1. Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your PDP Gaming Legend Of Zelda Link GameCube Wired Fight Pad Pro Controller for Nintendo Switch. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
2. Product Overview
The PDP Gaming Legend Of Zelda Link GameCube Wired Fight Pad Pro Controller is designed to provide a classic GameCube-style gaming experience on your Nintendo Switch. It features a wired USB connection for reliable performance and is officially licensed by Nintendo.
Key Features:
- GameCube-inspired design for familiar ergonomics.
- Detachable C-stick for customization, allowing you to swap it for a full-size stick.
- 10-foot USB cable for ample playing distance.
- Designed for use with Nintendo Switch and compatible with Super Smash Bros. Ultimate.
Note: No relevant product images were provided for this controller, therefore no images can be embedded in this section.
3. Setup
Follow these steps to connect your controller to your Nintendo Switch console:
- Ensure your Nintendo Switch console is docked or connected to a power source.
- Locate an available USB port on your Nintendo Switch dock.
- Plug the USB connector of the PDP Gaming Fight Pad Pro Controller into the USB port on the dock.
- The controller should be automatically recognized by your Nintendo Switch. You can verify this by navigating to the 'Controllers' menu on the Switch Home screen.
- To customize the C-stick, gently pull the existing C-stick module upwards to remove it. Insert the desired stick module (standard C-stick or full-size stick) into the slot until it clicks into place.
Note: No official product videos were provided for this controller, therefore no videos can be embedded in this section.
4. Operating Instructions
The PDP Gaming Fight Pad Pro Controller functions similarly to a standard Nintendo Switch Pro Controller, with a layout inspired by the GameCube controller.
Button Layout and Functions:
- A, B, X, Y Buttons: Standard action buttons.
- L, R Buttons: Shoulder buttons.
- ZL, ZR Buttons: Trigger buttons.
- D-Pad: Directional input.
- Left Analog Stick: Primary movement control.
- Right Analog Stick (C-Stick): Secondary analog input, often used for camera control or Smash attacks.
- + (Plus) Button: Start/Pause button.
- - (Minus) Button: Select button.
- Home Button: Returns to the Nintendo Switch Home menu.
- Capture Button: Takes screenshots or video clips.
This controller is wired and does not require batteries or charging. It draws power directly from the Nintendo Switch dock via the USB connection.
5. Maintenance
Proper care and maintenance will help extend the life of your controller.
Cleaning:
- Disconnect the controller from the Nintendo Switch before cleaning.
- Use a soft, dry cloth to wipe down the surface of the controller.
- For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals, solvents, or abrasive cleaners.
- Do not allow liquids to enter the controller's openings.
Storage:
- Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid wrapping the USB cable too tightly around the controller to prevent damage to the cable or connector.
6. Troubleshooting
If you encounter issues with your controller, refer to the following common problems and solutions:
Controller Not Responding:
- Check USB Connection: Ensure the USB cable is securely plugged into both the controller and an active USB port on the Nintendo Switch dock. Try unplugging and re-plugging the cable.
- Try a Different USB Port: If available, connect the controller to another USB port on the dock.
- Restart Nintendo Switch: Power cycle your Nintendo Switch console. Turn it completely off and then back on.
- Test on Another Console (if possible): If you have access to another Nintendo Switch, test the controller there to determine if the issue is with the controller or the console.
Incorrect or Unintended Inputs:
- Check for Debris: Ensure no debris is lodged around the buttons or analog sticks.
- Recalibrate Sticks: On your Nintendo Switch, go to System Settings > Controllers and Sensors > Calibrate Control Sticks to recalibrate the analog sticks.
- Update System Software: Ensure your Nintendo Switch system software is up to date. Go to System Settings > System > System Update.
If these steps do not resolve your issue, please contact PDP customer support for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 168150 |
| Product Dimensions | 1.34 x 2.44 x 2.4 inches |
| Item Weight | 14.9 ounces |
| Connectivity | Wired USB |
| Compatibility | Nintendo Switch |
| Cable Length | 10 feet |
| First Available Date | September 25, 2018 |
8. Warranty Information
PDP products are designed for quality and reliability. This product is covered by a manufacturer's warranty. For specific warranty terms, conditions, and registration, please refer to the official PDP website or contact their customer support directly. Keep your proof of purchase for warranty claims.
9. Support
For additional assistance, technical support, or to inquire about replacement parts, please visit the official PDP website or contact their customer service department.
- PDP Official Website: Visit the PDP Store on Amazon (for product information and potentially support links)
- Refer to the product packaging for direct contact information or support portals.
