not use if damaged.
Operating Instructions
Follow these steps to operate your Beurer FM90 Foot Massager:
- Positioning: Sit comfortably in a chair and place your bare feet into the foot openings of the massager. Ensure your feet are fully inserted and resting on the massage nodules.
- Power On: Press the Power button (usually marked with an 'On/Off' symbol) to turn on the device. The default massage program will typically start.
- Selecting Programmes: The FM90 features 3 pre-set programmes. Press the Programme button (often labeled 'P' or with a mode icon) repeatedly to cycle through the available programmes. Each programme offers a different combination of shiatsu and air compression.
- Adjusting Air Compression Intensity: Press the Air Compression button (often labeled 'A' or with air pressure icons) to adjust the intensity of the air compression massage. There are 3 intensity levels. Select the level that feels most comfortable.
- Activating Heat Function: Press the Heat button (often labeled with a 'Heat' or 'Sun' symbol) to activate the optional heat function. Press again to turn it off. The heat function can be used independently or in conjunction with any massage program.
- Duration: A typical massage session lasts 15-20 minutes. The device may have an automatic shut-off timer. Do not use for excessively long periods.
- Power Off: After your massage, press the Power button again to turn off the device. Unplug the power cord from the outlet.
Image: A woman comfortably using the Beurer FM90 Foot Massager, demonstrating typical usage.
Maintenance and Cleaning
Proper maintenance ensures the longevity and hygiene of your foot massager.
- Cleaning the Device:
- Always unplug the device before cleaning.
- Wipe the exterior of the massager with a soft, slightly damp cloth. Do not use abrasive cleaners or solvents.
- Ensure no water enters the interior of the device.
- Cleaning the Inner Cover:
- The inner fabric covers are removable and washable. Carefully detach them from the device.
- Wash the covers by hand or in a washing machine on a gentle cycle with mild detergent.
- Allow the covers to air dry completely before reattaching them to the massager.
- Storage:
- Store the device in a cool, dry place, away from direct sunlight and moisture.
- Keep it out of reach of children and pets.
- If storing for an extended period, it is recommended to place it back in its original packaging.
Troubleshooting
If you encounter any issues with your Beurer FM90, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Power cord not properly connected; no power from outlet; device malfunction. | Check power cord connection. Test outlet with another appliance. If problem persists, contact customer support. |
| Massage function is weak or not working. | Incorrect program selected; feet not properly positioned; internal issue. | Ensure feet are fully inserted. Try different massage programs. If issue continues, contact support. |
| Heat function is not noticeable. | Heat function not activated; takes time to warm up; ambient temperature too low. | Ensure heat function is turned on. Allow a few minutes for the heat to become noticeable. The heat is gentle and not intense. |
| Air compression is too strong or too weak. | Intensity level not adjusted. | Press the Air Compression button to cycle through the 3 intensity levels until a comfortable setting is found. |
If these solutions do not resolve the issue, please contact Beurer customer support.
Specifications
- Model Number: FM090
- Product Dimensions (LxWxH): 42 x 36 x 25 cm
- Item Weight: 4.5 kg
- Power Source: Corded Electric
- Power Consumption: 48 Watts
- Material: Plastic
- Color: Black
- Suitable Shoe Size: Up to EU size 46
- Country of Origin: India
Warranty and Customer Support
Beurer products are manufactured to high quality standards. In the event of a defect, please contact your retailer or the authorized service center.
- Manufacturer: Beurer GmbH
- Importer (India): Beurer India Pvt Ltd
- Address: 523- 524, JMD Megapolis, Sector - 48, Gurugram, Haryana-122018
- Email: support@beurerindia.com
- Phone: 01244477111
Please retain your proof of purchase for warranty claims.
