1. Product Overview
Thank you for choosing the SEBSON LED Under Cabinet Light. This instruction manual provides essential information for the safe and efficient use of your new lighting product. This LED light bar is designed for versatile indoor applications, offering bright, neutral white illumination with a slim profile for discreet installation.
- Brand: SEBSON
- Model: S-101009 (50cm)
- Key Features: Integrated LED module, slim design (13mm high, 24mm wide), neutral white light (4000K), 700lm, 8W, 230V, IP20.
- Applications: Ideal for kitchens, cabinets, shelves, and other indoor furniture.
2. Safety Instructions
Please read these safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Electrical Safety: Always disconnect the power supply before installation, maintenance, or cleaning. Installation should only be performed by qualified personnel if you are unsure about electrical wiring.
- Indoor Use Only: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but offers no protection against water. Do not use in damp environments or outdoors.
- Voltage: Ensure the power supply voltage matches the product's requirement (230V).
- Non-Dimmable: This LED light is not dimmable. Do not connect it to a dimmer switch, as this may damage the product.
- Heat: Do not cover the light bar during operation to prevent overheating.
- Damage: Do not use the product if the cable or housing is damaged.
3. Package Contents
Verify that all components are present in the package:
- 1 x SEBSON LED Under Cabinet Light (50cm)
- 2 x Mounting Screws
4. Setup and Installation
Follow these steps to install your SEBSON LED Under Cabinet Light:
- Unpack: Carefully remove all components from the packaging.
- Choose Location: Select a suitable, dry indoor location for mounting, such as under a kitchen cabinet, shelf, or inside a wardrobe. Ensure there is a 230V power outlet nearby.
- Mark Drilling Points: Hold the LED light bar in the desired mounting position. Use a pencil to mark the locations for the two mounting screws.
- Drill Holes: Drill small pilot holes at the marked points. Ensure the drill bit size is appropriate for the provided screws.
- Mount the Light Bar: Align the light bar with the drilled holes and secure it firmly using the two provided screws.
- Connect to Power: Plug the light bar's power cable into a standard 230V electrical outlet.
5. Operating Instructions
The SEBSON LED Under Cabinet Light is simple to operate:
- Once plugged into a 230V power outlet, use the integrated switch located on the light bar to turn the light ON or OFF.
6. Maintenance
To ensure the longevity and optimal performance of your LED light bar, follow these maintenance guidelines:
- Cleaning: Disconnect the power supply before cleaning. Use a soft, dry, lint-free cloth to wipe the surface of the light bar. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Inspection: Periodically check the power cable and plug for any signs of damage. If damage is found, discontinue use and contact customer support.
- No User-Serviceable Parts: The LED module is integrated and not designed to be replaced by the user. Do not attempt to open or repair the light bar.
7. Troubleshooting
If you encounter issues with your LED light bar, refer to the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. | Check if the power plug is securely inserted into the outlet. Test the outlet with another device to ensure it is functional. |
| Switch is OFF. | Ensure the integrated switch on the light bar is in the ON position. | |
| Light flickers. | Unstable power connection. | Ensure the power plug is firmly connected. Avoid connecting to outlets with fluctuating power. |
| Incompatible dimmer. | This light is non-dimmable. Ensure it is not connected to a dimmer switch. |
If the problem persists after attempting these solutions, please contact SEBSON customer support for further assistance.
8. Specifications
Detailed technical specifications for the SEBSON LED Under Cabinet Light (Model S-101009):
- Brand: SEBSON
- Model Number: S-101009 (UNDER_LED_50)
- Dimensions (L x W x H): 50 x 2.4 x 1.35 cm
- Weight: 138 grams
- Power Consumption: 8 Watts
- Voltage: 230 Volts
- Luminous Flux: 700 lm
- Color Temperature: 4000 Kelvin (Neutral White)
- Color Rendering Index (CRI): >80 Ra
- Beam Angle: 110°
- Average Lifespan: 15,000 Hours
- IP Rating: IP20 (Indoor use only)
- Material: Plastic
- Switch Style: Integrated rocker switch
- Special Features: Non-dimmable
- Components Included: 1 x LED light bar, 2 x mounting screws
9. Warranty and Support
This SEBSON product is covered by a standard manufacturer's warranty. Please refer to the specific terms and conditions provided at the time of purchase or on the official SEBSON website for details regarding warranty duration and coverage.
For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or visit the official SEBSON website. When contacting support, please have your product model number (S-101009) and proof of purchase readily available.
