iKiKin P10 OBD2 Car Head-Up Display User Manual

Introduction

The iKiKin P10 OBD2 Car Head-Up Display (HUD) is designed to project essential driving information directly onto your windshield, allowing you to monitor vehicle data without diverting your attention from the road. This device connects to your vehicle's On-Board Diagnostics (OBD2) port to display real-time data such as speed, engine RPM, water temperature, voltage, fuel consumption, driving distance, and driving time. It also features error code detection and various alarm functions to enhance driving safety.

Product Contents

Please verify that all items listed below are included in your package:

• HUD Unit (iKiKin P10 Display)
• OBD Cable
• Non-slip Mat
• User Manual (this document)

Image: Contents of the iKiKin P10 package, showing the HUD unit, OBD cable, non-slip mat, and user manual.

Compatibility

The iKiKin P10 HUD is designed for vehicles equipped with an OBD2 and EUOBD interface. Please check your car's compatibility before installation.

Applicable Vehicles:

• American gasoline cars produced after 2004 that comply with the OBD2 protocol.
• Gasoline cars from other regions produced after 2008 that comply with the OBD2 protocol.

Incompatible Vehicles (Common Examples):

• American Cars: Dodge, JEEP, SAIL, Chrysler models produced before or in 2004.
• All French and Italian car models.
• Japan Cars: Suzuki, Mazda6, Infiniti (QX50, Q50, Q501), Toyota Avanza 2013, Lexus (IS250, EX250, ES300h), Honda (Jazz, CRV), and cars produced before 2008.
• Some South Korean models: KIA and Hyundai (e.g., Hyundai Sonata 2013, Kia Soul PS 2017).
• Oil-electric hybrid vehicles, diesel cars, pickup trucks, RVs, and cars with modified computer systems.

Setup and Installation

The iKiKin P10 HUD is designed for simple plug-and-play installation in compatible vehicles.

1. Locate the OBD2 Port: Identify your vehicle's OBD2 diagnostic port, typically located under the dashboard on the driver's side.
2. Connect the HUD: Plug the provided OBD cable into the vehicle's OBD2 port and then connect the other end to the HUD unit.
3. Position the HUD: Place the HUD unit on your dashboard using the non-slip mat. Ensure it is positioned where the display is clearly visible without obstructing your view of the road.
4. Start the Vehicle: Once connected, start your vehicle. The HUD should power on automatically and begin displaying data. If an error occurs, try unplugging and re-plugging the connector with the engine running.

Image: Diagram illustrating the simple plug-and-play installation process for the iKiKin P10 HUD.

Image: The iKiKin P10 HUD unit positioned on a car dashboard, displaying speed and other vehicle data.

Operating Instructions

The iKiKin P10 HUD features a TFT LCD multi-color display that presents various driving data and offers multiple user interface (UI) options.

Data Displayed:

• Speed (km/h or mph)
• Engine RPM (Revolutions Per Minute)
• Water Temperature
• Voltage
• Fuel Consumption
• Driving Distance
• Driving Time

User Interface (UI) Modes:

The P10 HUD offers 7 different UI modes, allowing you to customize the displayed information. You can choose to display a single data type (e.g., speed) or multiple data types simultaneously (e.g., speed, voltage, and water temperature). Refer to the device's setting button (located on the side) to cycle through and select your preferred UI mode.

Image: Examples of the multiple display interfaces available on the iKiKin P10 HUD, showing various data combinations.

Image: A close-up view of the iKiKin P10 HUD displaying different user interface options, including speed and RPM.

Display Visibility:

The TFT LCD screen provides clear visibility in various lighting conditions, from bright daylight to dark nights, thanks to its automatic backlight adjustment. The display is designed to minimize reflection.

Image: The iKiKin P10 HUD display shown in various environmental conditions: bright sun, rain, and night, demonstrating its clear visibility.

Maintenance

To ensure the longevity and optimal performance of your iKiKin P10 HUD, follow these maintenance guidelines:

• Cleaning: Gently wipe the display screen and unit exterior with a soft, dry, or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners.
• Storage: If storing the device for an extended period, disconnect it from the OBD2 port and store it in a cool, dry place away from direct sunlight.
• Cable Care: Ensure the OBD cable is not pinched or excessively bent, as this can damage the internal wiring.

Troubleshooting

This section addresses common issues you might encounter with your iKiKin P10 HUD.

Error Alarms:

The HUD is equipped with various alarm functions to alert you to potential vehicle issues:

• Low Voltage Alarm: Indicates that your vehicle's battery voltage is below a safe threshold. Check your vehicle's charging system.
• High Water Temperature Alarm: Warns of engine overheating. Pull over safely and check your coolant levels and engine temperature.
• Over Speed Alarm: Alerts you if you exceed a preset speed limit.
• Engine Fault Code Alarm: Notifies you of a detected engine fault. The HUD can also help eliminate the fault code after the issue is resolved.

Common Issues and Solutions:

• HUD Does Not Power On:
  • Ensure the OBD cable is securely connected to both the HUD and the vehicle's OBD2 port.
  • Verify your vehicle's compatibility with the OBD2 protocol (refer to the Compatibility section).
  • Start the vehicle's engine. The HUD typically powers on with the ignition.
• "This vehicle not compatible with OBDII" Error:
  • With the engine running, unplug the OBD connector from the vehicle and then plug it back in. This can sometimes resolve initial communication issues.
  • Confirm your vehicle is indeed OBD2 compatible as per the Compatibility section.
• Inaccurate Speed Reading:
  • The HUD's speed reading should generally be accurate. If discrepancies are noted, especially at higher speeds, refer to the device's settings for potential calibration options (consult the full user manual if provided separately).
• Display Rebooting While Driving:
  • Check the OBD cable connection for looseness.
  • Ensure the vehicle's power supply to the OBD port is stable.

Specifications

Key technical specifications for the iKiKin P10 HUD:

Image: Detailed view of the iKiKin P10 HUD, showing its dimensions, setting button, light sensor hole, and OBD interface.

Warranty and Support

For warranty information, technical support, or further assistance, please refer to the official iKiKin website or contact the seller directly. Keep your purchase receipt as proof of purchase.