Introduction
This manual provides instructions for the operation and maintenance of your iHip 5W Qi Wireless Charging Alarm Clock Bluetooth Speaker with FM Radio. This device integrates multiple functions including a digital alarm clock, a Bluetooth speaker for audio playback, an FM radio, and a 5W Qi wireless charging pad for compatible devices. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.
Package Contents
Verify that all items listed below are included in your package:
- 1 x Wireless Alarm Clock FM Radio Charging Clock
- 1 x Micro-USB Charging Cable
- 1 x Aux Cable
- 1 x User Manual
Image: Contents of the product package, including the main unit, charging cable, aux cable, and user manual.
Product Overview
Familiarize yourself with the various components and controls of your device.
Front Panel and Display
Image: Front view of the device, highlighting the LED time display and control buttons.
- LED Display: Shows current time, alarm status, and FM frequency.
- Control Buttons: Located above the display, these buttons manage power, mode selection, alarm settings, volume, and track control.
Rear Panel and Ports
Image: Rear view of the device, indicating the AUX port, ON/OFF switch, and Micro-USB charging port.
- AUX Port: For connecting external audio devices via the provided aux cable.
- ON/OFF Switch: Powers the device on or off.
- Micro-USB Charging Port: Connects the device to a power source using the Micro-USB charging cable.
Top Panel
- Wireless Charging Pad: The flat surface on top of the device for Qi-enabled wireless charging.
Setup
1. Power Connection
- Connect the Micro-USB charging cable to the Micro-USB Charging Port on the rear of the device.
- Plug the other end of the cable into a compatible USB power adapter (not included) and then into a wall outlet.
- Flip the ON/OFF Switch to the 'ON' position. The LED display will illuminate.
2. Initial Time Setting
Upon first power-on or after a power interruption, you may need to set the time.
- Press and hold the Time Set button (often indicated by a clock icon) until the hour digits begin to flash.
- Use the +/- buttons to adjust the hour.
- Press the Time Set button again to switch to minute adjustment.
- Use the +/- buttons to adjust the minutes.
- Press the Time Set button one more time to confirm and exit time setting mode.
Note: This device may display time in a 24-hour (military) format only. There might not be an option to switch to a 12-hour AM/PM format.
Operating Instructions
1. Bluetooth Speaker Functionality
- Ensure the device is powered on.
- Press the Mode button (often indicated by an 'M' or mode icon) until 'BT' or 'Bluetooth' appears on the display, indicating Bluetooth pairing mode.
- On your mobile device, enable Bluetooth and search for available devices.
- Select 'iHip Speaker' or a similar name from the list to pair. A confirmation tone may sound upon successful pairing.
- You can now play audio from your mobile device through the speaker. Use the +/- buttons for volume control and Previous/Next Track buttons for track navigation.
2. FM Radio Operation
- Press the Mode button until 'FM' appears on the display.
- Press and hold the Play/Pause button (often indicated by a play icon) to initiate an automatic scan for FM stations. The device will save found stations.
- Use the Previous/Next Track buttons to navigate through the saved FM stations.
- Adjust the volume using the +/- buttons.
3. Wireless Charging Functionality
This device features a 5W Qi wireless charging pad compatible with Qi-enabled smartphones.
Image: A smartphone being placed on the wireless charging pad of the device.
- Ensure the device is powered on and connected to a power source.
- Place your Qi-enabled smartphone directly onto the center of the wireless charging pad on top of the alarm clock.
- The phone should indicate that it is charging. If not, slightly adjust the phone's position until charging begins.
Note: For phones without built-in Qi functionality, an external Qi receiver (not included) is required. Charging speed may vary depending on the phone model and its battery level.
4. Alarm Clock Settings
- Press and hold the Alarm Set button (often indicated by an alarm clock icon) until the hour digits of the alarm time begin to flash.
- Use the +/- buttons to adjust the alarm hour.
- Press the Alarm Set button again to switch to minute adjustment.
- Use the +/- buttons to adjust the alarm minutes.
- Press the Alarm Set button one more time to confirm and exit alarm setting mode.
- To activate or deactivate the alarm, press the Alarm Set button briefly. An alarm icon on the display will indicate if the alarm is active.
- When the alarm sounds, press any button to silence it. This device typically does not feature a snooze function.
5. Hands-free Calling
When connected via Bluetooth to a smartphone, the built-in microphone allows for hands-free calls.
- To answer an incoming call, press the Play/Pause button.
- To end a call, press the Play/Pause button again.
- To reject an incoming call, press and hold the Play/Pause button.
Maintenance
- Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the device to extreme temperatures, direct sunlight, or moisture.
- Do not disassemble the device. This will void the warranty.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Cannot change from 24-hour (military) time. | This device may only support 24-hour time format. There might not be an option to switch to 12-hour AM/PM format. Refer to the time setting instructions. |
| Slow charging or phone not charging wirelessly. | Ensure your phone is Qi-enabled or has a compatible Qi receiver. Verify the phone is centered on the charging pad. Remove any thick phone cases. Ensure the alarm clock is powered by a sufficient adapter. |
| Poor FM radio reception. | Relocate the device to an area with better signal. Ensure no large metal objects are near the device. The built-in antenna may have limited range in some environments. |
| Phone slides off the charging pad. | The top surface may not be completely flat or may lack sufficient grip. Ensure the device is placed on a stable, level surface. Consider using a thin, non-slip mat if necessary. |
| Speaker volume is low. | Increase the volume on both the alarm clock (using +/- buttons) and the connected Bluetooth device. Ensure the audio source is playing at an adequate level. |
| No snooze function. | This model typically does not include a snooze feature. Pressing any button will silence the alarm until the next set time. |
Specifications
- Model Number: WLGCLOCHGR-BK
- Bluetooth Version: V4.2
- Speaker Output: 3W
- Battery: 1600mAh / DC 5V1A
- Wireless Charger Output: 5W
- Sensitivity: 80dB +/- 2dB
- Frequency Response: 280Hz - 16KHz
- Product Dimensions: 5 x 4 x 3 inches (12.7 x 10.16 x 7.62 cm)
- Item Weight: 11.2 ounces (317.5 grams)
- Color: Black
- Input Voltage: 120 Volts (AC)
Warranty and Support
All Zeikos direct products come with a one-year warranty policy. For any support needs or inquiries, please contact the customer support team of Zeikos. They are committed to providing assistance to ensure customer satisfaction.
