Berdsen ClearJet X3 Portable Dental Water Flosser User Manual

1. Important Safety Information

Please read all instructions carefully before using this product. Keep this manual for future reference.

• Do not immerse the device in water. The device is IPX7 waterproof, but the charging port should be kept dry.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Use only clean water or dentist-recommended mouthwash. Do not use iodine, saline, or water-insoluble concentrated essential oils.
• If you have had oral surgery or gum disease, consult your dentist before using this device.
• Do not direct water under the tongue, into the ear, nose, or other delicate areas. This product is capable of producing pressures that may cause damage in these areas.
• Ensure the charging cable is fully inserted into the charging port during charging.
• Unplug the charger from the power outlet when not in use.

2. Package Contents

Verify that all items are included in your package:

• Berdsen ClearJet X3 Oral Irrigator
• Standard Nozzles (x2)
• Tongue Cleaner Nozzle (x1)
• Orthodontic Nozzle (x1)
• Charging Cable (USB)
• User Manual

Image: The Berdsen ClearJet X3 water flosser unit displayed alongside its four interchangeable nozzles (two standard, one tongue cleaner, one orthodontic) and the charging cable.

3. Product Overview

Familiarize yourself with the components of your Berdsen ClearJet X3.

Image: A detailed view of the Berdsen ClearJet X3 water flosser, highlighting the main unit with its control panel and attached nozzle.

1. Nozzle Release Button: Press to detach the nozzle.
2. Nozzle: Interchangeable tips for various cleaning needs.
3. Water Inlet: Where water is drawn into the nozzle.
4. On/Off Button: Powers the device on or off.
5. Mode Button: Cycles through operating modes (Normal, Soft, Pulse).
6. Mode Indicators: LEDs to show the currently selected mode.
7. Water Tank: Transparent reservoir for water.
8. Charging Port: Located at the bottom for connecting the charging cable.

Image: A close-up of the Berdsen ClearJet X3's control panel, featuring the 'On/Off' button, 'Mode' button, and LED indicators for 'Normal', 'Soft', and 'Pulse' settings.

4. Setup and Charging

4.1 Initial Charge

Before first use, fully charge the device. The integrated battery ensures portability.

1. Locate the charging port at the bottom of the device.
2. Insert the charging cable firmly into the port.
3. Connect the other end of the USB cable to a suitable USB power adapter (not included) or a computer USB port.
4. The charging indicator light will illuminate. A full charge typically takes several hours.
5. Once fully charged, disconnect the cable.

Image: The base of the Berdsen ClearJet X3 water flosser, illustrating the charging port with a connected USB cable, indicating the device is being charged.

4.2 Attaching a Nozzle

1. Select the desired nozzle (standard, tongue cleaner, or orthodontic).
2. Insert the nozzle into the opening at the top of the flosser until it clicks securely into place.
3. To remove, press the nozzle release button and pull the nozzle upwards.

Image: A close-up view of the four distinct nozzles provided with the Berdsen ClearJet X3: two standard tips, one tongue cleaning attachment, and one specialized orthodontic tip.

4.3 Filling the Water Tank

1. Open the water tank cover located on the side of the device.
2. Fill the 150ml tank with lukewarm water. You may also use dentist-recommended mouthwash.
3. Close the water tank cover firmly to prevent leakage.

Image: A side profile of the Berdsen ClearJet X3 water flosser, clearly showing its transparent 150ml water tank, which allows users to monitor the water level.

5. Operating the Device

5.1 Selecting an Operating Mode

The Berdsen ClearJet X3 offers three operating modes:

• Normal: Standard mode for effective daily cleaning and plaque removal.
• Soft: Gentle mode for sensitive gums or first-time users.
• Pulse: Pulsating massage mode for gum stimulation and improved circulation.

Press the Mode button to cycle through these settings. The corresponding LED indicator will light up.

Image: A detailed view of the Berdsen ClearJet X3's mode selection area, clearly showing the three distinct operating modes: Normal, Soft, and Pulse, each with its own indicator light.

5.2 Usage Instructions

1. Ensure the water tank is filled and a nozzle is securely attached.
2. Select your desired operating mode.
3. Lean over a sink and place the nozzle tip into your mouth, aiming it at your gumline at a 90-degree angle.
4. Press the On/Off button to start the water flow.
5. Guide the water jet along your gumline, pausing briefly between teeth. Allow the water to flow into the sink.
6. The device features a 2-minute auto-timer, after which it will automatically shut off.
7. After use, press the On/Off button to turn off the device if it hasn't already.

Image: A user demonstrating the correct technique for using the Berdsen ClearJet X3 water flosser, showing the water jet effectively cleaning between teeth and along the gumline.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and hygiene.

6.1 After Each Use

1. Empty any remaining water from the tank.
2. Run the device briefly with an empty tank to clear any residual water from the internal components.
3. Remove the nozzle and rinse it under running water.
4. Wipe the main unit with a soft, damp cloth. Do not use abrasive cleaners.
5. Allow all parts to air dry before storing.

6.2 Descaling (Monthly)

To prevent mineral buildup, descale the unit monthly:

1. Mix 1 part white vinegar with 2 parts water in the water tank.
2. Run the solution through the device until the tank is empty.
3. Rinse the tank and run two full tanks of clean water through the device to flush out any vinegar residue.

7. Troubleshooting

8. Specifications

9. Disposal Information

This product contains an integrated battery and electronic components. Do not dispose of the product with general household waste at the end of its service life. Please dispose of it at an official collection point for the recycling of electrical and electronic equipment. This helps protect the environment and human health.