IKEA Drawer Unit Assembly and User Manual

1. Introduction

Thank you for choosing the IKEA Drawer Unit. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

2. Safety Information

• Tip-over Hazard: Furniture tip-overs can cause serious or fatal crushing injuries. Always secure this unit to the wall using the provided anti-tip device.
• Assembly: Assembly must be carried out by a competent person. Incorrect assembly can lead to the furniture tipping or falling, causing serious injury.
• Small Parts: Keep all small parts, such as screws and fittings, out of reach of children during assembly to prevent choking hazards.
• Weight Limits: Do not overload drawers. Distribute weight evenly to maintain stability.
• Placement: Place the unit on a level surface. Uneven surfaces can affect stability and drawer function.

3. Package Contents

Before assembly, ensure all parts are present. Refer to the separate assembly diagram for a detailed list of components and hardware. If any parts are missing or damaged, contact IKEA customer service.

Image 1: Example of IKEA Drawer Unit components. This image illustrates the various panels, hardware, and drawer parts typically included in the package, laid out before assembly begins.

4. Setup and Assembly

Assembly is required for this IKEA Drawer Unit. Follow the steps below and refer to the included graphical instructions for detailed guidance.

1. Prepare Workspace: Clear a spacious, clean, and level area for assembly. Lay down a blanket or cardboard to protect the furniture parts and your floor.
2. Identify Parts: Unpack all components and identify them using the parts list in the separate assembly diagram.
3. Assemble Frame: Begin by assembling the main frame of the drawer unit. Attach the side panels to the top and bottom panels using the provided dowels and cam locks/screws. Ensure all connections are secure.
4. Attach Back Panel: Secure the back panel to the frame using small nails or screws. This adds stability and squareness to the unit.
5. Install Drawer Runners: Attach the drawer runners to the inside of the frame according to the diagram. Pay attention to the orientation (left/right, front/back).
6. Assemble Drawers: For each drawer, assemble the front, back, and side panels. Slide the bottom panel into the grooves. Attach the drawer runners to the sides of the assembled drawer.
7. Insert Drawers: Carefully slide each assembled drawer onto its respective runners in the main frame.
8. Attach Handles: Secure handles or knobs to the drawer fronts.
9. Secure to Wall: Crucially, attach the anti-tip device to the back of the drawer unit and then to a wall stud or appropriate wall anchor. This prevents the unit from tipping over.

Tools required: Hammer, screwdriver (Phillips head), measuring tape.

5. Operating Instructions

• Opening/Closing Drawers: Gently pull or push the drawer fronts to open and close. Avoid forcing drawers.
• Loading: Distribute items evenly within the drawers. Avoid placing excessively heavy items in a single drawer, especially in upper drawers, as this can affect stability.
• Stability: Always ensure the unit is securely anchored to the wall. Do not climb on or lean heavily on the unit.

6. Maintenance

• Cleaning: Wipe clean with a damp cloth and a mild cleaner. Wipe dry with a clean cloth. Avoid abrasive cleaners or harsh chemicals.
• Fasteners: Periodically check all assembly fasteners (screws, cam locks) and re-tighten if necessary to maintain structural integrity.
• Drawer Runners: If drawers become stiff, a small amount of silicone-based lubricant can be applied to the runners, but typically this is not required for IKEA units.

7. Troubleshooting

• Drawers stick or don't close properly:
  • Check if the unit is on a level surface.
  • Ensure all assembly screws are tightened.
  • Verify that drawer runners are correctly installed and aligned.
  • Check for obstructions inside the drawer or on the runners.
• Unit wobbles:
  • Ensure the unit is placed on a level surface.
  • Re-tighten all assembly fasteners.
  • Confirm the back panel is securely attached, as it contributes to stability.
  • Verify the unit is properly anchored to the wall using the anti-tip device.

8. Specifications

9. Warranty and Support

IKEA products are designed with quality and durability in mind. For specific warranty information regarding your Drawer Unit, please refer to the warranty documentation included with your purchase or visit the official IKEA website.

For customer support, missing parts, or further assistance, please contact IKEA customer service through their official channels. Have your proof of purchase and product model information ready.