Sandberg Voodoo Gaming Chair User Manual

1. Introduction

Thank you for purchasing the Sandberg Voodoo Gaming Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new gaming chair. Please read these instructions carefully before use and retain them for future reference.

Image 1.1: Front view of the Sandberg Voodoo Gaming Chair.

2. Package Contents

Before beginning assembly, ensure all components are present and undamaged. If any parts are missing or damaged, please contact your retailer.

• Backrest
• Seat Base
• Armrests (2)
• Gas Lift Cylinder
• Gas Lift Cover
• Star Base
• Casters (5)
• Mechanism Plate
• Side Covers (2)
• Lumbar Cushion (optional)
• Headrest Pillow (optional)
• Hardware Pack (screws, washers, Allen key)

3. Setup and Assembly

Follow these steps to assemble your Sandberg Voodoo Gaming Chair. It is recommended to have a second person assist with some steps.

1. Attach Casters to Star Base: Insert each caster into the holes at the end of the star base until it clicks securely into place.
2. Insert Gas Lift: Place the gas lift cylinder into the central hole of the star base. Cover it with the gas lift cover.
3. Attach Mechanism Plate to Seat Base: Align the mechanism plate with the pre-drilled holes on the underside of the seat base. Ensure the front of the mechanism faces the front of the seat. Secure with screws provided in the hardware pack.
4. Attach Armrests to Seat Base: Secure the armrests to the underside of the seat base using the provided screws. Ensure they are oriented correctly.
5. Attach Backrest to Seat Base: Align the backrest brackets with the mechanism plate on the seat base. Secure with screws. Attach the plastic side covers over the brackets.
6. Connect Seat Assembly to Gas Lift: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the central hole of the mechanism plate aligns with the top of the gas lift. Press down firmly.
7. Attach Cushions (Optional): If included, attach the lumbar cushion and headrest pillow using their straps.

4. Operating Instructions

Your Sandberg Voodoo Gaming Chair offers several adjustment options for optimal comfort.

• Seat Height Adjustment: Pull the lever located on the right side of the seat base upwards to raise or lower the seat. Release the lever at the desired height.
• Backrest Recline: Pull the lever on the left side of the seat base upwards to recline the backrest. Release the lever to lock the backrest in position.
• Tilt Tension Adjustment: Rotate the knob located underneath the front of the seat base to adjust the tension for the rocking function. Turn clockwise to increase tension, counter-clockwise to decrease.
• Armrest Adjustment: Press the button on the side of each armrest to adjust its height. Release the button to lock.

5. Maintenance and Care

Proper maintenance will extend the life and appearance of your gaming chair.

• Cleaning: The chair's faux leather material can be cleaned by wiping with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Regular Checks: Periodically check all screws and bolts to ensure they are tight. Retighten if necessary to maintain stability.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the material to fade or crack.
• Weight Limit: Do not exceed the recommended weight limit for the chair to prevent damage and ensure safety.

6. Troubleshooting

If you encounter any issues with your chair, refer to the following common problems and solutions:

• Chair Squeaks: Check all bolted connections and tighten any loose screws. A small amount of silicone lubricant can be applied to moving parts if the squeaking persists.
• Chair is Unstable/Wobbly: Ensure all casters are fully inserted into the star base. Verify that the gas lift is properly seated in both the star base and the mechanism plate. Check all assembly screws for tightness.
• Gas Lift Not Functioning: Ensure the height adjustment lever is fully engaged or disengaged as required. If the gas lift still does not operate, it may require replacement.
• Difficulty Reclining/Locking Backrest: Check the recline lever for obstructions. Ensure the tilt tension knob is not set too high, preventing easy recline.

7. Specifications

Image 7.1: Approximate assembled dimensions of the Sandberg Voodoo Gaming Chair (Height: 100cm, Width: 120cm, Depth: 150cm).

8. Warranty Information

Sandberg products are designed for durability and quality. This product comes with a 5-year warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.

9. Support and Contact

For further assistance, technical support, or warranty inquiries, please contact your retailer or visit the official Sandberg website. Please have your product model number (640-83) and proof of purchase ready when contacting support.

Sandberg Official Website: www.sandberg.it (Note: This is a general example, actual support link may vary by region.)