Introduction
Thank you for choosing the Armitron Sport Digital Chronograph Watch, Model 40/8417PBH. This watch is designed for active lifestyles, offering a range of features including time, date, chronograph, alarm, and backlight. Please read this manual carefully to understand the functions and proper care of your watch.
Image: The Armitron Sport Digital Chronograph Watch, Model 40/8417PBH, displayed on a wrist.
Setup
Button Functions
- MODE Button: Cycles through different modes (Time, Chronograph, Alarm, etc.).
- SET/ADJ Button: Used to enter setting mode and adjust values.
- START/STOP Button: Starts and stops functions like the chronograph, or changes values during setting.
- LIGHT Button: Activates the backlight.
Setting Time and Date
- From the normal time display, press the MODE button until the time setting mode is displayed (usually indicated by flashing digits).
- Press the SET/ADJ button to select the digit you wish to adjust (e.g., hours, minutes, year, month, day). The selected digit will flash.
- Use the START/STOP button to increase the value of the flashing digit. Hold to rapidly advance.
- Repeat steps 2 and 3 until all desired time and date settings are correct.
- Press the MODE button to exit the setting mode and return to the normal time display.
Operating
Time Display
The watch displays time in either 12-hour or 24-hour (military) format. To switch between formats, press the SET/ADJ button while in normal time display mode.
Chronograph (Stopwatch)
- Press the MODE button until the chronograph mode is displayed (usually showing '00:00:00').
- Press the START/STOP button to start the chronograph.
- Press the START/STOP button again to pause the chronograph. Press it once more to resume.
- To record a lap time, press the SET/ADJ button while the chronograph is running. The lap time will display briefly before returning to the running total.
- To reset the chronograph, ensure it is stopped, then press the SET/ADJ button.
Alarm Function
- Press the MODE button until the alarm setting mode is displayed.
- Press the SET/ADJ button to select the hour or minute digits.
- Use the START/STOP button to adjust the alarm time.
- Press the MODE button to confirm and exit.
- To activate/deactivate the alarm, press the START/STOP button while in alarm mode. An alarm icon will appear when active.
Backlight
Press the LIGHT button to illuminate the display. The backlight will remain active for approximately three seconds.
Water Resistance
Your Armitron Sport watch is water resistant up to 50 meters (165 feet). This means it is suitable for short periods of recreational swimming, but not for diving or snorkeling. Avoid pressing buttons underwater to prevent water entry.
Image: Water Resistance Chart indicating suitability for various water activities.
Maintenance
Cleaning
Wipe the watch regularly with a soft, damp cloth. For silicone straps, mild soap and water can be used. Avoid harsh chemicals or abrasive materials that could damage the watch finish or strap.
Battery Replacement
The watch uses one Lithium Metal battery (included). When the display dims or functions become erratic, it may be time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.
Water Resistance Care
To maintain water resistance, ensure the watch case and buttons are free from damage. Avoid exposing the watch to extreme temperature changes, as this can affect the seals. Do not operate buttons while the watch is submerged in water.
Troubleshooting
- Display is blank or dim: The battery may be low or depleted. Replace the battery.
- Time is incorrect: Re-set the time following the instructions in the 'Setting Time and Date' section. Ensure the correct 12/24-hour format is selected.
- Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though this model typically does not have one). If the issue persists, a battery replacement or professional inspection may be needed.
- Water inside the watch: Immediately take the watch to a qualified watch technician for inspection and repair to prevent further damage.
Specifications
| Feature | Specification |
|---|---|
| Model Number | 40/8417PBH |
| Movement | Quartz |
| Display Type | Digital LCD |
| Case Material | Resin |
| Case Diameter | 38 mm |
| Case Thickness | 12 mm |
| Band Material | Silicone |
| Band Width | 26 mm |
| Band Length | 9.5 inches |
| Crystal Material | Acrylic |
| Water Resistance | 50 meters (165 feet) |
| Power Source | Battery (1 Lithium Metal, included) |
| Functions | Time, Seconds, Day, Date, Chronograph, Lap Time, Alarm, Military Time, Backlight |
Warranty and Support
Warranty Information
Armitron watches typically come with a limited warranty covering manufacturing defects. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.
Customer Support
For further assistance, technical support, or warranty service, please contact Armitron customer service. Contact details can usually be found on the official Armitron website or on your product packaging.
