Spigen GlasTR EZ FIT Screen Protector Instruction Manual

1. Product Overview

The Spigen GlasTR EZ FIT is a tempered glass screen protector designed to safeguard the display of your iPhone 11 or iPhone XR. It features a 9H hardness rating for durability and an oleophobic coating to resist fingerprints. The innovative auto-alignment installation kit simplifies the application process, ensuring a precise fit. This product is designed to be compatible with all Spigen cases for iPhone 11 and iPhone XR.

Image: Spigen GlasTR EZ FIT Screen Protector packaging and product view.

2. Compatibility

This screen protector is specifically designed for the 6.1-inch display of the iPhone 11 and iPhone XR. It is not compatible with iPhone 11 Pro, iPhone 12, or iPhone 12 Pro models.

Image: Visual guide confirming compatibility with iPhone 11 and iPhone XR (6.1 inch) and incompatibility with iPhone 12 and iPhone 12 Pro (6.1 inch).

3. What's Included

Each package contains:

• Spigen GlasTR EZ FIT Tempered Glass Screen Protector (2 count)
• Auto-alignment installation kit (EZ Fit Tray)
• Cleaning wipe
• Dust removal sticker
• Microfiber cloth

Image: Exploded view diagram illustrating the EZ Fit Tray, alignment film, and tempered glass screen protector.

4. Installation Guide

Follow these steps for a bubble-free and perfectly aligned installation:

1. Clean the Screen: Use the included cleaning wipe to thoroughly clean your iPhone screen. Ensure all smudges and fingerprints are removed. Follow up with the microfiber cloth to dry the screen completely.
2. Remove Dust: Use the dust removal sticker to pick up any remaining dust particles from the screen. Inspect the screen carefully under good lighting to ensure it is completely dust-free.
3. Position the EZ Fit Tray: Place your iPhone into the EZ Fit Tray. Ensure the phone is securely seated and aligned within the tray.
4. Apply the Screen Protector: Remove the protective film from the adhesive side of the screen protector. Carefully lower the screen protector, which is integrated into the EZ Fit Tray, onto your iPhone screen. The tray will automatically align the protector.
5. Press and Slide: Once the screen protector is in place, gently press down on the center of the screen protector and slide your finger across to ensure it adheres evenly.
6. Remove the Tray: Carefully lift the EZ Fit Tray away from your iPhone. The screen protector should now be perfectly applied to your screen.
7. Final Touches: Use the microfiber cloth to gently press out any small bubbles that may remain. Most small bubbles will disappear within 24-48 hours.

Image: Overview of the three-step installation process using the EZ Fit Tray.

Image: The EZ Fit Tray being lowered onto an iPhone for quick and easy installation.

Installation Video Guides:

5. Operating Instructions

Once installed, the Spigen GlasTR EZ FIT screen protector provides a clear and responsive layer of protection for your device.

• Touch Sensitivity: The screen protector maintains the original touch sensitivity of your iPhone screen, ensuring an undisturbed and quick touch response.
• Visual Clarity: Enjoy crystal clear viewing with the original display quality preserved, free from blemishes.
• Case Compatibility: The design ensures a flawless fit with all Spigen iPhone 11 / XR cases, allowing you to use your preferred protective case without interference.

Image: Demonstrates intuitive and quick touch response with the screen protector applied.

Image: Illustrates the crystal clear quality of the screen protector, preserving the original display without blemishes.

Image: Shows the screen protector's case compatibility, fitting flawlessly with Spigen cases.

6. Maintenance

To keep your screen protector clean and clear:

• Wipe the screen protector gently with a soft, lint-free cloth (like the included microfiber cloth) to remove fingerprints and smudges.
• For stubborn marks, slightly dampen the cloth with water or a screen-safe cleaner. Avoid harsh chemicals or abrasive materials.
• The oleophobic coating helps resist oils and fingerprints, making cleaning easier.

Image: Illustrates the screen protector's ability to protect the screen from daily scratches.

7. Troubleshooting

If you encounter issues during or after installation:

• Bubbles: Small bubbles often disappear on their own within 24-48 hours. For larger bubbles, gently lift the nearest edge of the screen protector and reapply, using a credit card or similar tool wrapped in a microfiber cloth to push the air out towards the edge. Ensure the screen is clean before reapplication.
• Dust Particles: If dust is trapped under the protector, carefully lift an edge and use a dust removal sticker to dab the dust off the screen and the adhesive side of the protector.
• Misalignment: The EZ Fit Tray is designed for precise alignment. If misalignment occurs, it may be due to improper placement of the phone in the tray or not fully seating the phone. If a spare protector is available, reattempt installation carefully.

8. Specifications

9. Warranty and Support

The Spigen GlasTR EZ FIT Screen Protector comes with a 1-year warranty. For warranty claims, technical support, or further assistance, please visit the official Spigen website or contact their customer service directly. Keep your proof of purchase for warranty validation.

Official Spigen Store: Spigen Store on Amazon