1. Introduction
This manual provides essential instructions for the safe assembly, operation, and maintenance of your Intex Ultra XTR Deluxe Above Ground Swimming Pool Set (Model 26339EH, 24' x 52"). Please read all instructions carefully before installation and use to ensure proper function and longevity of your pool.
The Intex Ultra XTR Deluxe pool features a uniquely designed frame combining high-quality galvanized steel with a precision-engineered locking system for enhanced durability and stability. The pool liner is constructed from puncture-resistant 3-Ply PVC material, offering superior tear resistance compared to standard metal frame pool liners.
Image: Fully assembled Intex Ultra XTR Deluxe Above Ground Swimming Pool Set, showcasing its round shape, dark gray frame, and included sand filter pump and ladder.
Image: An Intex Ultra XTR Deluxe pool in a backyard setting, demonstrating its large size and suitability for recreational use.
2. Safety Information
WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. Always ensure adult supervision when the pool is in use. Drowning is a serious risk. Never leave children unattended in or near the pool.
Please consult the product packaging and all included documentation for additional warnings and safety guidelines specific to your region and product model. Adhere to all local regulations regarding pool installation and safety barriers.
- Ensure the pool is installed on a firm, level surface.
- Keep children under constant supervision.
- Install appropriate safety barriers around the pool.
- Do not dive or jump into the pool.
- Keep electrical cords away from the pool area.
- Regularly check and maintain water chemistry.
3. Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact Intex customer support.
Image: Visual representation of all components included in the Intex Ultra XTR Deluxe Pool Set package.
- Pool Liner (3-Ply PVC material)
- Pool Frame (Galvanized steel with Easy Lock System)
- Krystal Clear Sand Filter Pump SX2800 (#26647EG)
- Removable Ladder
- Pool Cover
- Ground Cloth
- Repair Patch
4. Setup Instructions
The Intex Ultra XTR pools are designed for easy assembly, typically ready for water in approximately 60 minutes. No locking pins or additional tools are needed for frame assembly due to the Easy Lock System.
4.1 Site Preparation
- Choose a Level Location: Select a firm, completely level area for pool installation. Uneven ground can cause structural stress and potential pool collapse.
- Clear the Area: Remove all sharp objects, debris, and vegetation from the chosen site.
- Install Ground Cloth: Spread the included ground cloth over the prepared area to protect the pool liner.
4.2 Frame Assembly
The frame components simply snap together using the Easy Lock System. Ensure all connections are secure.
Image: Close-up of the Easy-Lock System for tool-free frame assembly and a visual comparison highlighting the rust resistance of the galvanized steel frame.
- Connect the horizontal beams to the vertical legs using the Easy Lock System.
- Ensure the T-Joints are properly aligned and secured. These joints are engineered for high strength and infused with UV inhibitor for weather resistance.
- The frame is constructed from galvanized steel with inner and outer powder coating for ultimate rust resistance.
4.3 Liner Installation
- Carefully unfold the pool liner onto the ground cloth, ensuring the drain plug is positioned correctly.
- Attach the liner to the assembled frame according to the detailed instructions provided in the separate assembly guide.
4.4 Filling the Pool
Begin filling the pool with water. As the water level rises, smooth out any wrinkles in the bottom of the liner. Stop filling when the water reaches the recommended fill line.
5. Operation
The Intex Ultra XTR Deluxe pool set includes a Krystal Clear Sand Filter Pump SX2800 for efficient water filtration.
5.1 Krystal Clear Sand Filter Pump SX2800
Image: The Krystal Clear Sand Filter Pump SX2800, highlighting its features and Hydro Aeration Technology.
The sand filter pump provides excellent water filtration and features a 6-function control valve. Sand in the filter can last up to 5 years with regular backwashing. The pump flow rate is 2800 GPH.
- Filter: Normal filtering operation.
- Backwash: Cleans the sand filter by reversing water flow.
