Introduction
This manual provides essential information for the iRobot Roomba Authentic Replacement Parts Kit, designed to maintain the cleaning performance of your Roomba e, i, and j Series Robot Vacuums. This kit includes 3 High-Efficiency Filters, 3 Edge-Sweeping Brushes, and 1 Set of Multi-Surface Rubber Brushes.
Image: Overview of the iRobot Roomba Authentic Replacement Parts Kit, showing three high-efficiency filters, three green edge-sweeping brushes, and one set of two green multi-surface rubber brushes.
Compatibility
This replenishment kit is compatible with iRobot Roomba e, i, and j Series Robot Vacuums only. Ensure your Roomba model is within these series for proper fit and function.
Maintenance and Part Replacement
Regular maintenance of your Roomba's components is crucial for optimal cleaning performance. The following sections detail how to replace the filters, edge-sweeping brushes, and multi-surface rubber brushes.
Replacing Multi-Surface Rubber Brushes
Open the Cleaning Head Module door: Push on the green tab located on the right side of the multi-surface brushes to open the module door.
Image: Step 1 and 2 for brush replacement. A diagram illustrates opening the cleaning head module by pushing a green tab and then removing the brushes, with arrows indicating the direction of removal.
Remove and Clean Brushes: Remove the old brushes from the robot. Ensure any hair and debris are thoroughly removed from the square and hex pegs of the multi-surface brushes.
Clear Debris and Insert Bearings: Clear any debris on and under the gray bearings. Insert the bearings onto the new multi-surface brushes.
Image: Step 3 and 4 for brush replacement. A diagram shows two multi-surface brushes with green bearings, illustrating the process of clearing debris and inserting the bearings.
Ensure Clear Vacuum Path and Install New Brushes: Verify that the vacuum path is clear of obstructions. Match the shape of the new multi-surface brushes' pegs with the corresponding shapes on the Cleaning Head Module and insert them securely.
Image: Step 5 and 6 for brush replacement. A diagram shows the underside of the Roomba with the cleaning head module open, illustrating how to align and insert the new multi-surface brushes.
Replacing Edge-Sweeping Brushes
The edge-sweeping brush is held in place by a screw. Use a small screwdriver to remove the screw, then remove the old brush. Align the new edge-sweeping brush and secure it with the screw. Ensure the brush spins freely after installation.
Replacing High-Efficiency Filters
To replace the filter, open the dust bin door on your Roomba. Remove the old filter by pulling it out. Insert a new high-efficiency filter into the designated slot, ensuring it is seated firmly. Close the dust bin door.
Troubleshooting
If your Roomba's cleaning performance declines after replacing parts, consider the following:
- Reduced Suction: Ensure the new filter is correctly installed and the dust bin is empty. Check for any blockages in the vacuum path or brushes.
- Unusual Noises: Verify that the multi-surface brushes are properly seated and free of tangled hair or debris. Check the edge-sweeping brush for obstructions.
- Poor Edge Cleaning: Confirm the edge-sweeping brush is securely attached and not damaged.
For persistent issues, refer to your Roomba robot vacuum's main user manual or contact iRobot customer support.
Specifications
| Brand | iRobot |
| Model Name | Roomba i Series (Replenishment Kit) |
| Model Number | 4639168 |
| Included Components | 3 High-Efficiency Filters, 3 Edge-Sweeping Brushes, 1 Set of Dual Multi-Surface Rubber Brushes |
| Compatible Devices | Roomba e, i, and j Series Robot Vacuums |
| Item Weight | 7 ounces |
| Product Dimensions | 4.51"L x 2"W x 7.13"H |
| UPC | 885155018502 |
Warranty and Support
This iRobot Roomba Authentic Replacement Parts Kit comes with a 1-year limited warranty.
For warranty claims, technical support, or further assistance, please contact iRobot customer service. It is important to note that iRobot does not certify the quality or authenticity of products purchased from non-authorized resellers and will not cover claims, provide service, or offer replacements for products purchased from these sellers.
Image: Important notice from iRobot regarding purchasing from authorized resellers to ensure product authenticity and warranty coverage.
You can find more information and support on the official iRobot Store on Amazon.
