HAIBOXING 18859

HAIBOXING 1/18 Scale 4WD RC Monster Truck (Model 18859) Instruction Manual

Model: 18859

Introduction

This manual provides essential information for the safe and effective operation, maintenance, and care of your HAIBOXING 1/18 Scale 4WD RC Monster Truck. Please read it thoroughly before first use and retain it for future reference.

The HAIBOXING 1/18 Scale 4WD RC Monster Truck is designed for off-road performance, featuring a 4-wheel drive system, independent suspension, and durable components. It is equipped with a 2.4 GHz remote control system and a waterproof electronic system for versatile use across various terrains.

Package Contents

  • 1 x HAIBOXING 1/18 Scale 4WD RC Monster Truck
  • 1 x 2.4 GHz Remote Control
  • 2 x 7.4V 850mAh Li-Po Batteries
  • 1 x USB Charger
  • 4 x Body Clips (spare)
  • 1 x Body Sticker Sheet
  • 1 x Instruction Manual
HAIBOXING 1/18 Scale 4WD RC Monster Truck and accessories

Image: HAIBOXING 1/18 Scale 4WD RC Monster Truck with remote control, batteries, USB charger, body clips, and sticker sheet.

Setup

1. Charging the Vehicle Battery

  1. Connect the 7.4V 850mAh Li-Po battery to the USB charger.
  2. Plug the USB charger into a compatible USB power source (e.g., computer USB port, USB wall adapter).
  3. The indicator light on the charger will show the charging status (refer to charger instructions for specific light indications).
  4. Once fully charged, disconnect the battery from the charger. Do not overcharge.

2. Installing the Vehicle Battery

  1. Remove the body clips and lift the truck body.
  2. Locate the battery compartment.
  3. Insert the charged 7.4V 850mAh Li-Po battery into the compartment.
  4. Connect the battery's JST connector to the vehicle's ESC (Electronic Speed Controller) connector.
  5. Secure the battery within the compartment and reattach the truck body with the body clips.

3. Installing Remote Control Batteries

  1. Open the battery compartment on the underside of the remote control.
  2. Insert 3 AA batteries (not included), ensuring correct polarity.
  3. Close the battery compartment cover.

4. Binding the Remote Control

  1. Ensure both the vehicle and remote control are powered off.
  2. Turn on the remote control. The indicator light will flash.
  3. Turn on the vehicle. The indicator light on the remote control should become solid, indicating a successful bind.
  4. If binding fails, repeat the steps.
Diagram of the 2.4 GHz remote control with labeled functions

Image: Detailed diagram of the 2.4 GHz remote control, highlighting the steering wheel, trigger, power switch, steering trim, steering reverse switch, and slow/fast speed switch.

Operating Instructions

1. Basic Controls

  • Throttle Trigger: Pull the trigger to move forward. Push the trigger forward to brake, then push again for reverse.
  • Steering Wheel: Turn the steering wheel left or right to steer the vehicle.
  • Steering Trim: Adjust the steering trim dial on the remote control to ensure the vehicle drives straight when the steering wheel is centered.
  • Speed Switch: Use the slow/fast speed switch to adjust the vehicle's maximum speed. 'Slow' mode is recommended for beginners.

2. Driving Tips

  • Always operate the vehicle in open areas free from obstacles, people, or pets.
  • Avoid driving in heavy rain or submerging the vehicle in water, despite its splash-proof electronics.
  • The 4WD system and high-grip tires allow for operation on various surfaces including sand, grass, and dirt.
  • Practice at lower speeds initially to familiarize yourself with the controls.

Video: Official HAIBOXING video demonstrating the 1/18 Scale 4WD Off-Road Monster Truck (Model 18859) in various driving conditions, showcasing its speed and maneuverability.

HAIBOXING RC truck driving on a dirt track

Image: The HAIBOXING 1/18 Scale RC Monster Truck navigating a dirt track, demonstrating its off-road capabilities.

HAIBOXING RC truck driving through shallow water

Image: The HAIBOXING 1/18 Scale RC Monster Truck driving through shallow water, highlighting its splash-proof design.

Maintenance

1. General Cleaning

  • After each use, especially in dirty or wet conditions, clean the vehicle to remove dirt, dust, and moisture.
  • Use a soft brush or compressed air to remove debris from the chassis, suspension, and motor area.
  • Wipe down the body with a damp cloth. Avoid using harsh chemicals.

2. Battery Care and Storage

  • Always disconnect the battery from the vehicle when not in use.
  • Store Li-Po batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Do not store fully charged or fully discharged Li-Po batteries for extended periods. Charge them to a storage voltage (around 3.8V per cell) if storing for more than a few days.
  • Never leave charging batteries unattended.

3. Inspection

  • Regularly inspect all screws, nuts, and bolts to ensure they are tight.
  • Check the tires for wear and tear.
  • Examine the suspension components for any damage or excessive play.
  • Ensure the steering mechanism operates smoothly.
Exploded view diagram of the HAIBOXING RC truck chassis components

Image: Detailed diagram illustrating the internal components of the HAIBOXING RC truck, including the motor, servo, gears, battery, and suspension system.

Troubleshooting

ProblemPossible CauseSolution
Vehicle does not respond to remote control.Low battery in vehicle or remote; not bound correctly; power switch off.Charge vehicle battery; replace remote batteries; re-bind remote; ensure power switches are ON.
Short run time.Battery not fully charged; old battery; aggressive driving.Ensure full charge; consider replacing battery; drive less aggressively.
Vehicle pulls to one side.Steering trim not adjusted; damaged steering components.Adjust steering trim on remote; inspect steering assembly for damage.
Motor runs but wheels do not turn.Damaged gears or drivetrain components.Inspect gears and drive shafts for damage. Replace as necessary.
Vehicle body cracks easily.Thin body shell material.Reinforce the inside of the body shell with tape (e.g., Gorilla tape) in high-stress areas, especially around body mount holes.
Bouncy ride, poor handling.Stock friction shocks.Consider upgrading to oil-filled shock absorbers for improved performance.

Specifications

FeatureDetail
BrandHAIBOXING
Model Number18859
Scale1:18
Drive System4WD (Four-Wheel Drive)
MotorRC380 Brushed Motor
Maximum SpeedUp to 36 KM/H (22.37 MPH)
Control Frequency2.4 GHz
Control RangeApprox. 280 feet
Battery Type7.4V 850mAh Lithium-Ion (Li-Po)
Electronic SystemWaterproof ESC/Receiver Combo
SuspensionIndependent Suspension with Friction Shocks
MaterialsNylon, Plastic, Steel
Dimensions (L x W x H)9 x 7 x 5.8 inches
Weight2 Pounds
Recommended Age8 years and up

Warranty and Support

Warranty Information

This product comes with a 30-day money-back guarantee and a spare parts warranty. For any quality problems not caused by human error, please contact customer service.

Customer Support

If you encounter any issues or have questions regarding your HAIBOXING RC Monster Truck, please contact our customer service team via email. We are committed to providing prompt and positive assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.