- Rinse: Used after backwashing to settle the sand.
- Recirculate: Circulates water without filtering (e.g., for chemical mixing).
- Drain: Drains water from the pool.
- Close System: Shuts off all flow to the filter.
Refer to the separate Krystal Clear Sand Filter Pump manual for detailed instructions on installation, operation, and maintenance of the pump.
5.2 Hydro Aeration Technology
Image: The Hydro Aeration Technology in action, showing improved water circulation and aeration.
Intex's patented Hydro Aeration Technology is integrated to improve water circulation, clarity, and freshness in above ground pools. This system introduces air into the water, enhancing filtration and water quality.
6. Maintenance
Regular maintenance is crucial for the longevity and hygiene of your pool.
6.1 Water Chemistry
Maintain proper water chemistry by regularly testing and adjusting pH, chlorine, and alkalinity levels. Consult a pool supply professional for recommended chemical levels and treatment procedures.
6.2 Filter Maintenance
Perform regular backwashing and rinsing of the sand filter as indicated by pressure gauge readings or recommended schedule. Replace filter sand every 3-5 years, or as needed.
6.3 Cleaning
- Skim debris from the water surface daily.
- Brush pool walls and floor weekly to prevent algae growth.
- Vacuum the pool floor as needed to remove settled debris.
6.4 Liner Repair
In case of minor damage, a repair patch is included for easy fixes. Clean and dry the affected area thoroughly before applying the patch according to its instructions.
6.5 Winterization
For seasonal use, properly winterize your pool before freezing temperatures arrive. This typically involves draining the pool, cleaning the liner, disassembling components, and storing them in a dry, protected area. Refer to the full manual for detailed winterization steps.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water is cloudy or dirty | Insufficient filtration; improper water chemistry; dirty filter sand. | Run filter pump longer; backwash/rinse filter; test and adjust water chemistry; replace filter sand if old. |
| Pump not running | Power supply issue; clogged impeller; pump malfunction. | Check power connection and circuit breaker; inspect and clean impeller; contact customer support if pump is faulty. |
| Water leaking from pool | Puncture in liner; loose hose connections; faulty drain plug. | Locate and repair puncture with included patch; tighten all hose clamps; ensure drain plug is securely closed. |
| Frame instability | Uneven ground; improperly assembled frame components. | Ensure pool is on a perfectly level surface; re-check all Easy Lock System connections for secure fit. |
For issues not listed here, or if troubleshooting steps do not resolve the problem, please contact Intex customer support.
8. Specifications
Image: Key dimensions and water capacity of the Intex Ultra XTR Deluxe 24' x 52" pool.
| Brand | Intex |
| Model Number | 26339EH |
| Product Dimensions (L x W x H) | 288"L x 288"W x 50.88"H (24' x 24' x 52") |
| Shape | Round |
| Water Capacity | 12,481 Gallons |
| Water Depth | 46 inches |
| Material | Alloy Steel, Polyvinyl Chloride (PVC) |
| Liner Construction | 3-Ply PVC (50% higher tear resistance) |
| Frame Construction | Galvanized Steel with inner and outer powder coating |
| Filter Pump Type | Krystal Clear Sand Filter Pump SX2800 (#26647EG) |
| Pump Flow Rate | 2800 GPH |
| Assembly Time | Approx. 60 minutes |
| Item Weight | 284.6 Pounds |
| UPC | 078257263394 |
9. Warranty & Support
The Intex Ultra XTR Deluxe Above Ground Swimming Pool Set includes a 2-year warranty for peace of mind. This warranty covers manufacturing defects and ensures the quality of the product under normal use.
For warranty claims, technical assistance, or to order replacement parts, please contact Intex customer support directly. Keep your proof of purchase and model number (26339EH) readily available when contacting support.
Intex Customer Service: Refer to the contact information provided in your product packaging or visit the official Intex website for the most current support details.
