Intex Underwater LED Magnetic Above Ground Wall Pool Light

Introduction

The Intex Underwater LED Magnetic Above Ground Wall Pool Light is designed to provide efficient and versatile illumination for soft-sided above-ground pools. Utilizing magnetic technology, this light offers easy installation and removal, along with options for white or multi-color lighting. This manual provides essential information for the safe and effective use of your pool light.

Safety Information

• Always ensure the power source is disconnected before installation, removal, or maintenance.
• Do not attempt to open or repair the sealed light unit. Refer to qualified service personnel for any issues.
• Ensure the 120-volt power source transmitter is placed in a dry, protected area away from direct water exposure.
• Keep children away from the power cord and transmitter unit.
• This product is designed for above-ground pools only. Do not use in in-ground pools or other water bodies.
• If the light unit separates from the power supply and floats, retrieve it carefully and inspect for damage before reattaching.

Package Contents

Verify that all components are present before beginning installation:

• 1 x Intex Underwater LED Magnetic Pool Light Unit
• 1 x Magnetic Power Source Transmitter with 23-foot power cord
• Instruction Manual (this document)

Image: The Intex Underwater LED Magnetic Pool Light, showing both the internal light unit and the external magnetic transmitter with its power cord.

Setup

1. Choose Location: Select a desired location on the sidewall of your soft-sided above-ground pool. Ensure the 23-foot power cord can reach a suitable 120V power outlet safely.
2. Position External Unit: Place the external magnetic power source transmitter on the outside of the pool wall at the chosen location.
3. Position Internal Unit: Submerge the LED light unit in the pool water and align it directly opposite the external transmitter on the inside of the pool wall. The magnetic force will hold the two units together, securing the light to the pool wall.
4. Connect Power: Plug the 120V power cord from the external transmitter into a grounded electrical outlet.

Image: A woman demonstrating the installation of the Intex pool light by aligning the internal and external magnetic units on the pool wall.

Image: A diagram illustrating how the magnetic technology works, showing the underwater light unit and the outer wall transmitter magnetically coupled through the pool wall.

Operating Instructions

The Intex Underwater LED Magnetic Pool Light features dual lighting options: white light and a multi-color setting with four different color modes.

1. Power On/Off: Once plugged in, the light can be turned on or off using the control buttons located on the external transmitter unit.
2. Switching Modes: Press the button(s) on the external unit to cycle through the available lighting modes: white light and multi-color changing modes.
3. Multi-Color Modes: The multi-color setting includes four distinct color modes that can be selected to suit your preference.

Image: A close-up view of the control buttons on the external part of the Intex pool light unit, used for power and mode selection.

Image: Four separate images demonstrating the different multi-color lighting options available from the Intex pool light, including green, blue, purple, and teal.

Image: A group of people enjoying an above-ground pool at night, illuminated by the bright blue light from the Intex LED pool light.

Maintenance

• Cleaning: Periodically wipe down the external unit with a damp cloth to remove dust and debris. For the internal unit, gently clean any algae or mineral buildup with a soft brush or cloth while it is submerged or after removal.
• Storage: When not in use for extended periods, disconnect the power, remove the light from the pool, clean both units, and store them in a dry, cool place away from direct sunlight.
• Cord Inspection: Regularly inspect the power cord for any signs of damage, fraying, or cuts. If damage is found, discontinue use immediately and replace the unit.

Troubleshooting

Specifications

• Model: 28697E
• Light Source: LED
• Brightness: 50 Lumens
• Color Temperature: 3000 Kelvin (for white light)
• Wattage: 10 Watts
• Voltage: 120 Volts
• Power Source: Corded Electric
• Cord Length: 23 feet
• Material: Plastic
• Water Resistance Level: Waterproof
• Recommended Pool Size Coverage: Up to 24 feet
• Dimensions: 10"L x 7.88"W x 5.88"H
• Item Weight: 2.93 pounds

Warranty and Support

Intex products are manufactured with the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. Intex warrants this product against defects in materials and workmanship for a period of 90 days from the date of retail purchase.

This warranty does not cover defects resulting from negligence, misuse, accident, improper operation, lack of maintenance, or acts of nature. For warranty claims or technical support, please refer to the contact information provided on the Intex website or your purchase receipt.

For further assistance, please visit the official Intex website or contact their customer service department. Keep your proof of purchase for warranty validation.