1. Introduction
Thank you for choosing the Beurer GS10 Digital Glass Scale. This manual provides important information regarding the safe and proper use, setup, and maintenance of your new scale. Please read these instructions carefully before first use and keep them for future reference.
Product Features:
- Easy-to-read LCD display
- Flat design height: only 1.9 cm
- Quick start technology
- Automatic switch-off function
- Overload indicator
- Maximum weight capacity: 180 kg
Safety Information:
- Place the scale on a firm, level surface to ensure accurate measurements. Avoid carpets or soft flooring.
- Do not use the scale in areas with high humidity, such as directly next to a shower or bathtub.
- The scale is designed for personal weight measurement only.
- Clean the scale with a damp cloth; do not use abrasive cleaning agents.
- Keep batteries out of reach of children.
2. Setup
2.1 Battery Installation
Your Beurer GS10 scale requires 1 Lithium Metal battery (included). Locate the battery compartment on the underside of the scale. Open the compartment cover, insert the battery according to the polarity markings (+/-), and close the cover securely.
2.2 Initial Placement and Calibration
Place the scale on a hard, flat, and stable surface. For the first use, or if the scale has been moved, it is recommended to perform an initial calibration:
- Gently step onto the scale.
- The display will show a reading, then turn off.
- The scale is now calibrated and ready for use.


3. Operating the Scale
3.1 Taking a Measurement
The Beurer GS10 scale features quick start technology:
- Step onto the scale barefoot and stand still.
- Your weight will be displayed on the LCD screen.
- The scale will automatically switch off after a few seconds to conserve battery life.

3.2 Weight Unit Conversion (if applicable)
If your scale supports multiple units (e.g., kg, lb, st), there is typically a button on the underside of the scale to switch between them. Refer to the markings near the button for specific instructions.
4. Maintenance
4.1 Cleaning
Clean the scale regularly with a slightly damp cloth. Do not use abrasive cleaning agents or immerse the scale in water. Ensure the scale is dry before storage or next use.
4.2 Storage
Due to its flat design (1.9 cm height), the Beurer GS10 scale can be easily stored under furniture or in narrow spaces. Store in a dry place at room temperature.
5. Troubleshooting
- Display shows "Lo": The battery is low. Replace the battery as described in Section 2.1.
- Display shows "Err" or "O-Ld": The scale is overloaded. The maximum weight capacity is 180 kg. Step off the scale immediately.
- Inaccurate readings:
- Ensure the scale is on a hard, flat, and stable surface.
- Perform initial calibration (step on, step off) if the scale has been moved.
- Ensure you are standing still during measurement.
- Scale does not turn on: Check battery installation and ensure the battery is not depleted.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | GS10 (756.21) |
| Brand | Beurer |
| Maximum Weight Capacity | 180 kg |
| Readout Accuracy | +/- 100 g |
| Display Type | LCD |
| Special Features | Backlit Display |
| Material | Glass |
| Product Dimensions | 30 x 1.9 x 30 cm |
| Item Weight | 1.52 Grams |
| Batteries | 1 Lithium Metal battery (included) |
| Color | Black |

7. Warranty and Support
7.1 Warranty Information
Egyserv Company provides a 1-Year service warranty on all Beurer products, with the exception of Blood Pressure Monitors which have a 3-year warranty. To activate your warranty, please visit the Egyserv website and upload your invoice on the activation page:
7.2 Contact Information
For support or inquiries, you may contact Egyserv at their branch locations:
- Alexandria Branch:
40 Tout ankh amoun St, Smouha, second floor
Mobile Number: 01000777452 - Cairo Branch:
26 Mohamed Mekled St, Nasr City, 8th district, first floor
Mobile Number: 01000777453