Introduction
Thank you for choosing the VIGO Ileana Single Handle Single-Hole Bathroom Faucet. This manual provides essential information for the safe installation, operation, and maintenance of your new faucet. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image: VIGO Ileana Single Handle Single-Hole Bathroom Faucet in Matte Black, showcasing its sleek design.
Safety Information
WARNING: California Residents - See Prop 65 WARNINGS for more information.
Always turn off the main water supply before attempting any plumbing work. Ensure all connections are secure to prevent leaks. If you are unsure about any installation steps, consult a qualified plumber. Wear appropriate personal protective equipment, such as safety glasses, during installation.
Package Contents
Verify that all components are present before beginning installation:
- VIGO Ileana Faucet Body
- Mounting Hardware
- Hot and Cold Water Supply Lines (Metal-braided PEX)
- Optional Deck Plate (for 3-hole installations)
Installation Instructions
This faucet is designed for single-hole installation. For 3-hole sinks, an optional deck plate is included. Standard US 3/8-inch plumbing connections and a 1-3/8-inch hole opening are required.
Image: Illustration detailing the 3/8-inch plumbing connections and 1 3/8-inch hole opening required for installation.
Step-by-Step Guide:
- Prepare the Sink: Ensure the sink hole is clean and free of debris. If using the optional deck plate for a 3-hole sink, place it over the holes.
- Install the Faucet: Insert the faucet body through the sink hole (and deck plate, if used). From underneath the sink, secure the faucet using the provided mounting hardware (washer and mounting nut). Tighten firmly but do not overtighten.
- Connect Water Supply Lines: Attach the hot and cold water supply lines to the corresponding inlets on the faucet body. Connect the other ends of the supply lines to your hot and cold water shut-off valves. Ensure all connections are hand-tightened, then use a wrench for a quarter turn to secure.
- Test for Leaks: Slowly turn on the main water supply. Check all connections for any signs of leaks. If leaks occur, tighten the connections slightly until they stop.
- Flush the Faucet: Turn on the faucet and let the water run for a few minutes to flush out any debris from the lines.
Installation Video:
Video: Official VIGO product video demonstrating the installation process and features of the Ileana faucet.
Operating Instructions
The VIGO Ileana faucet features a single handle for controlling both water temperature and flow. The unique waterfall spout design provides a gentle cascade of water.
Image: The VIGO Ileana faucet in operation, demonstrating the elegant waterfall flow.
- Water Flow: Lift the handle to turn on the water. The further you lift, the greater the flow.
- Temperature Control: Move the handle to the left for hot water and to the right for cold water. Adjust the position to achieve your desired temperature.
- WaterSense Certified: This faucet operates at 1.2 Gallons Per Minute (GPM), providing efficient water usage without compromising performance.
Image: Close-up of the faucet highlighting its 1.2 GPM flow rate and WaterSense certification for water efficiency.
Maintenance
To maintain the appearance and functionality of your VIGO Ileana faucet, follow these guidelines:
- Cleaning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Spot Resistance: The matte black finish is designed to resist fingerprints and water spots, requiring minimal effort to keep it looking clean.
- Ceramic Disc Valve: The faucet is equipped with a durable Sedal ceramic disc valve, tested for over 500,000 uses, ensuring long-lasting, drip-free performance.
Image: Exploded view illustrating the internal Sedal ceramic disc valve, highlighting its robust construction.
Troubleshooting
If you encounter issues with your faucet, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator or debris in supply lines. | Remove and clean the aerator. Flush supply lines by disconnecting them from the faucet and running water into a bucket. |
| Faucet Leaks | Loose connections or damaged O-rings/cartridge. | Check and tighten all supply line connections. If leaking from the handle or spout, the ceramic disc cartridge may need inspection or replacement. |
| Water Temperature Issues | Incorrect supply line connections or issues with water heater. | Verify hot and cold supply lines are connected correctly. Check your water heater settings. |
Specifications
Detailed technical specifications for the VIGO Ileana Faucet:
| Feature | Detail |
|---|---|
| Brand | VIGO |
| Model Name | Ileana |
| Model Number | VG01042MB |
| Finish Type | Matte Black |
| Material | Brass |
| Mounting Type | Deck Mount |
| Hole Count | 1 |
| Number of Handles | 1 |
| Handle Type | Lever |
| Spout Design | Waterfall |
| Flow Rate | 1.2 Gallons Per Minute |
| Valve Type | Disc Valve (Sedal Ceramic) |
| Item Weight | 4 Pounds |
| Spout Height | 4.5 Inches |
| Spout Reach | 4.75 Inches |
| Mounting Hole Diameter | 1.38 Inches |
| Hose Length | 6.75 Inches |
| Certifications | CUPC, NSF-61, AB1953, WaterSense |
Image: Technical drawing providing detailed dimensions for the VIGO Ileana faucet, including front and side views.
Product Overview Video:
Video: A 360-degree spin video showcasing the VIGO Ileana faucet from all angles, useful for visual inspection.
Warranty & Support
The VIGO Ileana Faucet comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official VIGO website.
For technical assistance, replacement parts, or any other inquiries, please contact VIGO customer support. Contact information can typically be found on the VIGO website or on your purchase receipt.
