Nulaxy KM13 Bluetooth Keyboard Instruction Manual

1. Product Overview

The Nulaxy KM13 Bluetooth Keyboard is a wireless input device designed for use with various operating systems, including iOS, Android, and Windows. It features a space-saving sliding stand capable of holding devices between 4.0 and 10.5 inches. The keyboard offers a comfortable typing experience and operates wirelessly up to 10 meters.

Key Features:

Space-Saving Sliding Stand: Integrated stand supports devices from 4.0 to 10.5 inches.
Universal Compatibility: Works with iOS, Android, and Windows devices.
Comfortable Keys: Designed for quiet and effortless typing.
Wireless Connectivity: Bluetooth connection with an operating distance of up to 10 meters.
Energy Saving: Automatic sleep mode after 10 minutes of inactivity to conserve battery life.

Nulaxy KM13 Bluetooth Keyboard with an iPad in its sliding stand — Figure 1.1: The Nulaxy KM13 Bluetooth Keyboard with an iPad positioned in its integrated sliding stand, showcasing the compact design and device support.

Diagram showing wide compatibility of Nulaxy KM13 keyboard with tablet, iPhone, PC, and laptop icons — Figure 1.2: A visual representation of the Nulaxy KM13 keyboard's broad compatibility, illustrating its connection capabilities with tablets, iPhones, PCs, and laptops.

2. Setup and Pairing

Follow these steps to set up and pair your Nulaxy KM13 Bluetooth Keyboard with your device.

2.1 Battery Installation

Locate the battery compartment on the underside of the keyboard.
Open the battery cover.
Insert two (2) AAA battery cells, ensuring correct polarity. (Batteries are not included)
Close the battery cover securely.

Underside of Nulaxy KM13 keyboard showing battery compartment and non-slip rubber strips — Figure 2.1: The bottom view of the Nulaxy KM13 keyboard, highlighting the battery compartment and the non-slip rubber strips for stability.

2.2 Bluetooth Pairing

Slide the power switch on the keyboard from OFF to ON.
Press the Fn + C keys simultaneously to put the keyboard into Bluetooth pairing mode. The Bluetooth indicator light will begin to flash.
On your device (tablet, phone, or computer), navigate to the Bluetooth settings.
Search for available Bluetooth devices. The keyboard will appear as "Bluetooth Keyboard" or a similar identifier.
Select the keyboard from the list to connect.
Once the connection is successful, the Bluetooth indicator light on the keyboard will stop flashing.

Note: The keyboard will automatically connect to the last paired device when powered on, provided Bluetooth is enabled on the device.

3. Operating Instructions

3.1 Using the Sliding Stand

The integrated sliding stand can be extended to hold your device. Gently pull the stand out from the top edge of the keyboard until it locks into position. Place your tablet or phone into the stand. Ensure your device is placed horizontally for optimal stability, especially for tablets.

Three-step diagram showing how to extend the sliding stand on the Nulaxy KM13 keyboard — Figure 3.1: A step-by-step guide illustrating the extension mechanism of the keyboard's sliding stand.

Nulaxy KM13 keyboard with various devices (phone, tablet) in its stand, demonstrating compatibility — Figure 3.2: The Nulaxy KM13 keyboard supporting multiple devices, including a smartphone and a tablet, within its sliding stand.

3.2 Operating System Mode Switching

The keyboard supports different operating system layouts. Use the following key combinations to switch modes:

Android: Press Fn + W
Windows: Press Fn + E
iOS: Press Fn + Q

3.3 Power Saving Mode

To conserve battery life, the keyboard will automatically enter sleep mode after 10 minutes of inactivity. To reactivate the keyboard, press any key and wait for 2-3 seconds. The keyboard will automatically reconnect to the last paired device.

4. Maintenance

4.1 Cleaning

Use a soft, dry cloth to wipe the surface of the keyboard.
For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution. Avoid excessive moisture.
Do not use abrasive cleaners, solvents, or aerosol sprays directly on the keyboard.

4.2 Battery Replacement

When the keyboard's performance degrades or it fails to power on, replace the AAA batteries. Refer to Section 2.1 for battery installation instructions.

4.3 Storage

When not in use for extended periods, slide the power switch to the OFF position to prevent battery drain. Store the keyboard in a cool, dry place away from direct sunlight and extreme temperatures.

5. Troubleshooting

If you encounter issues with your Nulaxy KM13 keyboard, refer to the following common problems and solutions.

Problem	Possible Cause	Solution
Keyboard does not power on.	Low or dead batteries; Power switch is OFF.	Replace AAA batteries. Ensure the power switch is in the ON position.
Keyboard does not connect via Bluetooth.	Not in pairing mode; Device Bluetooth is off; Out of range.	Press Fn + C to enter pairing mode. Ensure Bluetooth is enabled on your device. Move the keyboard closer to your device (within 10 meters).
Keys are unresponsive or typing is delayed.	Keyboard in sleep mode; Low battery; Interference.	Press any key to wake the keyboard. Replace batteries. Reduce interference by moving away from other wireless devices.
Specific keys (e.g., 'I' key) cause unexpected behavior (e.g., language change on Samsung devices).	Software conflict or keyboard shortcut in device's operating system.	This can occur on some Android devices (e.g., Samsung) where Shift+Spacebar is a language shortcut. Consider installing an alternative keyboard app like Google Keyboard (GBoard) from your device's app store, which may resolve the conflict.
Keyboard disconnects frequently.	Low battery; Device sleep settings; Environmental interference.	Replace batteries. Check your device's power saving settings to ensure Bluetooth is not being turned off. Minimize other wireless signals nearby.

6. Specifications

Feature	Detail
Operation Scope	<10 meters
Operating Current	<2.5mA
Working Voltage	3.0V
Key Strength	60 ± 10g
Standby Current	<0.3mA
Key Life	Approximately 3 million strokes
Power Source	2 x AAA Batteries (not included)
Dimensions (L x W x H)	11.2 x 5.0 x 0.6 inches (approximate)
Item Weight	13.7 ounces
Material	Acrylonitrile Butadiene Styrene (ABS)
Color	Grey

Diagram showing dimensions of Nulaxy KM13 keyboard and locations of Fn, Capslock, and Power indicator lights — Figure 6.1: Detailed dimensions of the Nulaxy KM13 keyboard and the positions of its indicator lights for Function (Fn), Caps Lock, and Power.

7. Warranty and Support

Nulaxy products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Nulaxy website. Customer support is available to assist with product inquiries, troubleshooting, and replacement parts if necessary.

Nulaxy KM13