Product Overview
The Brita Hard-Sided Plastic Premium Filtering Water Bottle is designed to provide healthier, great-tasting tap water on the go. This BPA-free, reusable bottle features an activated carbon block filter that reduces chlorine taste and odor, as well as particulates, as you drink. It offers a convenient and sustainable alternative to single-use plastic water bottles.
Figure 1: Brita Hard-Sided Plastic Premium Filtering Water Bottle (26 oz, Night Sky) with filter.
Key Features:
- BPA-Free Construction: Ensures safe drinking.
- Activated Carbon Block Filter: Reduces chlorine taste and odor, and particulates.
- Sustainable Choice: Each filter can replace up to 300 standard 16.9-oz. single-use plastic water bottles.
- Convenient Design: Features an easy-sip straw, built-in carrying loop, one-handed push-button lid, and leakproof design.
- Easy Cleaning: Top rack dishwasher-safe for hassle-free maintenance.
Figure 2: Premium features of the Brita Filtering Water Bottle.
Setup and First Use
Before using your Brita Filtering Water Bottle for the first time, follow these steps to ensure optimal performance and water quality.
- Hand-wash Bottle Components: Hand-wash the bottle, cap, and straw with mild dish soap. Rinse all components thoroughly with water.
- Rinse Filter: IMPORTANT: Rinse the filter under running water for 15 seconds. This helps remove any loose carbon particles from the filter.
- Insert Filter into Straw: Firmly insert the filter (white tip upward) into the top of the straw until it is flush with the top of the straw.
- Reattach Straw: Reattach the straw by aligning it into the lid and twisting to the right until secure.
- Fill Bottle: Fill the bottle with tap water. The filter will activate as you drink.
Figure 3: Components of the Brita Filtering Water Bottle.
Operating Instructions
Using your Brita Filtering Water Bottle is straightforward. The integrated filter ensures that every sip of water is filtered for improved taste and reduced impurities.
- Open Lid: Press the push-button on the lid to release and open the cap, revealing the easy-sip straw.
- Drink Water: Sip directly from the straw. The water will pass through the activated carbon filter as you drink, providing cleaner, great-tasting water.
- Close Lid: After drinking, firmly press the cap back down until it clicks into place to ensure a leakproof seal.
- Carrying: Utilize the built-in carrying loop for easy portability.
Figure 4: Enjoying filtered water from the Brita bottle.
Maintenance and Care
Proper maintenance ensures the longevity of your Brita Filtering Water Bottle and consistent water quality.
Cleaning the Bottle:
- Dishwasher Safe: The bottle (excluding the filter) is top rack dishwasher-safe for convenient cleaning.
- Hand-washing: For best results or if a dishwasher is not available, hand-wash the bottle, cap, and straw with mild dish soap and warm water. Rinse thoroughly.
- Do NOT Wash Filter: The activated carbon filter should not be washed with soap or in a dishwasher. Only rinse it with water as part of the setup process.
- Drying: Ensure all components are completely dry before reassembling or storing to prevent mold or mildew.
Filter Replacement:
The Brita water bottle filter should be changed regularly to maintain optimal performance and water taste.
- Replacement Schedule: Replace your Brita water bottle filter every 40 gallons (approximately 151 liters) or about every two months, whichever comes first.
- Purchasing New Filters: Use only genuine Brita water bottle replacement filters. These are widely available from authorized retailers.
- Installation: Follow the "Setup and First Use" instructions for installing a new filter.
Figure 5: The Brita filter improves water quality by reducing chlorine and other impurities.
Troubleshooting
If you encounter any issues with your Brita Filtering Water Bottle, consider the following common solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Water tastes or smells unusual. | Filter needs replacement. Replace filter every 2 months or 40 gallons. Ensure filter was rinsed for 15 seconds before first use. |
| Difficulty sipping water. | Straw or filter may be clogged. Disassemble and clean straw. Ensure filter is correctly inserted and not blocked. |
| Bottle is leaking. | Lid not properly closed. Ensure cap is firmly pressed down until it clicks. Check for damage to the lid or seals. |
| Water flow is slow. | Filter may be nearing end of life or is clogged. Replace filter. Ensure proper rinsing of new filter. |
If problems persist, refer to the official Brita support resources or contact customer service.
Product Specifications
| Feature | Detail |
|---|---|
| Brand | BRITA |
| Model Name | Premium Filtering Bottle Hard Sided Hard Plastic |
| Model Number | BB10/BB06 |
| Capacity | 26 Ounces (769 Milliliters) |
| Material | Plastic (BPA-Free) |
| Color | Night Sky |
| Product Dimensions | 3.03"W x 10.63"H |
| Item Weight | 7.7 ounces (0.48 Pounds) |
| Filter Type | Activated Carbon Block |
| Filter Lifespan | 40 Gallons or 2 Months |
| Care Instructions | Top Rack Dishwasher Safe (bottle only) |
| First Available | December 1, 2018 |
| UPC | 060258365214 |
Warranty and Support
For detailed warranty information, product registration, or to contact customer support, please visit the official Brita website or refer to the user guide included with your product.
- Official User Guide (PDF): Download User Guide
- Brita Website: Visit www.brita.com for more information and support.
- Customer Service: Contact Brita customer service for assistance with product inquiries, troubleshooting, or warranty claims.
Note: Information regarding specific warranty terms and conditions may vary and should be confirmed with the manufacturer.
Important Note on Videos
Based on the provided product data, there are no official product videos from the 'Seller' available for embedding in this manual. All available videos are from 'Influencer' or 'Customer' creators and thus do not meet the criteria for inclusion as official product videos.