Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Relaxdays Retro Nightstand with Drawer, Model 10022742. Please read these instructions carefully before assembly and use to ensure safe and proper functionality.
Image: The Relaxdays Retro Nightstand with Drawer, featuring a wood effect finish and metal legs, positioned next to a chair in a modern living space.
Safety Warnings
Important: Please observe the following safety guidelines to prevent injury or damage to the product.
- Do not exceed the maximum weight capacity of 25 kg (55 lbs) on the nightstand.
- Ensure the furniture is properly assembled and stable before use.
- Keep small parts away from children during assembly to prevent choking hazards.
- Avoid placing hot items directly on the surface without protection.
- Do not stand or climb on the nightstand.
Package Contents
Before beginning assembly, verify that all parts are present and undamaged. The package should contain:
- 1 x Nightstand (disassembled components)
- 1 x Assembly Instructions Manual (this document)
- All necessary hardware for assembly (screws, dowels, etc.)
Note: Decorative items shown in product images are not included.
Image: The main body of the nightstand and the drawer component shown separately, illustrating the modular design.
Setup and Assembly
Assembly is required for this nightstand. Please follow the included assembly instructions carefully. A detailed guide is provided with the product to ensure correct and stable construction.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Identify Parts: Refer to the parts list in the separate assembly guide to identify each component.
- Assemble Frame: Follow the step-by-step diagrams to connect the main frame pieces. Ensure all connections are secure.
- Install Drawer Rails: Attach the drawer rails to the inside of the nightstand frame according to the instructions.
- Assemble Drawer: Construct the drawer box and attach the drawer front and handle.
- Insert Drawer: Slide the assembled drawer into the installed rails.
- Attach Legs: Securely fasten the metal legs to the bottom of the nightstand. Ensure they are tightened evenly for stability.
- Final Check: Once assembled, gently shake the nightstand to ensure it is stable and all connections are tight.
Image: A close-up view of the black metal hairpin legs securely attached to the base of the nightstand, highlighting the sturdy connection.
Operating Instructions
The Relaxdays Retro Nightstand is designed for convenient storage and display in various rooms.
- Storage: Utilize the open compartment for easy access items like books, magazines, or decorative pieces.
- Drawer Use: The integrated drawer provides concealed storage for personal items such as underwear, socks, or other accessories. Pull the handle gently to open and push to close.
- Placement: This compact nightstand is ideal for small spaces, bedrooms, living rooms, or hallways as an accent table or telephone stand.
Image: A person reaching to open the drawer of the nightstand, demonstrating its functional storage.
Image: A hand placing books into the open storage compartment of the nightstand, illustrating its use for accessible items.
Maintenance
To ensure the longevity and appearance of your nightstand, follow these maintenance tips:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Spills: Clean up spills immediately to prevent staining or water damage.
- Stability Check: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration of the wood effect finish.
- Weight Distribution: Distribute weight evenly across the top surface and within the drawer to maintain stability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Nightstand is wobbly. | Loose screws or uneven floor. | Check and tighten all assembly screws. Ensure the nightstand is on a level surface; use furniture pads if needed. |
| Drawer does not slide smoothly. | Drawer rails misaligned or debris in tracks. | Verify drawer rails are correctly installed and aligned. Clean tracks of any dust or obstructions. |
| Surface scratches or marks. | Sharp objects or abrasive cleaning. | Use coasters for drinks and protective mats for decorative items. Clean with soft cloths only. Minor scratches may be touched up with furniture repair pens (not included). |
Specifications
| Model Number: | 10022742 |
| Brand: | Relaxdays |
| Overall Dimensions (H x W x D): | 60 x 40 x 35 cm (23.6 x 15.7 x 13.8 inches) |
| Weight: | Approx. 10 kg (22 lbs) |
| Maximum Load Capacity: | 25 kg (55 lbs) |
| Material: | MDF (Engineered Wood), Metal |
| Color: | Wood Effect (Cabinet), Grey (Drawer) |
| Open Compartment Dimensions (H x W x D): | Approx. 15 x 37 x 35 cm (5.9 x 14.6 x 13.8 inches) |
| Drawer Interior Dimensions (H x W x D): | Approx. 13 x 31.5 x 29 cm (5.1 x 12.4 x 11.4 inches) |
| Ground Clearance: | Approx. 25 cm (9.8 inches) |
Image: A technical diagram illustrating the overall dimensions (height, width, depth) of the nightstand and its components.
Warranty and Support
For warranty information or customer support, please refer to the retailer's policy where the product was purchased or visit the official Relaxdays website. Keep your proof of purchase for any warranty claims.
Contact Information: Please refer to the contact details provided on your purchase receipt or the Relaxdays official website for assistance.
