WMF 0413180012

Download PDF
Contents

WMF Kitchen Minis Glass Kettle Vario 0413180012 User Manual

Model: 0413180012

Introduction

This manual provides essential instructions for the safe and efficient operation, maintenance, and care of your WMF Kitchen Minis Glass Kettle Vario 0413180012. Please read this manual thoroughly before first use and retain it for future reference.

WMF Kitchen Minis Glass Kettle Vario

Figure 1: WMF Kitchen Minis Glass Kettle Vario, showcasing its sleek design and integrated tea infuser.

Important Safety Instructions

  • Read all instructions before using the appliance.
  • Do not touch hot surfaces. Use handles or knobs.
  • To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or appliance in water or other liquid.
  • Close supervision is necessary when any appliance is used by or near children.
  • Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
  • Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
  • The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
  • Do not use outdoors.
  • Do not let cord hang over edge of table or counter, or touch hot surfaces.
  • Do not place on or near a hot gas or electric burner, or in a heated oven.
  • Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
  • Do not use appliance for other than intended use.
  • Extreme caution must be used when moving an appliance containing hot water.
  • This appliance is designed for 220 Volts and is not suitable for use in regions with 110-120 Volt electrical systems, such as the USA.

Setup

  1. Unpacking: Carefully remove all packaging materials and promotional labels from your kettle. Ensure all components are present: kettle, power base, and tea infuser.
  2. First Use Cleaning: Before initial use, fill the kettle with fresh water to the MAX fill line. Boil the water, then discard it. Repeat this process two to three times to remove any manufacturing residues. Wipe the exterior with a damp cloth.
  3. Placement: Place the power base on a dry, flat, stable, and heat-resistant surface. Ensure the power cord is not dangling or in contact with hot surfaces.
Exploded view of WMF Kitchen Minis Glass Kettle components

Figure 2: Exploded view of the kettle, showing the main body, lid, tea infuser, and power base.

Operating Instructions

  1. Filling the Kettle: Open the lid and fill the kettle with the desired amount of fresh, cold water. Do not fill below the MIN mark or above the MAX mark (1000ml). The side of the kettle features clear measurement markings for precise filling.
  2. Placing on Power Base: Position the kettle securely onto its power base.
  3. Selecting Temperature: The kettle offers five preset temperature settings for various beverages. Select your desired temperature by pressing the corresponding button on the base:
    • 175°F (80°C): Ideal for Green and White Teas.
    • 195°F (90°C): Recommended for Oolong Tea.
    • 200°F (93°C): Suitable for French Press Coffee.
    • 212°F (100°C): Perfect for Black Tea, Herbal Tea, or general boiling.
  4. Starting the Heating Process: After selecting the temperature, press the 'Start' button. The indicator light for the selected temperature will illuminate, and the kettle will begin heating the water.
  5. Using the Tea Infuser: For loose leaf tea, remove the small lid from the top of the kettle and insert the tea infuser. Add your desired amount of loose leaf tea into the infuser. Replace the small lid. Once the water reaches the selected temperature, the tea will begin to steep.
  6. Keep Warm Function: The kettle features a keep warm function. After reaching the target temperature, the kettle can maintain the water temperature for a period. Refer to the specific button on the base for activating this feature.
  7. Automatic Shut-off: The kettle will automatically switch off once the water reaches the selected temperature or if it boils dry.
WMF Glass Kettle boiling water with blue LED illumination

Figure 3: The kettle in operation, showing water boiling and the blue LED illumination at the base.

WMF Glass Kettle with tea infuser, loose tea, and mint leaves

Figure 4: The kettle with its tea infuser, alongside loose tea leaves and fresh mint, illustrating its tea preparation capabilities.

Maintenance

Regular cleaning and maintenance will prolong the life of your WMF Kitchen Minis Glass Kettle Vario.

  1. Exterior Cleaning: Wipe the exterior of the kettle and power base with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
  2. Interior Cleaning: The kettle is made of glass and stainless steel. For general cleaning, rinse the interior with water. For stubborn stains, use a mild dish soap and a soft sponge. Rinse thoroughly.
  3. Tea Infuser Cleaning: The tea infuser can be easily removed for cleaning. Rinse it under running water to remove tea leaves. For thorough cleaning, use a small brush and mild soap.
  4. Descaling: Over time, mineral deposits (limescale) may build up inside the kettle, especially in hard water areas. To descale:
    • Fill the kettle with a mixture of water and white vinegar (1:1 ratio) or a commercial descaling solution.
    • Boil the mixture.
    • Let it stand for 15-30 minutes (or as per descaler instructions).
    • Discard the mixture and rinse the kettle thoroughly several times with fresh water.
Close-up of WMF Glass Kettle lid open, showing the removable filter

Figure 5: The kettle's lid open, revealing the removable filter for easy cleaning and tea preparation.

Troubleshooting

  • Kettle does not heat: Ensure the kettle is properly seated on the power base and the power cord is securely plugged into a working 220V outlet. Check if the correct temperature setting and 'Start' button have been pressed.
  • Water takes too long to boil: Limescale buildup can affect heating efficiency. Perform descaling as described in the Maintenance section.
  • Kettle leaks: Check if the lid is properly closed. Ensure the kettle is not overfilled beyond the MAX line. If leaking persists, discontinue use and contact customer support.
  • Unusual odors or tastes: Ensure the kettle has been thoroughly cleaned before first use. If odors persist, try boiling water with a slice of lemon or a teaspoon of baking soda, then rinse thoroughly.

Specifications

BrandWMF
Model Name0413180012
MaterialGlass, Stainless Steel
ColorClear and Silver
Capacity1 Liter (approx. 33.8 fl oz)
Cable Length1 Meter
Product Care InstructionsHand wash, Wipe clean

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official WMF website. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.