Micnova GPS-N Plus (8541746177)

Micnova GPS-N Plus High-Precision Camera GPS Receiver User Manual

Model: GPS-N Plus (8541746177)

Brand: Micnova

Introduction

The Micnova GPS-N Plus is a compact and lightweight high-precision GPS receiver designed for Nikon DSLR cameras. It automatically geotags your photos with latitude, longitude, altitude, and time information, embedding this data directly into the EXIF metadata of your images. This device enhances your photography by providing precise location data for every shot, making it an ideal companion for travel and outdoor photography.

Micnova GPS-N Plus receiver and a Nikon camera

Image: The Micnova GPS-N Plus receiver shown alongside a Nikon DSLR camera, illustrating its compact size and intended use.

Micnova GPS-N Plus mounted on a Nikon camera

Image: A Micnova GPS-N Plus receiver mounted on the hot shoe of a Nikon camera, demonstrating its integration for geotagging.

What's in the Box

The Micnova GPS-N Plus package includes the following components:

Contents of the Micnova GPS-N Plus package

Image: All components included in the Micnova GPS-N Plus package: the GPS unit, N1 and N3 cables, a hanging strap, and a wired remote controller.

Compatibility

The Micnova GPS-N Plus is compatible with a wide range of Nikon DSLR cameras. It comes with two types of connecting cables, N1 and N3, to ensure broad compatibility.

Compatibility chart for Micnova GPS-N Plus with Nikon cameras

Image: A visual guide showing the N1 and N3 cables and the Nikon camera models compatible with each cable type for the Micnova GPS-N Plus.

N1 Cable Suits For:

N3 Cable Suits For:

Setup

Follow these steps to set up your Micnova GPS-N Plus with your Nikon camera:

  1. Select the Correct Cable: Identify whether your camera requires the N1 or N3 adapter cable based on the compatibility list above.
  2. Connect the GPS Unit: Connect the selected N1 or N3 cable to the Micnova GPS-N Plus unit.
  3. Connect to Camera: Plug the other end of the cable into the appropriate port on your Nikon camera. This port is typically located on the side of the camera body.
  4. Mounting (Optional): You can mount the GPS unit on your camera's hot shoe or use the included belt clip/hanging strap for alternative attachment.

Operating Instructions

Once connected, the GPS-N Plus is designed for user-friendly operation:

  1. Power On: Turn on your Nikon camera. The GPS unit will power on automatically as it draws power directly from the camera.
  2. Satellite Acquisition: The GPS unit will begin searching for satellite signals. A flashing green indicator light on the unit confirms it is acquiring a signal.
  3. GPS Lock: Once a stable GPS signal is acquired, the indicator light will turn solid green. This signifies that the unit has successfully determined its location and is ready for geotagging.
  4. Take Photos: You can now take photos by pressing the shutter release button on your camera body or by using the bonus remote release cable. The GPS coordinates will be automatically written to the EXIF data of each photo.
  5. View Geotag Information:
    • On Camera: View the geotag information on the "GPS Data" page when reviewing images on your camera's LCD.
    • On PC: Geotag information can be viewed on a PC when images are uploaded to photo sharing sites or opened in imaging programs such as Nikon ViewNX.
Operating instructions for Micnova GPS-N Plus

Image: Step-by-step visual guide for operating the Micnova GPS-N Plus, including connecting cables, signal acquisition, and viewing geotagged data.

Maintenance

To ensure the longevity and optimal performance of your Micnova GPS-N Plus, follow these maintenance guidelines:

Troubleshooting

If you encounter issues with your Micnova GPS-N Plus, refer to the following common problems and solutions:

ProblemPossible CauseSolution
GPS unit not powering on.Incorrect cable connection; Camera not powered on; Damaged cable.Ensure the cable is securely connected to both the GPS unit and the camera. Turn on the camera. Try a different cable if available.
No GPS signal (flashing green light).Obstructed view of sky; Initial acquisition time; Indoor use.Move to an open outdoor area with a clear view of the sky. Allow a few minutes for initial signal acquisition. GPS signals are weak or unavailable indoors.
Inaccurate geotagging data.Weak or intermittent signal; Environmental interference.Ensure the unit has a strong, steady green light indicating a solid GPS lock. Avoid areas with tall buildings, dense foliage, or strong electromagnetic interference.
Geotag data not appearing in photos.GPS unit not locked; Camera settings.Verify the GPS unit has a solid green light before taking photos. Check your camera's menu (e.g., "Tools" or "Setup" menu) to ensure "Location Data" or "GPS" is enabled.

Specifications

FeatureDetail
Product Dimensions1.85 x 1.38 x 0.67 inches (47 x 35 x 17 mm)
Item Weight0.882 ounces (25g)
Model NameGPS N PLUS
Item Model Number8541746177
Connectivity TechnologyUSB (via camera connection)
Special FeaturesAutomatic geotagging of photos, High-sensitivity SiRF IV chipset
Power SourcePowered by camera (no external batteries required)
ColorBlack

Warranty and Support

For warranty information and technical support, please refer to the official Micnova website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Manufacturer: Micnova

Date First Available: August 31, 2018